A prototype ASIC for APD array readout of scintillating plastic fibers

We report on the development of custom front-end electronics for use with avalanche photodiode (APD) arrays as part of a NASA technology study for the readout of scintillating plastic fibers. APD arrays featuring 64 1 mm square pixels are used. We demonstrate that a pixel of these APD arrays coupled to relatively thin (0.25 mm) and short (15 cm) scintillating plastic fibers can be used to detect and measure the tracks of even minimum ionizing particles (MIPs). An applicationspecific integrated circuit (ASIC) implementation of the electronics is required to produce a detector sufficiently compact for practical use in a flight experiment featuring many thousands of channels. This paper briefly describes the detector concept and performance and presents the design and performance of a four-channel prototype ASIC fabricated using the 0.35 micron TSMC process

Alterations in DRH and DRL performance in rats developmentally exposed to an environmental PCB mixture

Schedule-controlled responding was examined in offspring of rats exposed to a PCB mixture formulated to mimic the PCB congener profile in fish from the Fox River in Green Bay, WI. Female rats were administered 0, 1, 3, or 6 mg/kg/day of the PCB mixture beginning four weeks prior to breeding until weaning on postnatal day 21. When offspring were approximately 235 days old, they were tested on three different schedules of a differential reinforcement of high rate (DRH) operant task (DRH 2:1, DRH 4:2, and DRH 8:4). DRH testing was followed by testing on the differential reinforcement of low rate (DRL) operant task in which rats had to inhibit responding until 15 s had elapsed (DRL 15) from the previous response in order to obtain a food reinforcer. After completion of DRL 15 testing, 3 days of extinction testing were conducted (DRL EXT) during which no reinforcers were delivered. Developmental exposure to the higher PCB doses resulted in shorter inter-response times (IRTs) and shorter response durations during DRH 8:4, which translated into a greater percentage of reinforced trials. For DRL 15, no significant exposure-related effects were observed on the number of responses or reinforcers earned, or the number or proportion of responses with long or short inter-response times during acquisition or steady state performance. However, during DRL EXT, rats developmentally exposed to the highest PCB dose responded more than controls, produced significantly more short IRT responses, and had a significantly lower proportion of long IRT responses. Overall, exposure to this PCB mixture resulted in increased responding which was suggestive of a deficit in inhibitory control. © 2006 Elsevier Inc. All rights reserved

Readout of scintillating plastic fibers with an APD array and prototype ASIC

We report on the development of custom front-end electronics for use with avalanche photodiode (APD) arrays as part of a NASA technology study for the readout of scintillating plastic fibers. APD arrays featuring 64 1 mm square pixels are used. We demonstrate that a pixel of these APD arrays coupled to relatively thin (0.25 mm) and short (15 cm) scintillating plastic fibers can be used to detect and measure the tracks of even minimum ionizing particles. An application-specific integrated circuit (ASIC) implementation of the electronics is required to produce a detector sufficiently compact for practical use in a space flight experiment featuring many thousands of channels. This paper briefly describes the detector concept and performance and presents the design and performance of a four-channel prototype ASIC fabricated using the 0.35 /spl mu/ Taiwan Semiconductor Manufacturing Company (TSMC) process

Formulation and Characterization of an experimental PCB mixture designed to mimic human exposure from contaminated fish

Each environmental exposure matrix contains a unique mixture of PCB congeners. Since several congener types have multiple and distinct biological actions, it is important to characterize congener profiles in exposure sources. The Fox River Environment and Diet Study (FRIENDS) is assessing the human health effects of consumption of PCB-contaminated fish from the Fox River in northeastern Wisconsin. Concurrent laboratory studies required the formulation of a dosing solution which closely mimicked the human PCB exposure from fish. PCB congener profiles from Fox River walleye were compared to profiles for various theoretical mixtures having different relative percentages of Aroclors by weight. The theoretical mixture which provided the best approximation of the Fox River fish PCB profile contained 35% 1242, 35% 1248, 15% 1254, and 15% 1260. A PCB mixture was formulated to match this theoretical construct, and the congener profile for the mixture of Aroclors was determined by capillary column gas chromatography with electron capture detection (GC/ECD). The relative percent of each congener was compared to the PCB congener profile of the theoretical Aroclor mixture and that for Fox River walleye. The specific congeners differed on average by 17% from the theoretical Aroclor mixture predicted values, and the specific congeners measured in the mixture were on average within 71% of those reported for Fox River fish. The mixture was found to have relatively low AhR activity but high RyR activity. Indirect comparisons suggest that in vivo toxicity was slightly greater than that for Aroclor 1254. This illustrates that Aroclor mixtures are useful for formulating dosing solutions which closely approximate actual environmental exposures. © The Author 2005. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved