Optimisation of the spark gap parameters for high powered ultrasound applications

There is considerable interest in the industrial and commercial applications of high power ultrasound (HPU) generated using pulsed power techniques. These applications include metal peening, the treatment of ores and minerals before extraction, drilling technologies and the comminution and recovery of waste materials. In all of these applications, it is important to optimise the parameters of the discharge causing the shock wave in the working medium to maximise the efficiency of the treatment. In a research project at the University of Strathclyde, some applications of HPU to the treatment of waste to assist in recycling have been investigated. Two systems have been considered, slag from the manufacture of stainless steel and bottle glass. With the slag material, it is intended to separate stainless steel from the silicate matrix to permit its recovery. With the bottle glass, the intention is comminution of the material to allow it to be recycled in a more valuable form. Measurements of the efficiency of these processes have been made in terms of the mass of material processed versus the energy input as the parameters of the discharge gap have been varied. In parallel with this work, measurements have been made using pinducer sensors to determine the energy in HPU pulses generated by discharges under identical conditions. Correlations are made between the efficiency of material treatment and the intensity of the HPU pulse measured in the far field. It is hoped that this approach will allow the optimal gap parameters to be determined using pinducer measurements rather than time consuming trials based around materials processing

Predicting field performance of five irrigated tree species using seedling quality assessment in Burkina Faso, West Africa

Five exotic tree species (Acacia angustissima (Mil.) Kuntze, Acacia mangium Wild, Gliricidia sepium (Jacq.) Alp., Leucaena hybrid (LxL), and Leucaena leucocephala (Lam.) de Wit) were investigated to determine whether parameters of nursery seedling stock quality could be used to predict their field performance in a plantation irrigated with treated waste-water to produce fodder and wood. Plants were grown in the nursery in two contrasting rooting substrates (ordinary nursery soil and sand), predicted to have different effects on resource allocation. Three categories of morphological indicators were measured, i.e. plant dimensions (height, diameter, root length), plant weights (shoot, root and whole plant weights) and indices (sturdiness quotient ‘SQ’, shoot:root dry weight ratio ‘SRR’ and Dickson’s quality index ‘DQI’). In the nursery, all species performed better in the ordinary nursery soil for all growth parameters except root length. Thus ordinary nursery substrate appeared superior to sand in terms of plant quality. However, a follow up at plantation phase revealed that only some morphological attributes or ratios were suitable to predict field performance for the five tested species in irrigated plantation. In addition, the effect of the substrate observed at the nursery stage had disappeared 12 months after out planting due to the availability of water and nutrients provided by the treated waste water used for the irrigation. The results showed that root collar diameter and DQI appeared to be the most appropriate indicators to predict the outplanting performance of the five tested species in a short-rotation irrigated plantation in semi-arid Burkina Faso. The former measure is simpler and non-destructive

Lentiviral manipulation of gene expression in human adult and embryonic stem cells

Human stem cells could revolutionize the field of medicine by providing a diverse range of cell types for tissue replacement therapies and drug discovery. To achieve this goal, genetic tools need to be optimized and developed for controlling and manipulating stem cells ex vivo. Here we describe a lentiviral delivery system capable of high infection rates in human mesenchymal and embryonic stem cells. The lentiviral backbone was modified to express mono- and bi-cistronic transgenes and was also used to deliver short hairpin ribonucleic acid for specific silencing of gene expression in human stem cells. We show that lentiviral transduction can be used to alter gene expression without altering the genes' ability to differentiate in vitro. These vectors will enable rapid analysis of gene function in stem cells and permit the generation of knock-in / knock-out models of human disease in the rapidly developing field of gene therapy

Surface flashover of oil-immersed dielectric materials in uniform and non-uniform fields

The applied electrical fields required to initiate surface flashover of different types of dielectric material immersed in insulating oil have been investigated, by applying impulses of increasing peak voltage until surface flashover occurred. The behavior of the materials in repeatedly over-volted gaps was also analyzed in terms of breakdown mode (some bulk sample breakdown behaviour was witnessed in this regime), time to breakdown, and breakdown voltage. Cylindrical samples of polypropylene, low-density polyethylene, ultra-high molecular weight polyethylene, and Rexolite, were held between two electrodes immersed in insulating oil, and subjected to average applied electrical fields up to 870 kV/cm. Tests were performed in both uniform- and non-uniform-fields, and with different sample topologies. In applied field measurements, polypropylene required the highest levels of average applied field to initiate flashover in all electrode configurations tested, settling at similar to 600 kV/cm in uniform fields, and similar to 325 kV/cm in non-uniform fields. In over-volted point-plane gaps, ultra-high molecular weight polyethylene exhibited the longest pre-breakdown delay times. The results will provide comparative data for system designers for the appropriate choice of dielectric materials to act as insulators for high-voltage, pulsed-power machines

The suitability of N2 to replace SF6 in a triggered spark-gap switch for pulsed power applications

The high dielectric strength of sulphur hexafluoride (SF6) when compared with other gases, coupled with safety benefits such as non-flammability and non-toxicity, has seen the widespread use of SF6 for the insulation of switching components. However, SF6 is now widely recognised as a highly damaging greenhouse gas, and investigations of the switching properties of alternative gases to replace SF6 within the bounds of existing system topologies are required. In the present paper, a comparative study has been carried out on a triggered spark-gap of type presently deployed in industrial pulsed-power machines, to determine the suitability of nitrogen (N2) to replace SF6 as the switching medium, without compromising on functionality. Experiments were performed with fast-rising trigger pulses to minimise the delay time to breakdown and jitter, and three distinct operational regimes have been identified for both gases as the pressure inside the switch is increased. The static breakdown characteristics and upper pressure boundaries of operation have been determined for both gases at a range of dc charging voltages. Measurements of the time to breakdown have shown jitters as low as 1.3 ns when operating in N2, highlighting the potential of N2 to replace SF6 without the need for re-design or replacement of the presently used switch

Thermal Field Theory and Generalized Light Front Coordinates

The dependence of thermal field theory on the surface of quantization and on the velocity of the heat bath is investigated by working in general coordinates that are arbitrary linear combinations of the Minkowski coordinates. In the general coordinates the metric tensor $g_{\bar{\mu\nu}}$ is non-diagonal. The Kubo, Martin, Schwinger condition requires periodicity in thermal correlation functions when the temporal variable changes by an amount $-i\big/(T\sqrt{g_{\bar{00}}})$. Light front quantization fails since $g_{\bar{00}}=0$, however various related quantizations are possible.Comment: 10 page

Expression of connexins in human preimplantation embryos in vitro

Intercellular communication via gap junctions is required to coordinate developmental processes in the mammalian embryo. We have investigated if the connexin (Cx) isoforms known to form gap junctions in rodent preimplantation embryos are also expressed in human embryos, with the aim of identifying species differences in communication patterns in early development. Using a combination of polyA PCR and immunocytochemistry we have assessed the expression of Cx26, Cx31, Cx32, Cx40, Cx43 and Cx45 which are thought to be important in early rodent embryos. The results demonstrate that Cx31 and Cx43 are the main connexin isoforms expressed in human preimplantation embryos and that these isoforms are co-expressed in the blastocyst. Cx45 protein is expressed in the blastocyst but the protein may be translated from a generally low level of transcripts: which could only be detected in the PN to 4-cell embryos. Interestingly, Cx40, which is expressed by the extravillous trophoblast in the early human placenta, was not found to be expressed in the blastocyst trophectoderm from which this tissue develops. All of the connexin isoforms in human preimplantation embryos are also found in rodents pointing to a common regulation of these connexins in development of rodent and human early embryos and perhaps other species