Spectral irradiance of total and spectral energy standards

Spectral irradiance measurements of tungsten and carbon filament lamps for energy standards and accuracy limits used in space simulator

Prospectus for a Design Well in the Blessing Area Matagorda County, Texas

In recent years, the Bureau of Economic Geology has conducted regional subsurface studies of the Wilcox Group and Frio Formation of Texas as part of the U. S. Department of Energy's assessment of deep geopressured geothermal resources along the Gulf Coast. These studies resulted in two reports (Bebout and others, 1978; 1979) that describe several areas in Texas where temperatures are greater than 300°F and where the geology and reservoir conditions are suitable for resource testing by a design well. Throughout the Texas Coastal Plain, the 300°F isotherm generally occurs at depths ranging from 12,000 to 16,000 ft. The overlying geopressured sediments represent a substantial portion of the sedimentary column that contains significant quantities of entrained methane, making them a significant portion of the resource base (Gregory and others, 1980). The lower temperatures and pressures of these shallow geopressured sediments result in lower methane solubility, but drilling costs would be substantially lower, and perhaps reservoir quality would be better in comparison to the deep geopressured intervals. Although the latter condition has not been substantiated, several areas that are geologically favorable for testing shallow geopressured aquifers with temperatures less than 300°F were identified in a recently completed study (Weise and others, 1980) funded by the Gas Research Institute. The Blessing Prospect (fig. 1), one of the shallow prospects in Matagorda County, Texas, is presented in this prospectus as a candidate for the DOE design well program. The prospectus focuses on the geological and engineering aspects of the test site. Although legal and environmental considerations are mentioned, they have not been studied in detail and additional work would necessarily follow if the prospect is approved for drilling and testing. Likewise, a drilling program and an economic analysis would be necessary before final approval of a design well.Bureau of Economic Geolog

Who uses the fishery resources in South Africa’s largest impoundment? Characterising subsistence and recreational fishing sectors on Lake Gariep

The African Union’s prioritisation of inland fisheries as an investment area for poverty alleviation and regional economic development will require the development of management plans. These should be based on sound knowledge of the social dynamics of the resource users. In South Africa the social dynamics of resource users of inland fisheries have never been assessed. The purpose of this study was to assess the human dimensions of the anglers utilising the fishery in Lake Gariep, South Africa’s largest impoundment. The study was based on 357 first-time interviews conducted on the lakeshore between October 2006 and December 2007. Anglers were categorised as recreational (39%) or subsistence (61%) based on their residency, occupation, primary motivation for angling, mode of transport and gear use. Subsistence anglers were local (99%), residing within 10 km of the place where they were interviewed, while recreational anglers included both local resident and non-resident members. The racial composition of anglers was dependent on user group and differed significantly (p ≤ 0.05) from the demographic composition of the regional population. Recreational anglers were predominantly White (≥ 60% of interviews) and Coloured (≥ 25%), while 84% of subsistence anglers were Coloured and 16% Black African. Most recreational anglers had permanent employment or were pensioners while <30% of subsistence anglers were permanently employed. Most recreational users (82%) accessed the lake with their own vehicle while subsistence anglers mainly walked (63%) or used a bicycle (28%). Recreational interviewees either consumed (59%), sold (11%), gave away (10%) or released (20%) some of their catch. Subsistence anglers either ate their catch (53%) and/or sold (41%) their catch. Within the subsistence sector no anglers released fish after capture or gave some of the catch away. We conclude that this inland fishery contributes to the livelihood of the rural poor who use the lake on a subsistence basis and that recreational-angler based tourism may contribute to increased income and employment opportunities through related service industries

The View from the Top: CALIOP Ice Water Content in the Uppermost Layer of Tropical Cyclones

NASA's CALIPSO satellite carries both the Cloud and Aerosol Lidar with Orthogonal Polarization (CALIOP) and the Imaging Infrared Radiometer (IIR). The lidar is ideally suited to viewing the very top of tropical cyclones, and the IIR provides critical optical and microphysical information. The lidar and the IIR data work together to understand storm clouds since they are perfectly co-located, and big tropical cyclones provide an excellent complex target for comparing the observations. There is a lot of information from these case studies for understanding both the observations and the tropical cyclones, and we are just beginning to scratch the surface of what can be learned. Many tropical cyclone cloud particle measurements are focused on the middle and lower regions of storms, but characterization of cyclone interaction with the lowermost stratosphere at the upper storm boundary may be important for determining the total momentum and moisture transport budget, and perhaps for predicting storm intensity as well. A surprising amount of cloud ice is to be found at the very top of these big storms

Extinction-to-Backscatter Ratios of Saharan Dust Layers Derived from In-Situ Measurements and CALIPSO Overflights During NAMMA

We determine the aerosol extinction-to-backscatter (Sa) ratios of dust using airborne in-situ measurements of microphysical properties, and CALIPSO observations during the NASA African Monsoon Multidisciplinary Analyses (NAMMA). The NAMMA field experiment was conducted from Sal, Cape Verde during Aug-Sept 2006. Using CALIPSO measurements of the attenuated backscatter of lofted Saharan dust layers, we apply the transmittance technique to estimate dust Sa ratios at 532 nm and a 2-color method to determine the corresponding 1064 nm Sa. Using this method, we found dust Sa ratios of 39.8 plus or minus 1.4 sr and 51.8 plus or minus 3.6 sr at 532 nm and 1064 nm, respectively. Secondly, Sa ratios at both wavelengths is independently calculated using size distributions measured aboard the NASA DC-8 and estimates of Saharan dust complex refractive indices applied in a T-Matrix scheme. We found Sa ratios of 39.1 plus or minus 3.5 sr and 50.0 plus or minus 4 sr at 532 nm and 1064 nm, respectively, using the T-Matrix calculations applied to measured size spectra. Finally, in situ measurements of the total scattering (550 nm) and absorption coefficients (532 nm) are used to generate an extinction profile that is used to constrain the CALIPSO 532 nm extinction profile

Quantifying the Amount of Ice in Cold Tropical Cirrus Clouds

How much ice is there in the Tropical Tropopause layer, globally? How does one begin to answer that question? Clouds are currently the largest source of uncertainty in climate models, and the ice water content (IWC) of cold cirrus clouds is needed to understand the total water and radiation budgets of the upper troposphere and lower stratosphere (UT/LS). The Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite, originally a "pathfinder" mission only expected to last for three years, has now been operational for more than eight years. Lidar data from CALIPSO can provide information about how IWC is vertically distributed in the UT/LS, and about inter-annual variability and seasonal changes in cloud ice. However, cloud IWC is difficult to measure accurately with either remote or in situ instruments because IWC from cold cirrus clouds is derived from the particle cross-sectional area or visible extinction coefficient. Assumptions must be made about the relationship between the area, volume and density of ice particles with various crystal habits. Recently there have been numerous aircraft field campaigns providing detailed information about cirrus ice water content from cloud probes. This presentation evaluates the assumptions made when creating the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) global IWC data set, using recently reanalyzed aircraft particle probe measurements of very cold, thin TTL cirrus from the 2006 CR-AVE

Strategies for Improved CALIPSO Aerosol Optical Depth Estimates

In the spring of 2010, the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) project will be releasing version 3 of its level 2 data products. In this paper we describe several changes to the algorithms and code that yield substantial improvements in CALIPSO's retrieval of aerosol optical depths (AOD). Among these are a retooled cloud-clearing procedure and a new approach to determining the base altitudes of aerosol layers in the planetary boundary layer (PBL). The results derived from these modifications are illustrated using case studies prepared using a late beta version of the level 2 version 3 processing code

The NASA Decadal Survey Observing-System Study for Aerosols and Clouds,Convection, and Precipitation (ACCP)

No abstract availabl

Adapting CALIPSO Climate Measurements for Near Real Time Analyses and Forecasting

The Cloud-Aerosol Lidar and Infrared Pathfinder satellite Observations (CALIPSO) mission was originally conceived and designed as a climate measurements mission, with considerable latency between data acquisition and the release of the level 1 and level 2 data products. However, the unique nature of the CALIPSO lidar backscatter profiles quickly led to the qualitative use of CALIPSO?s near real time (i.e., ? expedited?) lidar data imagery in several different forecasting applications. To enable quantitative use of their near real time analyses, the CALIPSO project recently expanded their expedited data catalog to include all of the standard level 1 and level 2 lidar data products. Also included is a new cloud cleared level 1.5 profile product developed for use by operational forecast centers for verification of aerosol predictions. This paper describes the architecture and content of the CALIPSO expedited data products. The fidelity and accuracy of the expedited products are assessed via comparisons to the standard CALIPSO data products