Detection of cosmic ray tracks using scintillating fibers and position sensitive multi-anode photomultipliers

This experiment demonstrates detection of cosmic ray tracks by using Scintillating fiber planes and multi-anode photomultipliers (MA-PMTs). In a laboratory like this, cosmic rays provide a natural source of high-energy charged particles which can be detected with high efficiency and with nanosecond time resolution

Fermilab Main Injector Beam Position Monitor Upgrade

An upgrade of the Beam Position Monitor (BPM) signal processing and data acquisition system for the Fermilab Main Injector is described. The Main Injector is a fast cycling synchrotron that accelerates protons or antiprotons from 8 to 150 GeV. Each Main Injector cycle can have a totally different magnet ramp, RF frequency configuration, beam bunch structure, and injection/extraction pattern from the previous cycle. The new BPM system provides the capabilities and flexibility required by the dynamic and complex machine operations. The system offers measurement capability in the 2.5 MHz and 53 MHz channels to detect the range of bunch structures for protons and antiprotons in both wideband (turn-by-turn) and narrowband (closed-orbit) modes. The new BPM read-out system is based on the digital receiver concept and is highly configurable, allowing the signal processing of nearly all Main Injector beam conditions, including the detection of individual batches. An overview of the BPM system in the Main Injector operating environment, some technology details and first beam measurements are presented

PAN-DA and beyond: Data acquisition for the next generation experiments

We report on the status of the PAN-DA data acquisition system presented at the last Real Time Conference. Since that time, PAN-DA has been successfully used in the fixed target program at Fermilab. We also report on the plans and strategies for development of a new data acquisition system for the next generation of fixed target experiments at Fermilab. 10 refs., 3 figs

First measurement of muon-neutrino disappearance in NOvA

This paper reports the first measurement using the NOvA detectors of νμ disappearance in a νμ beam. The analysis uses a 14 kton-equivalent exposure of 2.74×1020 protons-on-target from the Fermilab NuMI beam. Assuming the normal neutrino mass hierarchy, we measure Δm232=(2.52+0.20−0.18)×10−3  eV2 and sin2θ23 in the range 0.38–0.65, both at the 68% confidence level, with two statistically degenerate best-fit points at sin2θ23=0.43 and 0.60. Results for the inverted mass hierarchy are also presented

First measurement of electron neutrino appearance in NOvA

We report results from the first search for νμ→νe transitions by the NOvA experiment. In an exposure equivalent to 2.74×1020 protons on target in the upgraded NuMI beam at Fermilab, we observe 6 events in the Far Detector, compared to a background expectation of 0.99±0.11(syst) events based on the Near Detector measurement. A secondary analysis observes 11 events with a background of 1.07±0.14(syst). The 3.3σ excess of events observed in the primary analysis disfavors 0.1π<δCP<0.5π in the inverted mass hierarchy at the 90% C.L

Integrated FASTBUS, VME and CAMAC diagnostic software at Fermilab

A fully integrated system for the diagnosis and repair of data acquisition hardware in FASTBUS, VME and CAMAC is described. A short cost/benefit analysis of using a distributed network of personal computers for diagnosis is presented. The SPUDS (Single Platform Uniting Diagnostic Software) software package developed at Fermilab by the authors is introduced. Examples of how SPUDS is currently used in the Fermilab equipment repair facility, as an evaluation tool and for field diagnostics are given

Integrated FASTBUS, VME and CAMAC diagnostic software at Fermilab

A fully integrated system for the diagnosis and repair of data acquisition hardware in FASTBUS, VME and CAMAC is described. A short cost/benefit analysis of using a distributed network of personal computers for diagnosis is presented. The SPUDS (Single Platform Uniting Diagnostic Software) software package developed at Fermilab by the authors is introduced. Examples of how SPUDS is currently used in the Fermilab equipment repair facility, as an evaluation tool and for field diagnostics are given

Low-latency NuMI trigger for the CHIPS-5 neutrino detector

The CHIPS R&D Project aims to develop affordable large-scale water Cherenkov neutrino detectors for underwater deployment. In 2019, a 5kt prototype detector CHIPS-5 was deployed in northern Minnesota to potentially study neutrinos generated by the NuMI beam. This paper presents the dedicated low-latency triggering system for CHIPS-5 that delivers notifications of neutrino spills from the Fermilab accelerator complex to the detector with sub-nanosecond precision. Building on existing NOνA infrastructure, the time distribution system achieves this using only open-source software and conventional computing and network elements. In a time-of-flight study, the system reliably provided advance notifications 610±330ms prior to neutrino spills at 96% efficiency. This permits advanced analysis in real-time as well as hardware-assisted triggering that saves data bandwidth and reduces DAQ computing load outside time windows of interest

CAPTURE CAVITY II RESULTS AT FNAL*

Abstract As part of the research and development towards the International Linear Collider (ILC), several test facilities have been developed at Fermilab. This paper presents the latest Low Level RF (LLRF) results obtained with Capture Cavity II (CCII) at the ILC Test Accelerator (ILCTA) test facility. The main focus will be on controls and RF operations using the SIMCON based LLRF system developed in DES