Short-Term Impact of AC Harmonics on Aging of NiMH Batteries for Grid Storage Applications

Batteries in energy storage systems are exposed to electrical noise, such as alternating current (AC) harmonics. While there have been many studies investigating whether Lithium-ion batteries are affected by AC harmonics, such studies on Nickel Metal Hydride (NiMH) batteries are scarce. In this study a 10 Ah, 12 V NiMH battery was tested with three different harmonic current frequency overlays during a single charge/discharge cycle: 50 Hz, 100 Hz, and 1000 Hz. No effect on battery internal temperature or gas pressure was found, indicating that NiMH battery aging is not affected by the tested harmonic AC frequencies. This can reduce the cost of energy storage systems, as no extra filters are needed to safeguard the batteries. Instead, the capacitive properties of the batteries give the possibility to use the battery bank itself as a high pass filter, further reducing system complexity and cost

Enhancing structural battery performance : Investigating the role of conductive carbon additives in LiFePO4-Impregnated carbon fiber electrodes

This study centers on investigating the influence of conductive additives, carbon black (Super P) and graphene, within the context of LiFePO4 (LFP)-impregnated carbon fibers (CFs) produced using the powder impregnation method. The performance of these additives was subject to an electrochemical evaluation. The findings reveal that there are no substantial disparities between the two additives at lower cycling rates, highlighting their adaptability in conventional energy storage scenarios. However, as cycling rates increase, graphene emerges as the better performer. At a rate of 1.5C in a half-cell versus lithium, electrodes containing graphene exhibited a discharge capacity of 83 mAhgLFP−1; those with Super P and without any additional conductive additive showed a capacity of 65 mAhgLFP−1 and 48 mAhgLFP−1, respectively. This distinction is attributed to the structural and conductivity advantages inherent to graphene, showing its potential to enhance the electrochemical performance of structural batteries. Furthermore, LFP-impregnated CFs were evaluated in full cells versus pristine CFs, yielding relatively similar results, though with a slightly improved outcome observed with the graphene additive. These results provide valuable insights into the role of conductive additives in structural batteries and their responsiveness to varying operational conditions, underlining the potential for versatile energy storage solutions. © 2024 The AuthorsThe authors also would like to thank the following sources for funding this research: VINNOVA (Sweden's Innovation Agency) through the Competence Centre BASE- Batteries Sweden, the Swedish Research Council [project number 2020\u201305057], Swedish Energy Agency [project number 50508\u20131], Air Force Office of Scientific Research [grant number FA8655-21-1-7039] and STandUP for Energy. </p