26 research outputs found
Torsional suspension system for testing space structures
A low frequency torsional suspension system for testing a space structure uses a plurality of suspension stations attached to the space structure along the length thereof in order to suspend the space structure from an overhead support. Each suspension station includes a disk pivotally mounted to the overhead support, and two cables which have upper ends connected to the disk and lower ends connected to the space structure. The two cables define a parallelogram with the center of gravity of the space structure being vertically beneath the pivot axis of the disk. The vertical distance between the points of attachment of the cables to the disk and the pivot axis of the disk is adjusted to lower the frequency of the suspension system to a level which does not interfere with frequency levels of the space structure, thereby enabling accurate measurement
An analysis of the effect of a curved ramp on the take-off performance of catapult-launched airplanes
An analytical study of the effect of airplane wake on the lateral dispersion of aerial sprays
Calculations are made to determine the trajectories of liquid droplets introduced into the air disturbances generated by an airplane engaged in aerial spraying. The effects of such factors as the positions at which droplets are ejected into the disturbances, airplane lift coefficient, and altitude are investigated. The distribution of deposit on the ground is computed for several droplet-size spectra, variations in the rate at which mass is ejected along the span, and lateral flight-path spacings. Consideration is then given to the problem of adjusting these factors with the aim of improving the uniformity and increasing the effective width of the deposit. The results indicate that the lateral dispersion of droplets is increased when the spanwise position at which particles are ejected is moved toward the wing tip. Greater dispersion also results when the airplane lift coefficient or altitude is increased
Suspension systems for ground testing large space structures
A research program is documented for the development of improved suspension techniques for ground vibration testing of large, flexible space structures. The suspension system must support the weight of the structure and simultaneously allow simulation of the unconstrained rigid-body movement as in the space environment. Exploratory analytical and experimental studies were conducted for suspension systems designed to provide minimum vertical, horizontal, and rotational degrees of freedom. The effects of active feedback control added to the passive system were also investigated. An experimental suspension apparatus was designed, fabricated, and tested. This test apparatus included a zero spring rate mechanism (ZSRM) designed to support a range of weights from 50 to 300 lbs and provide vertical suspension mode frequencies less than 0.1 Hz. The lateral suspension consisted of a pendulum suspended from a moving cart (linear bearing) which served to increase the effective length of the pendulum. The torsion suspension concept involved dual pendulum cables attached from above to a pivoting support (bicycle wheel). A simple test structure having variable weight and stiffness characteristics was used to simulate the vibration characteristics of a large space structure. The suspension hardware for the individual degrees of freedom was analyzed and tested separately and then combined to achieve a 3 degree of freedom suspension system. Results from the exploratory studies should provide useful guidelines for the development of future suspension systems for ground vibration testing of large space structures
A Preliminary Flight Investigation of the Effects of Vortex Generators on Separation Due to Shock
An Analytical Treatment of Aircraft Propeller Precession Instability
An analytical investigation is made of a precession-type instability which can occur in a flexibly supported aircraft-engine-propeller combination. By means of an idealized mathematical model which is comprised of a rigid power-plant system flexibly mounted in pitch and yaw to a fixed backup structure, the conditions required for neutral stability are determined. The paper also examines the sensitivity of the stability boundaries to changes in such parameters as stiffness, damping, and asymmetries in the engine mount, propeller speed, airspeed, Mach number, propeller thrust, and location of pitch and yaw axes. Stability is found to depend strongly on the damping and stiffness in the system. With the use of nondimensional charts, theoretical stability boundaries are compared with experimental results obtained in wind-tunnel tests of an aeroelastic airplane model. In general, the theoretical results, which do not account for wing response, show the same trends as observed experimentally; however, for a given set of conditions calculated airspeeds for neutral stability are consistently lower than the measured values. Evidently, this result is due to the fact that wing response tends to add damping to the system
Quasi-classical trajectories study of Ne2Br2(B) vibrational predissociation: Kinetics and product distributions
The vibrational predissociation of the Ne2Br2(B) van der Waals complex has
been investigated using the quasi-classical trajectory method (QCT), in the
range of vibrational levels v' = 16-23. Extensive comparison is made with the
most recent experimental observations [Pio et al., J. Chem. Phys. 133, 014305
(2010)], molecular dynamics with quantum transitions (MDQT) simulations [Miguel
et al., Faraday Discuss. 118, 257 (2001)], and preliminary results from
24-dimensional Cartesian coupled coherent state (CCCS) calculations. A
sequential mechanism is found to accurately describe the theoretical dynamical
evolution of intermediate and final product populations, and both QCT and CCCS
provide very good estimates for the dissociation lifetimes. The capabilities of
QCT in the description of the fragmentation kinetics is analyzed in detail by
using reduced-dimensionality models of the complexes and concepts from
phase-space transport theory. The problem of fast decoupling of the different
coherent states in CCCS simulations, resulting from the high dimensionality of
phase space, is tackled using a re-expansion scheme. QCT ro-vibrational product
state distributions are reported. Due to the weakness of the vdW couplings and
the low density of vibrational states, QCT predicts a larger than observed
propensity for \Delta v' = -1 and -2 channels for the respective dissociation
of the first and second Ne atoms.Comment: 16 pages, 6 figures, 4 tables. Accepted for publication in J. Chem.
Phy
The contribution of rapid visual and auditory processing to the reading of irregular words and pseudowords presented singly and in contiguity
Recommended from our members
NACA Technical Reports
From the Introduction: "In the present reports the paths of liquid spray droplets issued in the flow field behind an airplane are calculated.
Recommended from our members
NACA Research Memorandums
From Summary: "Results of flight-path computations are presented for launchings from a straight deck and the curved ramp under conditions of insufficient lift at the instant of take-off.