177,383 research outputs found
MEMS flow sensors for nano-fluidic applications
This paper presents micromachined thermal sensors for measuring liquid flow rates in the nanoliter-per-minute range. The sensors use a boron-doped polysilicon thinfilm heater that is embedded in the silicon nitride wall of a microchannel. The boron doping is chosen to increase the heater’s temperature coefficient of resistance within tolerable noise limits, and the microchannel is suspended from the substrate to improve thermal isolation. The sensors have demonstrated a flow rate resolution below 10 nL/min, as well as the capability for detecting micro bubbles in the liquid. Heat transfer simulation has also been performed to explain the sensor operation and yielded good agreement with experimental data
Improved thermal performance of a large laminated lithium-ion power battery by reciprocating air flow
The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.Thermal safety issues are increasingly critical for large-size laminated Lithium-Ion Batteries (LIBs). Despite a number of investigations conducted on the Battery Thermal Management System (BTMS) with reciprocating air-flow cooling, large laminated power LIBs are still not sufficiently investigated, particularly in the view of battery thermal characteristics. The present study investigates the thermal behaviors of an air-cooled NCM-type LIB (LiNi1−x−yCoxMnyO2 as cathode) from an experimental and systematic approach. The temperature distribution was acquired from different Depth of Discharge (DOD) by the infrared imaging (IR) technology. A reciprocating air-flow cooling method was proposed to restrict the temperature fluctuation and homogenize temperature distribution. Results showed that there was a remarkable temperature distribution phenomenon during the discharge process, the temperature distribution was affected by direction of air-flow. Forward air-flow (from current collector side to lower part of battery) was always recommended at the beginning of the discharge due to the thermal characteristics of the battery. After comprehensive consideration on battery temperature limit and cooling effect, the desired initial reversing timing was about 50% DOD at 3 C discharge rate. Different reversing strategies were investigated including isochronous cycles and aperiodic cycles. It was found that the temperature non-uniformity caused by heat accumulation and concentration was mitigated by reciprocating air-flow with optimized reversing strategy
Exclusive Decays and CP Violation in the General two-Higgs-doublet Model
We calculate all the branching ratios and direct CP violations of
decays in a most general two-Higgs-doublet model with spontaneous CP violation.
As the model has rich CP-violating sources, it is shown that the new physics
effects to direct CP violations and branching ratios in some channels can be
significant when adopting the generalized factorization approach to evaluate
the hadronic matrix elements, which provides good signals for probing new
physics beyond the SM in the future B experiments.Comment: 21 page
Infrared imaging investigation of temperature fluctuation and spatial distribution for a large laminated lithium ion power battery
The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.The present study investigates the thermal behaviors of a naturally cooled NCM-type LIB (LiNi1−x−yCoxMnyO2 as cathode) from an experimental and systematic approach. The temperature distribution was acquired for different discharge rates and Depth of Discharge (DOD) by the infrared imaging (IR) technology. Two new factors, the temperature variance ( ) and local overheating index (LOH index), were proposed to assess the temperature fluctuation and distribution. Results showed that the heat generation rate was higher on the cathode side than that on the anode side due to the different resistivity of current collectors. For a low-power discharge, the eventual stable high-temperature zone occurred in the center of the battery, while with a high-power discharge, the upper part of the battery was the high temperature region from the very beginning of discharge. It was found that the temperature variance ( ) and local overheating index (LOH index) were capable of holistically exhibiting the temperature non-uniformity both on numerical fluctuation and spatial distribution with varying discharge rates and DOD. With increasing the discharge rate and DOD, temperature distribution showed an increasingly non-uniform trend, especially at the initial and final stage of high-power discharge, the heat accumulation and concentration area increased rapidly
- …