Structural and other adaptation to long-term flooding by trees in Central Amazonia

Cross section discs were taken from 66 tree species at two sites in the Central Amazonian inundation forest, near Manaus (Brazil) and analysed macroscopically with respect to the occurrence and formation of growth zones. Dendroclimatological investigation and a succesfully applied dating survey using the 14C method (nuclear arms effect) showed, that trees in the igapó and várzea produce more or less distinct annual rings. The boundaries of the growth zones are marked mainly by marginal parenchyma bands and by the decreasing size and thickened walls of the fibre cells. These formations indicate deceleration, followed by suspension, of cambial activity as a reaction to unfavourable climatic conditions such as drought, low temperature or, in the present case, long term flooding. Adaptative strategies of trees to long term inundation are discussed. The formation of growth zones and the distinctiveness of the annual ring boundaries are related to defoliation behaviour, peculiar to each species

Wear-adaptive optimization of in-process conditioning parameters during face plunge grinding of PcBN

Polycrystalline cubic boron nitride is a very hard material. Machining of this material is performed by grinding with diamond tools. Due to its high hardness, grinding tools are subjected to severe microscopic and macroscopic tool wear. This wear leads to short tool life and results in high effort in conditioning the abrasive layer. Contrary to the usual conditioning of diamond grinding wheels with diamond dressing tools, this study investigates a conditioning process based entirely on the use of white corundum cup rolls. These conditioning tools allow the in-process face plunge conditioning of vitrified bond diamond grinding tools. The circumferential speed of the conditioning tool and the average grain diameter of the corundum are identified as the main factors influencing the topography of the generated grinding layer. To describe the performance of the conditioning process, a specific conditioning removal rate Q′sd is derived. This parameter represents a cumulated variable that allows a comparison of different conditioning strategies. It is shown that an increase in Q′sd significantly counteracts microscopic wear on the abrasive layer. Therefore, optimized process parameters enable the process of in-process conditioning to significantly reduce wear on the grinding tool without increasing the process time or the non-productive time

Influence of dressing strategy on tool wear and performance behavior in grinding of forming tools with toric grinding pins

The performance of grinding tools in grinding processes and the resulting surface and subsurface properties depend on various factors. The condition of the grinding tool after dressing is one of these factors. However, the influence of the dressing process on the condition of the grinding tool depends on the selected process parameters and is difficult to predict. Therefore, this paper presents an approach to describe the influence of the dressing process on tool wear of toric grinding pins and the resulting subsurface modification. For this purpose, toric grinding pins with a vitrified bond were dressed with two different strategies and the wear and operational behavior were investigated when grinding AISI M3:2 tool steel with two different grinding strategies. In general, the investigations have shown that the dressing process influences the performance and wear behavior differently depending on the grinding strategy used. The degree of clogging is influenced by the geometric contact sizes. In the case of small engagement cross sections with simultaneously large contact lengths the thermal tool load is distributed over a small annular area of the tool and favors clogging. Crushing and additional transverse loading of the grains result in an almost clog-free tool surface. This also leads to a lower G-ratio. Crushing leads to an intensified decrease of the torus radii. The influence of the dressing strategy can also be observed in the induced residual stresses. Toric grinding pins dressed by crushing induce lower compressive residual stresses into the workpiece, which can be attributed to the self-sharpening effect. This effect reduces the mechanical and thermomechanical load of the workpiece during machining

Structure and Floristic Composition of Flood Plain Forests in the Peruvian Amazon. II. The Understorey of Restinga Forests

Structure and floristic composition of small trees and shrubs (1.5 m height to 10 cm diameter at breast height was described in two flood plain forests of the lower Ucayali river, Peruvian Amazon. The forests were of the high and low restinga type, on an annual average flooded around 1 and 2 months, respectively. The soils were nutrient rich entisols, and the vegetation forms closed high canopy forests with presence of emergents. A total of 25 permanent sample plots covering 0.64 ha were established. They were nested within six quadratic 1 ha permanent sample plots where large individuals (>10 cm DBH) were inventoried. Overall average density and basal area of the understorey were 4458 ha and 5.0 m2 /ha, respectively. The families of Moraceae, Leguminosae, Annonaceae, Euphorbiaceae, and Lauraceae were among the most important tree families, while important shrub and small tree families were Violaceae, Rubiaceae, Melastomataceae, and Olacaceae. Two hundred eight and 204 tree species were registered in the restinga forest overstories and understories, respectively. Fifty-six percent of the species were shared between the two forest strata, while around 22% were confined to each of them. Species present only in the understorey were predominantly shrubs or treelets, while some of the species with a presence only in the overstorey were probably early succession species about to disappear from the forests

Process-related characteristic–based topography evaluation of wear conditions on grinding wheels

Non-productive auxiliary processes affect the single part and small badge production of milling tools. The key production process grinding is inevitably linked to the auxiliary conditioning process. The time demand of those process steps decreases the overall productivity of the manufacturing process. However, today the machine operator decides on conditioning cycles individually by the use of experience. Until today, there is no objective data based approach available that supports the initiation of these conditioning processes or the adaption of the grinding process itself in order to improve its process efficiency. For this purpose, a process-related topography evaluation method of the grinding wheel surface is developed within this study. For the measurement, an optical method based on laser triangulation is used. The measurement system is implemented into a common tool grinding machine tool. In addition, characteristic topography values are defined that show the wear conditions of the grinding tool. Moreover, the data is summarized in a database of wear conditions. The developed measurement method can save grinding and dressing tool resources, process times and minimizes scrap parts. In addition, an adaptation of the process and a targeted launch of auxiliary processes can be enabled. The novel characteristic-based topography measurement creates the opportunity to enhance the tool life of the grinding wheels up to 30% without losing productivity

Comparative AMS radiocarbon dating of pretreated versus non-pretreated tropical wood samples

Author Posting. © The Author(s), 2009. This is the author's version of the work. It is posted here by permission of Elsevier B.V. for personal use, not for redistribution. The definitive version was published in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 268 (2010): 910-913, doi:10.1016/j.nimb.2009.10.062.Several wood samples collected from Dorslandboom, a large African baobab (Adansonia digitata L.) from Namibia, were investigated by AMS radiocarbon dating subsequent to pretreatment and, alternatively, without pretreatment. The comparative statistical evaluation of results showed that there were no significant differences between fraction modern values and radiocarbon dates of the samples analyzed after pretreatment and without pretreatment, respectively. The radiocarbon date of the oldest sample was 993 ± 20 BP. Dating results also revealed that Dorslandboom is a multi-generation tree, with several stems showing different ages.This material is based on work supported by U.S. National Science Foundation under Cooperative Agreement OCE-022828996. Part of the research was supported by grants from the Romanian Academy and the Romanian National University Research Council (PN II – ID 2354) and also by Nova Research Inc

Health related quality of life of Canary Island citizens

<p>Abstract</p> <p>Background</p> <p>The aim of the study was to describe the health-related quality of life of Canarian population using information from the Canary Island Health Survey and three observational studies developed in the Canary Islands.</p> <p>Methods</p> <p>A descriptive analysis was carried out on a sample of 5.549 Canarian citizens using information from 2004 Canary Island Health Survey and three observational studies on Alzheimer's disease, Stroke and HIV. EQ-5 D was the generic tool used for revealing quality of life of people surveyed. Besides the rate of people reporting moderate or severe decrease in quality of life, TTO-index scores and visual analogue scale were used for assessing health related quality of life of people that suffer a specific diseases and general population.</p> <p>Results</p> <p>Self-perceived health status of citizens that suffer chronic diseases of high prevalence, identifies by the Canary Island Health Survey and other diseases such Alzheimer's disease, Stroke and HIV, independently examined in observational studies, are worse than self-perceived health of general population. Depression/anxiety and pain/discomfort were identified as the dimensions of the EQ-5 D with highest prevalence of problems. Alzheimer's disease and stroke were the illnesses with greater loss of quality of life.</p> <p>Conclusions</p> <p>Health related quality of life should be integrated into a set of information along with expectancy of life, incidence and prevalence of chronic diseases for developing health policy and planning health care activities The combination of information on health related quality of life from population health surveys with data from observational studies enlarges the sources of relevant information for setting health priorities and assessing the impact of health policies.</p

Structure and Floristic Composition of Flood Plain Forests in the Peruvian Amazon I. Overstorey

Three Peruvian flood plain forests adjacent to the Ucayali river were sampled using nine 1 ha permanent sample plots in which stems exceeding 10 cm DBH were identified and measured. These plots were measured four times during 1993-1997. Three plots were established in each of the three forest types high restinga, low restinga, and tahuampa, characterised in part by an annual inundation of one, two and four months per year, respectively. Stem density varied from 446 to 601 per hectare, and the basal area ranged between 20 and 29 m2/ha. A total of 321 species were recorded in the nine hectare sample, with 88-141 species in each 1 ha plot. Species composition indicated a relatively low similarity between the forest types. Plots with the longest flooding contained the most species, expressed both as per unit area as well as per 1000 stems. The flood plain forests contained fewer tree species than adjacent non-flooded terra firme forest. Family importance values were calculated for each forest. In all three forests Leguminosae, Euphorbiaceae, Annonaceae and Lauraceae were important. The Moraceae family was conspicuous in both high restinga and low restinga. The Arecaceae and Meliaceae were notable in high restinga, as was Rubiaceae in low restinga. Lecythidaceae, Sapotaceae and Chrysobalanaceae exhibited relatively high values in the tahuampa forest. High species importance values were obtained for Maquira coriacea, Guarea macrophylla, Terminalia oblonga, Spondias mombin, Ceiba pentandra, Hura crepitans, Eschweilera spp., Canipsiandra angustifolia, Pouteria spp., Licania micrantha, Parinari excelsa and Calycophyllum spruceanum. Among the species of smaller stature, Drypetes amazonica, Leonia glycicarpa, Theobroma cacao and Protium nodulosum attained high values