Penrose-Onsager Criterion Validation in a One-Dimensional Polariton Condensate

We perform quantum tomography on one-dimensional polariton condensates, spontaneously occurring in linear disorder valleys in a CdTe planar microcavity sample. By the use of optical interferometric techniques, we determine the first-order coherence function and the amplitude and phase of the order parameter of the condensate, providing a full reconstruction of the single particle density matrix for the polariton system. The experimental data are used as input to theoretically test the consistency of Penrose-Onsager criterion for Bose-Einstein condensation in the framework of nonequilibrium polariton condensates. The results confirm the pertinence and validity of the criterion for a non equilibrium condensed gas.Comment: 5 pages, 4 figure

Comparison of arrival time estimate methods for partial discharge pulses in power cables

Accurate location of partial discharges in power cable systems, based on arrival times, is critical for the identification and assessment of defects. This paper evaluates different time-of-arrival algorithms in order to determine which method yields most accurate location under different circumstances. These methods are based on threshold, Akaikepsilas information criterion, energy criterion, Gaborpsilas signal epoch and phase in frequency domain. Several criteria are defined by which the algorithms are evaluated. These criteria include the sensitivity to noise, pulse shape and effect of load impedance. The sensitivity of the methods upon varying these quantities is evaluated analytically and by means of simulations. From the results the energy criterion method and the phase method show the best performanc

Influence of ring-main-units and substations on the propagation of PD pulses

Partial discharge (PD) location in online diagnostics on medium voltage cables is achieved using a sensor at each cable end. Monitoring consecutive cables with a single monitoring system would, however, be more efficient. Moreover, substations and ring main units (RMU) along a cable connection without possibilities for sensor installation can be circumvented by installing the sensor at the next RMU. This paper studies the influence of RMUs and substations along the cable under test on online PD monitoring, including their influence on detection sensitivity, location accuracy and charge estimate accuracy. Models for RMUs and substation are proposed and verified by measurements. The performance of online PD monitoring is studied for a number of network configurations

Measurement of transmission line parameters of three-core power cables with common earth screen

In power cables fast transient signals arise because of partial discharges. These signals propagate to the cable ends where they can be detected for diagnostic purposes. To enable optimal detection sensitivity and to judge their severity the propagation parameters Z c (characteristic impedance) and ÿ¿ (propagation coefficient) need to be known. A three-core power cable with a single metallic earth screen around the assembly of the cores has multiple, coupled propagation modes with corresponding characteristic impedances and propagation coefficients. This paper presents a practical method to measure and analyse the cable parameters. The propagation modes are decoupled into a modal solution. The modal solution is interpreted in terms of convenient propagation modes: a shield-to-phase (SP) propagation mode between conductors and earth screen and two identical phase-to-phase (PP) modes between conductors. The measurement method, based on a pulse response measurement, to determine all transmission line parameters of the SP and PP modes is proposed and tested on a cable sample. The model is validated by predicting the time, shape and amplitude of multiple reflections in all modes resulting from an injected pulse

Aprotinin reduces cardiac troponin I release and inhibits apoptosis of polymorphonuclear cells during off-pump coronary artery bypass surgery

Objectives: In addition to blood-sparing effects, aprotinin may have cardioprotective and anti-inflammatory effects during cardiopulmonary bypass-assisted cardiac surgery. In this study, the authors examined whether aprotinin had cardioprotective and/or anti-inflammatory effects in patients undergoing off-pump coronary artery bypass grafting. Design: A prospective randomized clinical trial. Setting: University hospital. Participants: Fifty patients were randomized to control (n = 25) or aprotinin treatment (n = 25) groups. Interventions: Aprotinin was given as a loading dose (2 x 10(6) KIU) followed by a continuous infusion at 5 x 10(5) KIU/h until skin closure. Measurements and Main Results: Blood samples for cardiac troponin I; interleukin-6, interleukin-8, and interleukin-10; tumor necrosis factor a; and elastase were taken after anesthesia induction, completion of revascularization, and 6 hours, 12 hours, and 24 hours after revascularization. Blood samples were taken to assess for apoptosis in polymorphonuclear cells. Baseline plasma levels for cardiac troponin I did not differ between groups but were significantly lower in aprotinin-treated patients at the time of revascularization (P = 0.03) and 6 hours (p = 0.004) and 24 hours (p = 0.03) later. Aprotinin significantly reduced apoptosis in polymorphonuclear cells compared with control-treated patients (p = 0.04). There were no differences in plasma cytokine or elastase levels between groups. Conclusions: The authors conclude that aprotinin reduces perioperative cardiac troponin I release and attenuates apoptosis in polymorphonuclear cells but has no significant effects on plasma cytokine levels in patients undergoing off-pump coronary artery bypass graft surgery

Direct magneto-optical compression of an effusive atomic beam for high-resolution focused ion beam application

An atomic rubidium beam formed in a 70 mm long two-dimensional magneto-optical trap (2D MOT), directly loaded from a collimated Knudsen source, is analyzed using laser-induced fluorescence. The longitudinal velocity distribution, the transverse temperature and the flux of the atomic beam are reported. The equivalent transverse reduced brightness of an ion beam with similar properties as the atomic beam is calculated because the beam is developed to be photoionized and applied in a focused ion beam. In a single two-dimensional magneto-optical trapping step an equivalent transverse reduced brightness of $(1.0\substack{+0.8-0.4})$ $\times 10^6$ A/(m$^2$ sr eV) was achieved with a beam flux equivalent to $(0.6\substack{+0.3-0.2})$ nA. The temperature of the beam is further reduced with an optical molasses after the 2D MOT. This increased the equivalent brightness to $(6\substack{+5-2})$$\times 10^6$ A/(m$^2$ sr eV). For currents below 10 pA, for which disorder-induced heating can be suppressed, this number is also a good estimate of the ion beam brightness that can be expected. Such an ion beam brightness would be a six times improvement over the liquid metal ion source and could improve the resolution in focused ion beam nanofabrication.Comment: 10 pages, 8 figures, 1 tabl

Electromagnetic time reversal applied to online partial discharge location in power cables: influence of interfering reflections from the cable circuit

In online single-sided partial discharge (PD) location settings, PD reflection patterns are affected by all components present in the cable circuit. This paper describes the performance of electromagnetic time reversal (EMTR) when interfering reflections contribute to the transient waveforms emitted by the PD. The analysed situation refers to a ring main unit (RMU) in the medium voltage (MV) grid where PD recordings are disturbed by signals reflected from the other cables connected to the RMU, potentially affecting the PD location accuracy. We show that the accuracy of EMTRbased location methods is unaffected by such effects