Advancements in Root Growth Measurement Technologies and Observation Capabilities for Container-Grown Plants

The study, characterization, observation, and quantification of plant root growth and root systems (Rhizometrics) has been and remains an important area of research in all disciplines of plant science. In the horticultural industry, a large portion of the crops grown annually are grown in pot culture. Root growth is a critical component in overall plant performance during production in containers, and therefore it is important to understand the factors that influence and/or possible enhance it. Quantifying root growth has varied over the last several decades with each method of quantification changing in its reliability of measurement and variation among the results. Methods such as root drawings, pin boards, rhizotrons, and minirhizotrons initiated the aptitude to measure roots with field crops, and have been expanded to container-grown plants. However, many of the published research methods are monotonous and time-consuming. More recently, computer programs have increased in use as technology advances and measuring characteristics of root growth becomes easier. These programs are instrumental in analyzing various root growth characteristics, from root diameter and length of individual roots to branching angle and topological depth of the root architecture. This review delves into the expanding technologies involved with expertly measuring root growth of plants in containers, and the advantages and disadvantages that remain

The use of coir for reducing risks of substrates hydrophobicity.

International audienc

The Use of Wood Fiber for Reducing Risks of Hydrophobicity in Peat-Based Substrates

International audiencePeat substrates are well known to become hydrophobic during desiccation, thus degradingtheir water retention properties. Synthetic wetting agents are commonly incorporated to limit the riskof hydrophobicity, but substrates companies are searching for more sustainable alternatives. To thatend, the effect of wood fiber addition in peat-based mixes was measured using contact angles andhydration curves. The study was carried out on two raw materials (white milled peat and wood fiber)and binary mixes. The results showed a shift from hydrophilic to more hydrophobic character with adecrease in the ability to rewet of peat-based substrates in relation to the intensity of drying, whereaswood fiber remained hydrophilic. Increasing wood fiber content in peat-based mixes improvedthe rehydration efficiency, but with a lower intensity of that measured with synthetic wettingagent addition. Our results highlighted the hydrophilic nature of wood fiber and demonstrated anadditional benefit of wood fiber use in peat-based growing media

The Use of Wood Fiber for Reducing Risks of Hydrophobicity in Peat-Based Substrates

Peat substrates are well known to become hydrophobic during desiccation, thus degrading their water retention properties. Synthetic wetting agents are commonly incorporated to limit the risk of hydrophobicity, but substrates companies are searching for more sustainable alternatives. To that end, the effect of wood fiber addition in peat-based mixes was measured using contact angles and hydration curves. The study was carried out on two raw materials (white milled peat and wood fiber) and binary mixes. The results showed a shift from hydrophilic to more hydrophobic character with a decrease in the ability to rewet of peat-based substrates in relation to the intensity of drying, whereas wood fiber remained hydrophilic. Increasing wood fiber content in peat-based mixes improved the rehydration efficiency, but with a lower intensity of that measured with synthetic wetting agent addition. Our results highlighted the hydrophilic nature of wood fiber and demonstrated an additional benefit of wood fiber use in peat-based growing media

Quantitative Description and Classification of Growing Media Particle Morphology through Dynamic Image Analysis

The physical properties of growing media are dependent on the morphological characteristics of the particles composing them. Thus, their characteristics can be more precisely altered for specific purposes by a better morphological design of materials to optimize the use of raw materials and increase water efficiency. There are many references on the relationship between basic particle size and physical properties, but the arrangement of the particles and the resulting physical properties are also affected by the shape of the particles. Growing media have seldom been characterized by shape criteria and, therefore, their influence remains unknown. A dynamic image analyzer, the QicPic device, was used to assess particle shape and size for a wide diversity of growing media constituents. As well as FeretMAX and ChordMIN diameters describing individual particle length and width, respectively, individual particle shape was analyzed in terms of several descriptors (aspect ratio, circularity, roundness, and convexity). A classification was established to discern different particle shapes and all materials were described accordingly. Correlations between particle morphology descriptors were reported, showing that the greater the particle length, the smaller the width/length ratio, circularity, roundness, and convexity. Circularity, roundness, particle length, and its associated relative span were identified as the most relevant parameters describing materials’ morphology. This work shows a large diversity in particle morphology of growing media constituents, which were categorized into four classes of materials. Three classes were mainly described according to their particle shapes, with a decreasing elongation and an increasing circularity, roundness, and convexity: (1) fine and coarse wood and coir fibers; (2) all Sphagnum white peats, milled or sod; and (3) black peats, sedge peat, coir pith, fresh and composted pine bark, green waste compost, and perlite. A fourth class was represented by coir medium (mixing pith and fibers) and was above all characterized by high diversity in particle length. These findings extend the characterization of the materials for a more thorough evaluation of the links between particle morphology and physical properties

Measuring Root Hydraulic Parameters of Container-grown Herbaceous and Woody Plants Using the Hydraulic Conductance Flow Meter

International audienceRoot hydraulic conductance and conductivity are physiological traits describing the ease with which water can move through the belowground vascular system of a plant, and are used as indicators of plant performance and adaptability to a given environment. The ability to measure hydraulic conductance of container-grown herbaceous and semiwoody plants with soft conductive tissue was tested using a hydraulic conductance flow meter (HCFM). Although the HCFM is a hydraulic apparatus that has been used on woody plants to measure hydraulic conductance of intact roots, it has never been reportedly used on container-grown horticultural plants. Two herbaceous species, Chrysanthemum L. and Solenstemon scutellarioides Thonn., were grown in containers and hydraulic parameters were measured, including root conductance and root conductivity, as well as physical traits such as stem diameter and dry root mass. The HCFM was easily connected to intact roots even on herbaceous stems and was used to determine hydraulic conductance and conductivity directly on container-grown plants with minimal disturbance on the root system. Chrysanthemums, Buddleja davidii Franch., and Hibiscus moscheutos L. were grown in three different substrates, and both root mass and root hydraulic parameters were determined. Chrysanthemums showed a positive response with increasing root hydraulic conductance with increasing root mass. The substrates used in these studies only had an effect on root biomass of chrysanthemums, but substrates had no differential effect on root hydraulic conductivity

Exploring Substrate Water Capture in Common Greenhouse Substrates through Preconditioning and Irrigation Pulsing Techniques

Particles in a substrate create a network of pore pathways for water to move through, with size and shape determining the efficacy of these channels. Reduced particle size diversity can lead to increased leachate, poor substrate hydration, and an inefficient irrigation practice. This research examined the hydration characteristics of three greenhouse substrate components at three preconditioned initial moisture contents using subirrigation under five different irrigation durations and three water depths (2 mm, 20 mm, and 35 mm). Sphagnum peatmoss, coconut coir, and aged pine bark were tested at 67%, 50%, and 33% initial moisture (by weight). The objectives were to determine the impact of varying irrigation event durations (5, 10, 20, 30, 60 min) over a 60-min period, and the further influence of water depth and initial moisture, on the water capture abilities of peat, coir, and pine bark. The number of irrigation events depended on the irrigation event time of that experimental unit divided by the total time of 60 min, varying from 12, 6, 3, 2, and 1 event. Hydration efficiency was influenced by initial moisture content (IMC), water depth, pulsing duration, and inherent substrate characteristics (hydrophobicity/hydrophilicity). Initial MC had the largest impact on peat, regardless of water level or irrigation duration. Lower IMCs increased the hydrophobic response of peat, further reducing the amount of water the substrate was able to absorb. Pine bark had a 5–10% decrease in initial hydration between 67%, 50%, and 33% IMC, while coir’s hydrophilic nature reduced any IMC affects. At 50% IMC or less, coir had the highest volumetric water content (VWC) across all substrates, pulsing durations, and water depths. Water depth was found to increase initial hydration and final hydration 6–8% across all substrates. These three materials had altered and varied water capture responses depending on the combination of treatments employed. This work demonstrated the effects of intensity and exposure on substrates and the need for more integrated research for improving water use efficiency on container crops