1,055 research outputs found

    Development of Interatomic Potentials for Supported Nanoparticles: The Cu/ZnO Case

    Get PDF
    We present a potential model that has been parametrized to reproduce accurately metal−metal oxide interactions of Cu clusters supported on ZnO. Copper deposited on the nonpolar (101̅0) ZnO surface is investigated using the new pairwise Cu–ZnO interatomic potentials including repulsive Born–Mayer Cu–O and attractive Morse Cu–Zn potentials. Parameters of these interactions have been determined by fitting to periodic supercell DFT data using different surface terminations and Cu cluster sizes. Results of interatomic potential-based simulations show a good agreement both structurally and energetically with DFT data, and thus provide an efficient filter of configurations during a search for low DFT energy structures. Upon examining the low energy configurations of Cu clusters on ZnO nonpolar surfaces for a range of cluster sizes, we discovered why Cu islands are commonly observed on step edges on the (101̅0) surface but are rarely seen on terraces

    Dynamic qualitative bolt force measurements for investigating influence factors on the pushout effect of small calibre ammunition

    Get PDF
    A small calibre weapon system consists of the weapon and the ammunition. In the case of bolt action rifles during the process of firing, the breech is a rigid bearing which prevents the casing from being pushed out. However, not the whole pushout force is taken by the bolt. Due to friction forces at the casing boundary, the chamber of the weapon can absorb a significant part of the pushout force. The duration of the pushout force is in the order of milliseconds. Piezoelectric strain gauges are capable of recording such short time events qualitatively. To increase the measurability of force obtained from raw signal, is filtered using a bandpass filter and applying a signal envelope. The results from the strain gauges are verified by a piezoelectric force washer. In this paper, two different lubrication states and two different casing materials are analysed to evaluate their influences on the force absorbed by the bolt. The analysis indicated that lubricated casings lead to bolt forces which are more than three times higher when compared unlubricated casings. The unlubricated steel casing also showed a significant lower bolt force when compared with the regular brass casing. However, this effect is reversed, if the casing is lubricated. This work demonstrates how to measure highly dynamic events. The acquired results can be directly applied to 5.56x45 bolt action rifles. These measurements may also have a significant influence on self-loading rifles, since the process of reloading is also dependent on the pushout force. The general application area is target competitive shooting and military purposes

    Dibutyryl Cyclic AMP Modulates Keratinocyte Migration Without Alteration on Integrin Expression

    Get PDF
    Cyclic adenosine monophosphate (cAMP) has long been regarded as a second messenger and a regulator of human keratinocyte proliferation. It has been demonstrated that cAMP inhibits keratinocyte proliferation when used at high concentrations. Nevertheless, new recent reports have demonstrated that cAMP may stimulate or inhibit keratinocyte growth depending upon the concentration used. Studies to examine the influence of cAMP upon the migration of other cell types have been contradictory. To determine the direct effect of dibutyryl cAMP (DBcAMP) upon human keratinocyte migration, we used a quantitative locomotion assay using a wide range of DBcAMP concentrations. We found a bi-phasic effect of DBcAMP on keratinocyte migration across connective tissue matrices. Keratinocyte locomotion on the matrices was promoted at 10-5 M and 10-6 M of DBcAMP, but not at higher or lower concentrations. Timecourse experiments demonstrated that the effect of DBcAMP on keratinocyte locomotion and proliferation occurred independently. Fluorescence-activated cell sorter analysis demonstrated that the effect of DBcAMP on the migration of human keratinocytes was independent from the modulation of integrin receptors. Although the cellular mechanisms by which DBcAMP promotes keratinocyte migration is unclear, the addition of DBcAMP or TPA to keratinocyte cultures enhanced the synthesis of a 92-kDa metalloproteinase in association with enhanced cellular migration. These observations suggest a possible link between metalloproteinase expression and cellular migration

    Coral Disease and Health Workshop: Coral Histopathology II

    Get PDF
    The health and continued existence of coral reef ecosystems are threatened by an increasing array of environmental and anthropogenic impacts. Coral disease is one of the prominent causes of increased mortality among reefs globally, particularly in the Caribbean. Although over 40 different coral diseases and syndromes have been reported worldwide, only a few etiological agents have been confirmed; most pathogens remain unknown and the dynamics of disease transmission, pathogenicity and mortality are not understood. Causal relationships have been documented for only a few of the coral diseases, while new syndromes continue to emerge. Extensive field observations by coral biologists have provided substantial documentation of a plethora of new pathologies, but our understanding, however, has been limited to descriptions of gross lesions with names reflecting these observations (e.g., black band, white band, dark spot). To determine etiology, we must equip coral diseases scientists with basic biomedical knowledge and specialized training in areas such as histology, cell biology and pathology. Only through combining descriptive science with mechanistic science and employing the synthesis epizootiology provides will we be able to gain insight into causation and become equipped to handle the pending crisis. One of the critical challenges faced by coral disease researchers is to establish a framework to systematically study coral pathologies drawing from the field of diagnostic medicine and pathology and using generally accepted nomenclature. This process began in April 2004, with a workshop titled Coral Disease and Health Workshop: Developing Diagnostic Criteria co-convened by the Coral Disease and Health Consortium (CDHC), a working group organized under the auspices of the U.S. Coral Reef Task Force, and the International Registry for Coral Pathology (IRCP). The workshop was hosted by the U.S. Geological Survey, National Wildlife Health Center (NWHC) in Madison, Wisconsin and was focused on gross morphology and disease signs observed in the field. A resounding recommendation from the histopathologists participating in the workshop was the urgent need to develop diagnostic criteria that are suitable to move from gross observations to morphological diagnoses based on evaluation of microscopic anatomy. (PDF contains 92 pages

    Beam waist manipulations at the ATF2 interaction point

    No full text
    TH6PFP024International audienceThe ATF2 project is the ïŹnal focus system prototype for ILC and CLIC linear collider projects, with a purpose to reach a 37nm vertical beam size at the interaction point. We report on techniques developed based on simulation studies to adjust the horizontal and vertical beam waists independently in the presence of errors, at two diïŹ€erent IP locations where the beam size can be measured with diïŹ€erent accuracies. During initial commissioning, we will start with larger than nominal ÎČ -functions at the IP, to reduce the eïŹ€ects from higher-order optical aberrations and thereby simplify the optical corrections needed. The ïŹrst measurements in such intermediate ÎČ -conïŹgurations are reported

    Thermodynamically accessible titanium clusters TiN, N = 2-32

    Get PDF
    We have performed a genetic algorithm search on the tight-binding interatomic potential energy surface (PES) for small TiN (N = 2-32) clusters. The low energy candidate clusters were further refined using density functional theory (DFT) calculations with the PBEsol exchange-correlation functional and evaluated with the PBEsol0 hybrid functional. The resulting clusters were analysed in terms of their structural features, growth mechanism and surface area. The results suggest a growth mechanism that is based on forming coordination centres by interpenetrating icosahedra, icositetrahedra and Frank-Kasper polyhedra. We identify centres of coordination, which act as centres of bulk nucleation in medium sized clusters and determine the morphological features of the cluster

    Heterostructures of GaN with SiC and ZnO enhance carrier stability and separation in framework semiconductors

    Get PDF
    A computational approach, using the density functional theory, is employed to describe the enhanced electron‐hole stability and separation in a novel class of semiconducting composite materials, with the so‐called double bubble structural motif, which can be used for photocatalytic applications. We examine the double bubble containing SiC mixed with either GaN or ZnO, as well as related motifs that prove to have low formation energies. We find that a 24‐atom SiC sodalite cage inside a 96‐atom ZnO cage possesses electronic properties that make this material suitable for solar radiation absorption applications. Surprisingly stable, the inverse structure, with ZnO inside SiC, was found to show a large deformation of the double bubble and a strong localisation of the photo‐excited electron charge carriers, with the lowest band gap of ca. 2.15 eV of the composite materials considered. The nanoporous nature of these materials could indicate their suitability for thermoelectric applications. "This is the peer reviewed version of the following article: Heterostructures of GaN with SiC and ZnO enhance carrier stability and separation in framework semiconductors, which has been published in final form at https://doi.org/10.1002/pssa.201600440. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions.

    Exploring ultra-low ÎČ* values in ATF2 - R&D Programme proposal

    No full text
    We propose to explore the beam sizes and performance of the ATF2 Final Focus System for reduced IP beta functions up to a factor between 2 and 4 below its design. The results will demonstrate the feasibility of the system in a chromaticity regime of interest for CLIC and ILC

    Deep vs shallow nature of oxygen vacancies and consequent n -type carrier concentrations in transparent conducting oxides

    Get PDF
    The source of n -type conductivity in undoped transparent conducting oxides has been a topic of debate for several decades. The point defect of most interest in this respect is the oxygen vacancy, but there are many conflicting reports on the shallow versus deep nature of its related electronic states. Here, using a hybrid quantum mechanical/molecular mechanical embedded cluster approach, we have computed formation and ionization energies of oxygen vacancies in three representative transparent conducting oxides: In 2 O 3 , SnO 2 , and ZnO. We find that, in all three systems, oxygen vacancies form well-localized, compact donors. We demonstrate, however, that such compactness does not preclude the possibility of these states being shallow in nature, by considering the energetic balance between the vacancy binding electrons that are in localized orbitals or in effective-mass-like diffuse orbitals. Our results show that, thermodynamically, oxygen vacancies in bulk In 2 O 3 introduce states above the conduction band minimum that contribute significantly to the observed conductivity properties of undoped samples. For ZnO and SnO 2 , the states are deep, and our calculated ionization energies agree well with thermochemical and optical experiments. Our computed equilibrium defect and carrier concentrations, however, demonstrate that these deep states may nevertheless lead to significant intrinsic n -type conductivity under reducing conditions at elevated temperatures. Our study indicates the importance of oxygen vacancies in relation to intrinsic carrier concentrations not only in In 2 O 3 , but also in SnO 2 and ZnO
    • 

    corecore