Modeling the impacts of changing climatic extremes on streamflow and sediment yield in a northeastern US watershed

Study region: We investigate the impacts of local temperature and precipitation trends on discharge and sediment loading by applying the model to a watershed in the northeastern US, where trends in increasing precipitation exceed those of other regions in North America. Study focus: In this study we simulate the response of watershed sediment loading to changing frequencies and magnitudes of extreme precipitation events using a coupled model that explicitly simulates streambank erosion and failure within a distributed watershed model. To drive the model, we use meteorological inputs from general circulation models (GCMs) as well as from a statistical weather generator (WG). New hydrological insights for the region: Changes in the timing and magnitude of snow melt and spring flows, as well as associated sediment mobilization, resulted from increases in temperature. Increases in discharge and sediment load resulted from increases in precipitation events exceeding the 95th percentile. In runs driven by WG weather data, positive trends were evident in peak (as well as annual) discharge and suspended sediment yields over the years modeled. No clear trends were seen in GCM-driven runs, which do not capture historically-observed trends in extreme precipitation. This work is consistent with other studies in that it shows important changes in discharge and sediment yields from a watershed resulting from ongoing changes in climate

SHG microscopic observations of polar state in Li-doped KTaO3 under electric field

Incipient ferroelectric KTaO3 with off-center Li impurity of the critical concentration of 2.8 mol% was investigated in order to clarify the dipole glass state under electric field. Using optical second-harmonic generation (SHG) microscope, we observed a marked history dependence of SHG intensity through zero-field cooling (ZFC), zero-field heating (ZFH), field heating after ZFC (FH/ZFC) and FH after field cooling (FH/FC). These show different paths with respect to temperature: In the ZFC/ZFH process, weak SHG was observed at low temperature, while in the FH/ZFC process, relatively high SHG appears in a limited temperature range below TF depending on the field strength, and in the FC and FH/FC processes, the SHG exhibits ferroelectric-like temperature dependence: it appears at the freezing temperature of 50K, increases with decreasing temperature and has a tendency of saturation. These experimental results strongly suggest that dipole glass state or polar nano-clusters which gradually freezes with decreasing temperature is transformed into semi-macroscopic polar state under the electric field. However at sufficiently low temperature, the freezing is so strong that the electric field cannot enlarge the polar clusters. These experimental results show that the polar nano-cluster model similar to relaxors would be more relevant in KTaO3 doped with the critical concentration of Li. Further experiments on the anisotropy of SHG determine that the average symmetry of the field-induced polar phase is tetragonal 4mm or 4, which is also confirmed by the X-ray diffraction measurement.Comment: 26 pages, 8 figures, 1 tabl

First-principles study of the electrooptic effect in ferroelectric oxides

We present a method to compute the electrooptic tensor from first principles, explicitly taking into account the electronic, ionic and piezoelectric contributions. It allows us to study the non-linear optic behavior of three ferroelectric ABO_3 compounds : LiNbO_3, BaTiO_3 and PbTiO_3. Our calculations reveal the dominant contribution of the soft mode to the electrooptic coefficients in LiNbO_3 and BaTiO_3 and identify the coupling between the electric field and the polar atomic displacements along the B-O chains as the origin of the large electrooptic response in these compounds.Comment: accepted for publication in Phys. Rev. Let

Spatial patterns of soil nitrification and nitrate export from forested headwaters in the northeastern United States

Nitrogen export from small forested watersheds is known to be affected by N deposition but with high regional variability. We studied 10 headwater catchments in the northeastern United States across a gradient of N deposition (5.4 - 9.4 kg ha-1 yr-1) to determine if soil nitrification rates could explain differences in stream water NO 3- export. Average annual export of two years (October 2002 through September 2004) varied from 0.1 kg NO3--N ha-1 yr-1 at Cone Pond watershed in New Hampshire to 5.1 kg ha-1 yr-1 at Buck Creek South in the western Adirondack Mountains of New York. Potential net nitrification rates and relative nitrification (fraction of inorganic N as NO3-) were measured in Oa or A soil horizons at 21-130 sampling points throughout each watershed. Stream NO3- export was positively related to nitrification rates (r2 = 0.34, p = 0.04) and the relative nitrification (r2 = 0.37, p = 0.04). These relationships were much improved by restricting consideration to the 6 watersheds with a higher number of rate measurements (59-130) taken in transects parallel to the streams (r 2 of 0.84 and 0.70 for the nitrification rate and relative nitrification, respectively). Potential nitrification rates were also a better predictor of NO3- export when data were limited to either the 6 sampling points closest to the watershed outlet (r2 = 0.75) or sampling points \u3c250 m from the watershed outlet (r2 = 0.68). The basal area of conifer species at the sampling plots was negatively related to NO3- export. These spatial relationships found here suggest a strong influence of near-stream and near-watershed-outlet soils on measured stream NO3- export. Copyright 2012 by the American Geophysical Union

Neutronics methods, models, and applications at the Idaho National Engineering Laboratory for the advanced neutron source reactor three-element core design

A summary of the methods and models used to perform neutronics analyses on the Advanced Neutron Source reactor three-element core design is presented. The applications of the neutral particle Monte Carlo code MCNP are detailed, as well as the expansion of the static role of MCNP to analysis of fuel cycle depletion calculations. Results to date of these applications are presented also. A summary of the calculations not yet performed is also given to provide a {open_quotes}to-do{close_quotes} list if the project is resurrected

Optimizing wetland restoration to improve water quality at a regional scale

Published by IOP Publishing Ltd. Excessive phosphorus (P) export to aquatic ecosystems can lead to impaired water quality. There is a growing interest among watershed managers in using restored wetlands to retain P from agricultural landscapes and improve water quality. We develop a novel framework for prioritizing wetland restoration at a regional scale. The framework uses an ecosystem service model and an optimization algorithm that maximizes P reduction for given levels of restoration cost. Applying our framework in the Lake Champlain Basin, we find that wetland restoration can reduce P export by 2.6% for a budget of $50 M and 5.1$200 M. Sensitivity analysis shows that using finer spatial resolution data for P sources results in twice the P reduction benefits at a similar cost by capturing hot-spots on the landscape. We identify 890 wetlands that occur in more than 75% of all optimal scenarios and represent priorities for restoration. Most of these wetlands are smaller than 7 ha with contributing area less than 100 ha and are located within 200 m of streams. Our approach provides a simple yet robust tool for targeting restoration efforts at regional scales and is readily adaptable to other restoration strategies

Non-linear optical susceptibilities, Raman efficiencies and electrooptic tensors from first-principles density functional perturbation theory

The non-linear response of infinite periodic solids to homogenous electric fields and collective atomic displacements is discussed in the framework of density functional perturbation theory. The approach is based on the 2n + 1 theorem applied to an electric-field-dependent energy functional. We report the expressions for the calculation of the non-linear optical susceptibilities, Raman scattering efficiencies and electrooptic coefficients. Different formulations of third-order energy derivatives are examined and their convergence with respect to the k-point sampling is discussed. We apply our method to a few simple cases and compare our results to those obtained with distinct techniques. Finally, we discuss the effect of a scissors correction on the EO coefficients and non-linear optical susceptibilities

Reactor physics methods, models, and applications used to support the conceptual design of the Advanced Neutron Source

This report summarizes the neutronics analysis performed during 1991 and 1992 in support of characterization of the conceptual design of the Advanced Neutron Source (ANS). The methods used in the analysis, parametric studies, and key results supporting the design and safety evaluations of the conceptual design are presented. The analysis approach used during the conceptual design phase followed the same approach used in early ANS evaluations: (1) a strong reliance on Monte Carlo theory for beginning-of-cycle reactor performance calculations and (2) a reliance on few-group diffusion theory for reactor fuel cycle analysis and for evaluation of reactor performance at specific time steps over the fuel cycle. The Monte Carlo analysis was carried out using the MCNP continuous-energy code, and the few- group diffusion theory calculations were performed using the VENTURE and PDQ code systems. The MCNP code was used primarily for its capability to model the reflector components in realistic geometries as well as the inherent circumvention of cross-section processing requirements and use of energy-collapsed cross sections. The MCNP code was used for evaluations of reflector component reactivity effects and of heat loads in these components. The code was also used as a benchmark comparison against the diffusion-theory estimates of key reactor parameters such as region fluxes, control rod worths, reactivity coefficients, and material worths. The VENTURE and PDQ codes were used to provide independent evaluations of burnup effects, power distributions, and small perturbation worths. The performance and safety calculations performed over the subject time period are summarized, and key results are provided. The key results include flux and power distributions over the fuel cycle, silicon production rates, fuel burnup rates, component reactivities, control rod worths, component heat loads, shutdown reactivity margins, reactivity coefficients, and isotope production rates

Evaluation of [C(sp3)/[C(sp2)] ratio in diamondlike films through the use of a complex dielectric constant

The evaluation of the amount of tetrahedral and trigonal cross-linking, that is, the sp3- and sp2-hybridized carbon, is of great importance in understanding the properties of amorphous carbon films. In this paper we report a method for deducing the [sp3]/[sp2] ratio from the experimental values of the complex dielectric constant as obtained by optical transmittance and reflectance measurements. We assume a Gaussian-like distribution of π and π* electronic densities of states in order to fit the contribution of π→π* to the imaginary part, ε2, of the dielectric constant in the low-energy region. Through the Kramers-Kronig relationships we deduce the corresponding values of the real part ε1 of the dielectric constant for such transitions. By subtracting these values from the measured ε1 we deduce the contribution of σ→σ* to ε1. The Wemple-Didomenico model has been used to obtain the dispersion energy and the average excitation energy. Knowing the plasmon energies, we apply the ‘‘f-sum rule'' to deduce the [sp3]/[sp2] ratio. The method applied to a-C:H films deposited by rf diode sputtering provides results in agreement with those obtained by other techniques

Thermally Induced Nano-Structural and Optical Changes of nc-Si:H Deposited by Hot-Wire CVD

We report on the thermally induced changes of the nano-structural and optical properties of hydrogenated nanocrystalline silicon in the temperature range 200–700 °C. The as-deposited sample has a high crystalline volume fraction of 53% with an average crystallite size of ~3.9 nm, where 66% of the total hydrogen is bonded as ≡Si–H monohydrides on the nano-crystallite surface. A growth in the native crystallite size and crystalline volume fraction occurs at annealing temperatures ≥400 °C, where hydrogen is initially removed from the crystallite grain boundaries followed by its removal from the amorphous network. The nucleation of smaller nano-crystallites at higher temperatures accounts for the enhanced porous structure and the increase in the optical band gap and average gap