10,081 research outputs found
Aquaporin 1a Expression in Gill, Intestine, and Kidney of the Euryhaline Silver Sea Bream
This study aimed to investigate the effects of chronic salinity acclimation, abrupt salinity transfer, and cortisol administration on aquaporin 1 (AQP1) expression in gill, intestine, and kidney of silver sea bream (Sparus sarba). An AQP1a cDNA was cloned and found to share 83–96% amino acid sequence identity with AQP1 genes from several fish species. Tissue distribution studies of AQP1a mRNA demonstrated that it was expressed in gill, liver, intestine, rectum, kidney, heart, urinary bladder, and whole blood. Semi-quantitative RT-PCR analysis was used to measure AQP1a transcript abundance in sea bream that were acclimated to salinity conditions of 0, 6, 12, 33, 50, and 70 ppt for 1 month. The abundance of gill AQP1a transcript was highest in sea bream acclimated to 0 ppt whereas no differences were found among 0–50 ppt groups. For intestine, the highest AQP1a transcript amounts were found in sea bream acclimated to 12 and 70 ppt whereas the transcript abundance of kidney AQP1a was found to be unchanged amongst the different salinity groups. To investigate the effects of acute salinity alterations on AQP1a expression, sea bream were abruptly transferred from 33 to 6 ppt. For intestine AQP1a levels were altered at different times, post transfer, but remained unchanged in gill and kidney. To study the effects of cortisol on AQP1a expression, sea bream were administered a single dose of cortisol followed by a 3-day acclimation to either 33 or 6 ppt. The findings from this experiment demonstrated that cortisol administration resulted in alterations of AQP1a transcript in gill and intestine but not in kidney
Advantages of inertial roll alignment technology in estimating web handling issues
Roll alignment plays a crucial part in eliminating web handling issues in manufacturing processes. Web handling issues due to roll misalignment includes tracking, tension control, uneven material gauge, and in some cases, misalignment alters the molecular properties of the material being produced.While the pace of the manufacturing industry has evolved, with machines today running faster than ever, commonly used roll alignment methods such as such as theodolites and transits has not change much. Such systems inherently contain errors as well as geometrical limitations in measuring rolls in machinery of various configurations. A few of these issues were addressed by the newer laser alignment devices but these systems still need to be set up roll by roll with a line of sight, therefore consuming valuable time.These issues are addressed with the invention of the inertial roll alignment method. The inertial roll alignment device eliminates geometrical limitations due to its highly engineered and compact design. The device does not require a line of sight because it has three ring laser gyroscopes that measure the x-y-z positions (or roll, pitch and yaw) of a roll in space. The inertial roll alignment method eliminates errors that are present in the other methods. The advantages of inertial roll alignment device are in terms of higher accuracy, precision, speed of data collection, compactness, and no line of sight needed. If rolls in machinery are aligned with the inertial roll alignment device, manufacturing processes would expect less web handling issues
Behavior of a movable electrode in piezo-response mode of an atomic force microscope
Author name used in this publication: C. H. XuAuthor name used in this publication: C. H. WooAuthor name used in this publication: S. Q. ShiAuthor name used in this publication: Y. Wang2003-2004 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe
Interplay between carrier and impurity concentrations in annealed GaMnAs intrinsic anomalous Hall Effect
Investigating the scaling behavior of annealed GaMnAs anomalous
Hall coefficients, we note a universal crossover regime where the scaling
behavior changes from quadratic to linear, attributed to the anomalous Hall
Effect intrinsic and extrinsic origins, respectively. Furthermore, measured
anomalous Hall conductivities when properly scaled by carrier concentration
remain constant, equal to theoretically predicated values, spanning nearly a
decade in conductivity as well as over 100 K in T. Both the qualitative
and quantitative agreement confirms the validity of new equations of motion
including the Berry phase contributions as well as tunablility of the intrinsic
anomalous Hall Effect.Comment: 4 pages, 5 figure
Spin relaxation in mesoscopic superconducting Al wires
We studied the diffusion and the relaxation of the polarized quasiparticle
spins in superconductors. To that end, quasiparticles of polarized spins were
injected through an interface of a mesoscopic superconducting Al wire in
proximity contact with an overlaid ferromagnetic Co wire in the single-domain
state. The superconductivity was observed to be suppressed near the
spin-injecting interface, as evidenced by the occurrence of a finite voltage
for a bias current below the onset of the superconducting transition. The spin
diffusion length, estimated from finite voltages over a certain length of Al
wire near the interface, was almost temperature independent in the temperature
range sufficiently below the superconducting transition but grew as the
transition temperature was approached. This temperature dependence suggests
that the relaxation of the spin polarization in the superconducting state is
governed by the condensation of quasiparticles to the paired state. The spin
relaxation in the superconducting state turned out to be more effective than in
the normal state.Comment: 9 pages, 8 figure
Wave Propagation in Lossy and Superconducting Circular Waveguides
We present an accurate approach to compute the attenuation of waves, propagating in circular waveguides with lossy and superconducting walls. A set of transcendental equation is developed by matching the fields at the surface of the wall with the electrical properties of the wall material. The propagation constant kz is found by numerically solving for the root of the equation. The complex conductivity of the superconductor is obtained from the Mattis-Bardeen equations. We have compared the loss of TE11 mode computed using our technique with that using the perturbation and Stratton’s methods. The results from the three methods agree very well at a reasonable range of frequencies above the cutoff. The curves, however, deviate below cutoff and at millimeter wave frequencies. We attribute the discrepancies to the dispersive effect and the presence of the longitudinal fields in a lossy waveguide. At frequencies below the gap, the superconducting waveguide exhibits lossless transmission behavior. Above the gap frequency, Cooper-pair breaking becomes dominant and the loss increases significantly
Evidence of metallic clustering in annealed Ga1-xMnxAs from atypical scaling behavior of the anomalous Hall coefficient
We report on the anomalous Hall coefficient and longitudinal resistivity
scaling relationships on a series of annealed Ga1-xMnxAs epilayers (x~0.055).
As-grown samples exhibit scaling parameter n of ~ 1. Near the optimal annealing
temperature, we find n ~ 2 to be consistent with recent theories on the
intrinsic origins of anomalous Hall Effect in Ga1-xMnxAs. For annealing
temperatures far above the optimum, we note n > 3, similar behavior to certain
inhomogeneous systems. This observation of atypical behavior agrees well with
characteristic features attributable to spherical resonance from metallic
inclusions from optical spectroscopy measurements.Comment: 3 pages, 3 figure
Dynamic Failure Properties of the Porcine Medial Collateral Ligament-Bone Complex for Predicting Injury in Automotive Collisions
The goal of this study was to model the dynamic failure properties of ligaments and their attachment sites to facilitate the development of more realistic dynamic finite element models of the human lower extremities for use in automotive collision simulations. Porcine medial collateral ligaments were chosen as a test model due to their similarities in size and geometry with human ligaments. Each porcine medial collateral ligament-bone complex (n = 12) was held in a custom test fixture placed in a drop tower to apply an axial impulsive impact load, applying strain rates ranging from 0.005 s-1 to 145 s-1. The data from the impact tests were analyzed using nonlinear regression to construct model equations for predicting the failure load of ligament-bone complexes subjected to specific strain rates as calculated from finite element knee, thigh, and hip impact simulations. The majority of the ligaments tested failed by tibial avulsion (75%) while the remaining ligaments failed via mid-substance tearing. The failure load ranged from 384 N to 1184 N and was found to increase with the applied strain rate and the product of ligament length and cross-sectional area. The findings of this study indicate the force required to rupture the porcine MCL increases with the applied bone-to-bone strain rate in the range expected from high speed frontal automotive collisions
Numerical simulation of mono-disperse droplet spray dryer under the influence of nozzle motion
With the increasing demand of uniform particles in the fields of medicine etc., the research on monodisperse droplet spray dryer (MDSD) becomes important. The drying efficiency of the current MDSD facility has to be improved to realize industrial applications. In this work, the influence of several kinds of nozzle movement on the drying process has been thoroughly explored by silico experiments. It is found that the velocity of the nozzle movement plays a key role in drying efficiency improvement. The movement of the nozzle leads to a wider distribution of the final moisture content of particles, and this effect becomes less significant with the increase of the velocity of nozzle motion. For all motion types under investigation, the circular motion is superior to the other motion types. It is revealed that the change of droplet dispersion state due to nozzle motion is the main factor that improves drying performance
A special irreducible matrix representation of the real Clifford algebra C(3,1)
4x4 Dirac (gamma) matrices (irreducible matrix representations of the
Clifford algebras C(3,1), C(1,3), C(4,0)) are an essential part of many
calculations in quantum physics. Although the final physical results do not
depend on the applied representation of the Dirac matrices (e.g. due to the
invariance of traces of products of Dirac matrices), the appropriate choice of
the representation used may facilitate the analysis. The present paper
introduces a particularly symmetric real representation of 4x4 Dirac matrices
(Majorana representation) which may prove useful in the future. As a byproduct,
a compact formula for (transformed) Pauli matrices is found. The consideration
is based on the role played by isoclinic 2-planes in the geometry of the real
Clifford algebra C(3,0) which provide an invariant geometric frame for it. It
can be generalized to larger Clifford algebras.Comment: 23 pages LaTeX, to appear in the J. Math. Phys. (v2: appendix B on
Pauli matrices and references are added, minor other changes
- …