Phase transformation behaviour of porous NiTi alloys fabricated by capsule-free hot isostatic pressing

Differential scanning calorimetry (DSC) was used to characterize the phase transformation behaviour of porous Ni50Ti50 alloys fabricated by capsule-free hot isostatic pressing (CF-HIP) with different cold compaction pressures. Experimental results reveal that a multi-stage martensitic transformation (MST) exists in the sintered porous NiTi alloys on cooling while the reverse transformation upon heating is either a single or two-stage phase transformation. The DSC thermal analysis indicates that the cold compaction pressure has great effect on the subsequent transformation temperatures. Generally, the phase transformation temperatures of porous NiTi alloys with lower cold compaction pressure are higher than those compacted with higher pressure. With increase in the annealing time, the transformation temperatures increase quickly when the cold compaction pressure was 150MPa. On the other hand, the transformation temperatures change only slightly when the cold compaction pressure was varied from 300MPa to 400MPa. These phenomena can be attributed to the combined effect of larger plastic deformation with higher dislocations density produced by cold compaction and the precipitation of the second phase in the porous NiTi alloys.published_or_final_versio

Characteristics of nonmethane hydrocarbons (NMHCs) in industrial, industrial-urban, and industrial-suburban atmospheres of the Pearl River Delta (PRD) region of south China

In a study conducted in late summer 2000, a wide range of volatile organic compounds (VOCs) were measured throughout five target cities in the Pearl River Delta (PRD) region of south China. Twenty-eight nonmethane hydrocarbons (NMHCs; 13 saturated, 9 unsaturated, and 6 aromatic) are discussed. The effect of rapid industrialization was studied for three categories of landuse in the PRD: Industrial, industrial-urban, and industrial-suburban. The highest VOC mixing ratios were observed in industrial areas. Despite its relatively short atmospheric lifetime (2-3 days), toluene, which is largely emitted from industrial solvent use and vehicular emissions, was the most abundant NMHC quantified. Ethane, ethene, ethyne, propane, n-butane, i-pentane, benzene, and m-xylene were the next most abundant VOCs. Direct emissions from industrial activities were found to greatly impact the air quality in nearby neighborhoods. These emissions lead to large concentration variations for many VOCs in the five PRD study cities. Good correlations between isoprene and several short-lived combustion products were found in industrial areas, suggesting that in addition to biogenic sources, anthropogenic emissions may contribute to urban isoprene levels. This study provides a snapshot of industrial, industrial-urban, and industrial-suburban NMHCs in the five most industrially developed cities of the PRD. Increased impact of industrial activities on PRD air quality due to the rapid spread of industry from urban to suburban and rural areas, and the decrease of farmland, is expected to continue until effective emission standards are implemented. Copyright 2006 by the American Geophysical Union

Biomimetic deposition of apatite on surface chemically modified porous NiTi shapememory alloy

Porous NiTi shape memory alloy (SMA) with 48% porosity and an average pore size of 50800 μm was synthesized by capsule-free hot isostatic pressing (CF-HIP). To enhance the surface bioactivity, the porous NiTi SMA was subjected to H"2O"2 and subsequent NaOH treatment. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy analyses revealed that a porous sodium titanate (Na"2TiO"3) film had formed on the surface of the porous NiTi SMA. An apatite layer was deposited on this film after immersion in simulated body fluid at 37°C, while no apatite could be found on the surface of the untreated porous NiTi SMA. The formation of the apatite layer infers that the bioactivity of the porous NiTi SMA may be enhanced by surface chemical treatment, which is favorable for its application as bone implants. © 2008 World Scientific Publishing Company.postprin

The virtual organizing process—A critical tool for enterprise competitiveness in the information era

The term virtual enterprise has generated considerable confusion because of its rather liberal interpretation. This paper argues that the successful establishment of a virtual enterprise is mainly dependent on the virtual organizing processes of an enterprise\u27s strategies ( VOPES), rather than on the actual manifested transformation of the whole into a single virtual organization. A three-dimensional dynamic framework for VOPES is presented, with the aim of providing a coherent model for positioning the various virtual organizing strategies, and at the same time giving VOPES dynamic tendencies towards market negotiation, co-operation, co-ordination and collaboration. To achieve a competitive advantage, the top management of an enterprise operating in an intense information environment can organize their enterprise virtually by using the three-dimensional framework of: virtual customer relationship, virtual outsourcing, and virtual knowledge and expertise. The generic IT architecture of VOPES is also described and discussed

The Interaction between the First Transmembrane Domain and the Thumb of ASIC1a Is Critical for Its N-Glycosylation and Trafficking

Acid-sensing ion channel-1a (ASIC1a), the primary proton receptor in the brain, contributes to multiple diseases including stroke, epilepsy and multiple sclerosis. Thus, a better understanding of its biogenesis will provide important insights into the regulation of ASIC1a in diseases. Interestingly, ASIC1a contains a large, yet well organized ectodomain, which suggests the hypothesis that correct formation of domain-domain interactions at the extracellular side is a key regulatory step for ASIC1a maturation and trafficking. We tested this hypothesis here by focusing on the interaction between the first transmembrane domain (TM1) and the thumb of ASIC1a, an interaction known to be critical in channel gating. We mutated Tyr71 and Trp287, two key residues involved in the TM1-thumb interaction in mouse ASIC1a, and found that both Y71G and W287G decreased synaptic targeting and surface expression of ASIC1a. These defects were likely due to altered folding; both mutants showed increased resistance to tryptic cleavage, suggesting a change in conformation. Moreover, both mutants lacked the maturation of N-linked glycans through mid to late Golgi. These data suggest that disrupting the interaction between TM1 and thumb alters ASIC1a folding, impedes its glycosylation and reduces its trafficking. Moreover, reducing the culture temperature, an approach commonly used to facilitate protein folding, increased ASIC1a glycosylation, surface expression, current density and slowed the rate of desensitization. These results suggest that correct folding of extracellular ectodomain plays a critical role in ASIC1a biogenesis and function

New plasma surface-treated memory alloys: Towards a new generation of "smart" orthopaedic materials

This paper describes the corrosion resistance, surface mechanical properties, cyto-compatibility, and in-vivo performance of plasma-treated and untreated NiTi samples. Nickel-titanium discs containing 50.8% Ni were treated by nitrogen and carbon plasma immersion ion implantation (PIII). After nitrogen plasma treatment, a layer of stable titanium nitride is formed on the NiTi surface. Titanium carbide is also found at the surface after carbon plasma implantation. Compared to the untreated samples, the corrosion resistances of the plasma PIII samples are better by a factor of five and the surface hardness and elastic modulus are better by a factor of two. The concentration of Ni leached into the simulated body fluids from the untreated samples is 30 ppm, whereas that from the plasma-treated PIII are undetectable. Although there is no significant difference in the ability of cells to grow on either surface, bone formation is found to be better on the nitrogen and carbon PIII sample surfaces at post-operation 2 weeks. All these improvements can be attributed to the formation of titanium nitride and titanium carbide on the surface. © 2007 Elsevier B.V. All rights reserved.postprin

Bioactivity and Corrosion Resistance of NiTi After Calcium Plasma Immersion Ion Implantation

Summary form only given. Plasma immersion ion implantation (PHI) is an effective approach to enhance the surface properties of various types of biomaterials. In order to enhance the surface bioactivity and corrosion resistance of NiTi shape memory alloy, calcium ions were implanted into NiTi alloys that have been pre-plasma-implanted with oxygen and nitrogen. The results are compared to samples without pre-treatment. The bioactivity of calcium-implanted NiTi was evaluated by immersion tests in simulated body fluid (SBF). The surface of NiTi before and after immersion tests was characterized by X-ray photoelectron spectroscopy (XPS). The XPS results reveal that the structure of the calcium-implanted layer in all the samples is composed of calcium oxide and gradually becomes a Ca-P layer after a period incubation in SBF. This Ca-P film also can be detected by scanning electron microscopy (SEM). To evaluate the anti-corrosion performance of NiTi, electrochemical potentiodynamic polarization tests were conducted on the NiTi samples in SBF. NiTi samples with pre-oxygen and nitrogen plasma implantation exhibit better corrosion resistance than single calcium-implanted samples. Our results indicate that calcium implantation can enhance the bioactivity of NiTi alloy due to the formation of calcium phosphate on the surface of the alloy. Plasma ion implantation can also improve the corrosion resistance of NiTi.published_or_final_versio

Characteristics of nonmethane hydrocarbons (NMHCs) in industrial, industrial-urban, and industrial-suburban atmospheres of the Pearl River Delta (PRD) region of south China

Author name used in this publication: Chan, Lo-Yin.Author name used in this publication: Chan, Chuen-Yu.2005-2006 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

mTOR Is Essential for the Proteotoxic Stress Response, HSF1 Activation and Heat Shock Protein Synthesis

The target of rapamycin (TOR) is a high molecular weight protein kinase that regulates many processes in cells in response to mitogens and variations in nutrient availability. Here we have shown that mTOR in human tissue culture cells plays a key role in responses to proteotoxic stress and that reduction in mTOR levels by RNA interference leads to increase sensitivity to heat shock. This effect was accompanied by a drastic reduction in ability to synthesize heat shock proteins (HSP), including Hsp70, Hsp90 and Hsp110. As HSP transcription is regulated by heat shock transcription factor 1 (HSF1), we examined whether mTOR could directly phosphorylate this factor. Indeed, we determined that mTOR could directly phosphorylate HSF1 on serine 326, a key residue in transcriptional activation. HSF1 was phosphorylated on S326 immediately after heat shock and was triggered by other cell stressors including proteasome inhibitors and sodium arsenite. Null mutation of S326 to alanine led to loss of ability to activate an HSF1-regulated promoter-reporter construct, indicating a direct role for mTOR and S326 in transcriptional regulation of HSP genes during stress. As mTOR is known to exist in at least two intracellular complexes, mTORC1 and mTOR2 we examined which complex might interact with HSF1. Indeed mTORC1 inhibitor rapamycin prevented HSF1-S326 phosphorylation, suggesting that this complex is involved in HSF1 regulation in stress. Our experiments therefore suggest a key role for mTORC1 in transcriptional responses to proteotoxic stress

Dietary behavior and knowledge of dental erosion among Chinese adults

<p>Abstract</p> <p>Objectives</p> <p>To study the dietary behavior and knowledge about dental erosion and self-reported symptoms that can be related to dental erosion among Chinese adults in Hong Kong.</p> <p>Methods</p> <p>Chinese adults aged 25-45 years were randomly selected from a list of registered telephone numbers generated by computer. A telephone survey was administered to obtain information on demographic characteristics, dietary habits, dental visits, and knowledge of and presence of self-reported symptoms that can be related to dental erosion.</p> <p>Results</p> <p>A total of 520 participants were interviewed (response rate, 75%; sampling error, ± 4.4%) and their mean age was 37. Most respondents (79%) had ever had caries, and about two thirds (64%) attended dental check-ups at least once a year. Respondents had a mean of 5.4 meals per day and 36% had at least 6 meals per day. Fruit (89%) and lemon tea/water (41%) were the most commonly consumed acidic food and beverage. When asked if they ever noticed changes in their teeth, most respondents (92%) said they had experienced change that can be related to erosion. However, many (71%) had never heard about dental erosion and 53% mixed up dental erosion with dental caries.</p> <p>Conclusion</p> <p>Hong Kong Chinese adults have frequent intake of food and many have experienced symptoms that can be related to dental erosion. Their level of awareness of and knowledge about dental erosion is generally low, despite most of them have regular dental check-ups. Dental health education is essential to help the public understand dental erosion and its damaging effects.</p