23 research outputs found
Recommended from our members
Disposal of NORM-Contaminated Oil Field Wastes in Salt Caverns
In 1995, the U.S. Department of Energy (DOE), Office of Fossil Energy, asked Argonne National Laboratory (Argonne) to conduct a preliminary technical and legal evaluation of disposing of nonhazardous oil field waste (NOW) into salt caverns. That study concluded that disposal of NOW into salt caverns is feasible and legal. If caverns are sited and designed well, operated carefully, closed properly, and monitored routinely, they can be a suitable means of disposing of NOW (Veil et al. 1996). Considering these findings and the increased U.S. interest in using salt caverns for NOW disposal, the Office of Fossil Energy asked Argonne to conduct further research on the cost of cavern disposal compared with the cost of more traditional NOW disposal methods and on preliminary identification and investigation of the risks associated with such disposal. The cost study (Veil 1997) found that disposal costs at the four permitted disposal caverns in the United States were comparable to or lower than the costs of other disposal facilities in the same geographic area. The risk study (Tomasko et al. 1997) estimated that both cancer and noncancer human health risks from drinking water that had been contaminated by releases of cavern contents were significantly lower than the accepted risk thresholds. Since 1992, DOE has funded Argonne to conduct a series of studies evaluating issues related to management and disposal of oil field wastes contaminated with naturally occurring radioactive material (NORM). Included among these studies were radiological dose assessments of several different NORM disposal options (Smith et al. 1996). In 1997, DOE asked Argonne to conduct additional analyses on waste disposal in salt caverns, except that this time the wastes to be evaluated would be those types of oil field wastes that are contaminated by NORM. This report describes these analyses. Throughout the remainder of this report, the term ''NORM waste'' is used to mean ''oil field waste contaminated by NORM''
Bounding of Flow and Transport Analysis in Heterogeneous Saturated Porous Media: A Minimum Energy Dissipation Principle for the Bounding and Scale-Up
We apply minimum kinetic energy principles from classic mechanics to heterogeneous porous media flow equations to derive and evaluate rotational flow components to determine bounding homogenous representations. Kelvin characterized irrotational motions in terms of energy dissipation and showed that minimum dynamic energy dissipation occurs if the motion is irrotational; i.e., a homogeneous flow system. For porous media flow, reductions in rotational flow represent heterogeneity reductions. At the limit, a homogeneous system, flow is irrotational. Using these principles, we can find a homogenous system that bounds a more complex heterogeneous system. We present mathematics for using the minimum energy principle to describe flow in heterogeneous porous media along with reduced special cases with the necessary bounding and associated scale-up equations. The first, simple derivation involves no boundary differences and gives results based on direct Kelvin-type minimum energy principles. It provides bounding criteria, but yields only a single ultimate scale-up. We present an extended derivation that considers differing boundaries, which may occur between scale-up elements. This approach enables a piecewise less heterogeneous representation to bound the more heterogeneous system. It provides scale-up flexibility for individual model elements with differing sizes, and shapes and supports a more accurate representation of material properties. We include a case study to illustrate bounding with a single direct scale-up. The case study demonstrates rigorous bounding and provides insight on using bounding flow to help understand heterogeneous systems. This work provides a theoretical basis for developing bounding models of flow systems. This provides a means to justify bounding conditions and results
An Empirical Mode-Spatial Model for Environmental Data Imputation
Complete and accurate data are necessary for analyzing and understanding trends in time-series datasets; however, many of the available time-series datasets have gaps that affect the analysis, especially in the earth sciences. As most available data have missing values, researchers use various interpolation methods or ad hoc approaches to data imputation. Since the analysis based on inaccurate data can lead to inaccurate conclusions, more accurate data imputation methods can provide accurate analysis. We present a spatial-temporal data imputation method using Empirical Mode Decomposition (EMD) based on spatial correlations. We call this method EMD-spatial data imputation or EMD-SDI. Though this method is applicable to other time-series data sets, here we demonstrate the method using temperature data. The EMD algorithm decomposes data into periodic components called intrinsic mode functions (IMF) and exactly reconstructs the original signal by summing these IMFs. EMD-SDI initially decomposes the data from the target station and other stations in the region into IMFs. EMD-SDI evaluates each IMF from the target station in turn and selects the IMF from other stations in the region with periodic behavior most correlated to target IMF. EMD-SDI then replaces a section of missing data in the target station IMF with the section from the most closely correlated IMF from the regional stations. We found that EMD-SDI selects the IMFs used for reconstruction from different stations throughout the region, not necessarily the station closest in the geographic sense. EMD-SDI accurately filled data gaps from 3 months to 5 years in length in our tests and favorably compares to a simple temporal method. EMD-SDI leverages regional correlation and the fact that different stations can be subject to different periodic behaviors. In addition to data imputation, the EMD-SDI method provides IMFs that can be used to better understand regional correlations and processes
Phosphorus Distribution in Delta Sediments: A Unique Data Set from Deer Creek Reservoir
Recently, Deer Creek Reservoir (DCR) underwent a large drawdown to support dam reconstruction. This event exposed sediments inundated by the reservoir, since dam completion in the early 1940s. This event allowed us to take sediment data samples and evaluate them for phosphorous (P) content. It is difficult for normal reservoir sediment studies to have sediment samples at high spatial resolution because of access. During the drawdown, we collected 91 samples on a grid 100 m in one direction and 200 m in the other. This grid defined an area of approximately 750,000 m2 (185 acre). We took both surface samples, and at some sites, vertical samples. We determined water soluble P for all the samples, and P in four other reservoirs or fractions for 19 samples. Results showed water soluble P in the range of 2.28 × 10−3 to 9.81 × 10−3, KCl-P from 2.53 × 10−3 to 1.10 × 10−2, NaOH-P from 5.30 × 10−2 to 4.60 × 10−1, HCl-P from 1.28 × 10−1 to 1.34, and residual (mostly organic) P from 8.23 × 10−1 to 3.23 mg/g. We provide this data set to the community to support and encourage research in this area. We hope this data set will be used and analyzed to support other research efforts
Characterizing Total Phosphorus in Current and Geologic Utah Lake Sediments: Implications for Water Quality Management Issues
Utah Lake is highly eutrophic with large phosphorous inflows and a large internal phosphorous reservoir in the sediment. There are debates over whether this phosphorous is from geologic or more recent anthropologic sources. This study characterizes total phosphorous in geologic and current lake sediments to attempt to address that question. The average total phosphorous concentrations in the lake sediment were 666 ppm, with most samples in the 600 to 800 ppm range with a few larger values. Concentrations in historic geologic sediments were not statistically different from lake sediments. A spatial analysis showed that phosphorous distributions appeared continuous from the lake to the shore and that high and low values could be attributed to areas of seeps and springs (low) or feed lots and waste water discharge (high). These results indicate that geologic sediments without anthropogenic impacts are not statistically different than current lake sediments. The high values indicate that internal natural phosphorous loadings could be significant and the impaired state may be relatively insensitive to external anthropogenic loadings. If this is the case, then mitigation efforts to address anthropogenic sources may have minimal impacts. This case study presents an impaired water body where non-anthropogenic nutrient sources are significant and shows that reservoir management decisions should consider these non-anthropogenic phosphorous sources relative to anthropogenic sources. This study can serve as a template for evaluating the importance of geologic phosphorous sources for management decisions
Measuring and Calculating Current Atmospheric Phosphorous and Nitrogen Loadings to Utah Lake Using Field Samples and Geostatistical Analysis
Atmospheric nutrient loading through wet and dry deposition is one of the least understood, yet can be one of the most important, pathways of nutrient transport into lakes and reservoirs. Nutrients, specifically phosphorus and nitrogen, are essential for aquatic life but in excess can cause accelerated algae growth and eutrophication and can be a major factor that causes harmful algal blooms (HABs) that occur in lakes and reservoirs. Utah Lake is subject to eutrophication and HABs. It is susceptible to atmospheric deposition due to its large surface area to volume ratio, high phosphorous levels in local soils, and proximity to Great Basin dust sources. In this study we collected and analyzed eight months of atmospheric deposition data from five locations near Utah Lake. Our data showed that atmospheric deposition to Utah Lake over the 8-month period was between 8 to 350 Mg (metric tonne) of total phosphorus and 46 to 460 Mg of dissolved inorganic nitrogen. This large range is based on which samples were used in the estimate with the larger numbers including results from “contaminated samples”. These nutrient loading values are significant for Utah Lake in that it has been estimated that only about 17 Mg year−1 of phosphorus and about 200 Mg year−1 of nitrogen are needed to support a eutrophic level of algal growth. We found that atmospheric deposition is a major contributor to the eutrophic nutrient load of Utah Lake
Insights into Efficient Irrigation of Urban Landscapes: Analysis Using Remote Sensing, Parcel Data, Water Use, and Tiered Rates
To understand how landscape irrigation can be better managed, we selected two urban irrigation systems in northern Utah, USA, and performed a statistical analysis of relationships among water use, irrigated area, plant health (based on the Normalized Difference Vegetation Index), and water rate structures across thousands of parcels. Our approach combined remote sensing with 4-band imagery and on-site measurements from water meters. We present five key findings that can lead to more efficient irrigation practices. First, tiered water rates result in less water use when compared to flat water rates for comparable plant health. Second, plant health does not strictly increase with water application but has an optimum point beyond which further watering is not beneficial. Third, many water users irrigate beyond this optimum point, suggesting that there is water conservation potential without loss of aesthetics. Fourth, irrigation is not the only contributor to plant health, and other factors need more attention in research and in water conservation programs. Fifth, smaller irrigated areas correlate with higher water application rates, an observation that may inform future land use decisions. These findings are especially pertinent in responding to the current drought in the western United States