Influence of hydrothermal carbonization conditions on the porosity, functionality, and sorption properties of microalgae hydrochars

Green microalgae is a possible feedstock for the production of biofuels, chemicals, food/feed, and medical products. Large-scale microalgae production requires large quantities of water and nutrients, directing the attention to wastewater as a cultivation medium. Wastewater-cultivated microalgae could via wet thermochemical conversion be valorised into products for e.g., water treatment. In this study, hydrothermal carbonization was used to process microalgae polycultures grown in municipal wastewater. The objective was to perform a systematic examination of how carbonization temperature, residence time, and initial pH affected solid yield, composition, and properties. Carbonization temperature, time and initial pH all had statistically significant effects on hydrochar properties, with temperature having the most pronounced effect; the surface area increased from 8.5 to 43.6 m(2) g(-1) as temperature was increased from 180 to 260 degrees C. However, hydrochars produced at low temperature and initially neutral pH generally had the highest capacity for methylene blue adsorption. DRIFTS analysis of the hydrochar revealed that the pH conditions changed the functional group composition, implying that adsorption was electrostatic interactions driven. This study concludes that un-activated hydrochars from wastewater grown microalgae produced at relatively low hydrothermal carbonization temperatures adsorb methylene blue, despite having low surface area

Inflammatory Phenotype of Intrahepatic Sulfatide-Reactive Type II NKT Cells in Humans With Autoimmune Hepatitis

Background: Natural Killer T (NKT) cells are CD1d-restricted innate-like T cells that can rapidly release stored cytokines upon recognition of lipid antigens. In mice, type I NKT cells seem to promote liver inflammation, whereas type II NKT cells seem to restrict hepatitis. Here, we aimed at characterizing the role of human type I and type II NKT in patients with autoimmune hepatitis (AIH).Methods: NKT cells were analyzed by flow cytometry in peripheral blood and liver of AIH patients and control groups. α-galactosylceramide-loaded or sulfatide-loaded tetramers were used to detect type I or II NKT cells, respectively. Hepatic CD1d was stained by in situ-hybridization of liver biopsies.Results and Conclusions: Type II NKT cells were more prevalent in human peripheral blood and liver than type I NKT cells. In AIH patients, the frequency of sulfatide-reactive type II NKT cells was significantly increased in peripheral blood (0.11% of peripheral blood leukocytes) and liver (3.78% of intrahepatic leukocytes) compared to healthy individuals (0.05% and 1.82%) and patients with drug-induced liver injury (0.06% and 2.03%; p < 0.05). Intrahepatic type II NKT cells of AIH patients had a different cytokine profile than healthy subjects with an increased frequency of TNFα (77.8% vs. 59.1%, p < 0.05), decreased IFNγ (32.7% vs. 63.0%, p < 0.05) and a complete lack of IL-4 expressing cells (0% vs. 2.1%, p < 0.05). T cells in portal tracts expressed significantly more CD1d-RNA in AIH livers compared to controls. This study supports that in contrast to their assumed protective role in mice, human intrahepatic, sulfatide-reactive type II NKT cells displayed a proinflammatory cytokine profile in patients with AIH. Infiltrating T cells in portal areas of AIH patients overexpressed CD1d and could thereby activate type II NKT cells

Influence of pyrolysis temperature and production unit on formation of selected PAHs, oxy-PAHs, N-PACs, PCDDs, and PCDFs in biochar - A screening study

The influence of reactor type and operating conditions of the pyrolysis unit on the final concentration of toxic contaminants in biochar remains unclear. Therefore, we determined the concentrations of polycyclic aromatic hydrocarbons (PAHs), oxygenated polycyclic aromatic hydrocarbons (oxy-PAHs), nitrogen-containing polycyclic aromatic compounds (N-PACs), polychlorinated dibenzo-p-dioxins (PCDDs), and dibenzofurans (PCDFs) in biochars produced from three different feedstocks (softwood, wheat straw, and anaerobic digestate). Different scaled pyrolysis units (one batch and two continuous units) at two different temperatures (550 and 700 degrees C) were considered. The results revealed that the type of biomass had a significant influence on the PAH, oxy-PAH, and N-PAC content of the biochars. The configuration and type of the pyrolysis unit influenced only the wheat straw pyrolyzed at 550 degrees C. PCDDs and PCDFs occurred at very low levels in the biochars. In terms of PAH, PCDD, and PCDF content, the biochars assessed in this study represent a low risk to the environment, regardless of the temperature and type and size of the pyrolysis unit.Correction: Weidemann, E., Buss, W., Edo, M. et al. Environ Sci Pollut Res (2018) 25: 3941. https://doi.org/10.1007/s11356-017-0804-6Bio4Energ

Transforming scholarship in the archives through handwritten text recognition:Transkribus as a case study

Purpose: An overview of the current use of handwritten text recognition (HTR) on archival manuscript material, as provided by the EU H2020 funded Transkribus platform. It explains HTR, demonstrates Transkribus, gives examples of use cases, highlights the affect HTR may have on scholarship, and evidences this turning point of the advanced use of digitised heritage content. The paper aims to discuss these issues. - Design/methodology/approach: This paper adopts a case study approach, using the development and delivery of the one openly available HTR platform for manuscript material. - Findings: Transkribus has demonstrated that HTR is now a useable technology that can be employed in conjunction with mass digitisation to generate accurate transcripts of archival material. Use cases are demonstrated, and a cooperative model is suggested as a way to ensure sustainability and scaling of the platform. However, funding and resourcing issues are identified. - Research limitations/implications: The paper presents results from projects: further user studies could be undertaken involving interviews, surveys, etc. - Practical implications: Only HTR provided via Transkribus is covered: however, this is the only publicly available platform for HTR on individual collections of historical documents at time of writing and it represents the current state-of-the-art in this field. - Social implications: The increased access to information contained within historical texts has the potential to be transformational for both institutions and individuals. - Originality/value: This is the first published overview of how HTR is used by a wide archival studies community, reporting and showcasing current application of handwriting technology in the cultural heritage sector

Organiska miljögifter i rökgas och flygaska från sopförbränning

Modern societies produce large quantities of municipal solid waste (MSW), which is commonly disposed of by incineration. This has several advantages: it reduces the waste’s volume and sterilizes it while also enabling energy recovery. However, MSW incineration has some notable disadvantages, the most widely debated of which is probably the production and release of persistent organic pollutants (POP) such as polychlorinated dibenzofurans (PCDF), dibenzo-p-dioxins (PCDD), biphenyls (PCB) and naphthalenes (PCN). Of the 210 PCDF and PCDD congeners, 17 are toxic, with hormone-disrupting and carcinogenic properties. Twelve of the 209 PCB congeners and at least 2 of the 75 PCN also exhibit such properties. These POP form in the post-combustion zones of MSW incineration plants and are removed from the flue gas using filtering devices that trap them in the fly ash This thesis concerns the formation and degradation of POP in processes related to MSW incineration. The first paper describes a case study in which PCDD were forming in filters designed to remove them from flue gases, causing emission-related issues in a full-scale MSW incineration plant. It was shown that the PCDD formation was probably due to chlorophenol condensation on the filters’ surfaces. The second paper describes the validation of a cooling probe designed to prevent POP formation during high temperature (>450 °C) flue gas sampling. The results obtained also confirmed that PCDF and PCDD formation takes place at temperatures below 600 °C. In the third paper, three different fly ashes were subjected to thermal treatment under an inert atmosphere in a rotary kiln and in sealed ampoules at 400 °C. The concentrations, degrees of chlorination and congener profiles of the POP in the treated ashes and emitted gases were compared to those for the untreated ashes. The trends observed for PCDF mirrored those for PCN, while the trends for PCDD closely resembled those for PCB. The PCDF congener profiles of the kiln ash were similar regardless of the initial ash composition, suggesting that the mechanisms of PCDF formation were similar in all cases. The fourth paper describes the surface characterization of the three fly ashes studied in paper three by SEM, EDX, XPS and XRD. In addition, the thermal desorption and subsequent degradation of POP from the ashes was studied at temperatures of 300-900 °C. The composition of the gases released as the temperature increased differed between the ashes and depended on their composition. Doping experiments using isotopically labelled PCDF and PCDD suggests that PCDD desorbed at lower temperatures than PCDF. This thesis examines several problems relating to POP formation during MSW incineration, from sampling to the ultimate fate of incineration residues. The results obtained illustrate the wide range of processes that contribute to thermal POP formation and degradation during and after MSW incineration.Förbränning av hushållssopor är en vanlig metod för att hantera ett växande avfallsproblem. Metoden har flera fördelar, såsom minskning av volym och vikt, sterilisering och energiåtervinning. Sopförbränning har dock vissa nackdelar och det mest debatterade är sannolikt utsläpp av persistenta organiska föroreningar (POPs) som polyklorerad dibensofuran (PCDF), dibenso-p-dioxin (PCDD), bifenyl (PCB) och naftalen (PCN). Det finns totalt 210 PCDF- och PCDD- kongener, med mellan ett till åtta klor på kolskelettet, varav 17 är giftiga med hormonstörande och cancerframkallande egenskaper. Även tolv av totalt 209 PCB-kongener samt minst två av totalt 75 PCN-kongener uppvisar liknande egenskaper. Dessa klorerade organiska föroreningar bildas då rökgaserna kyls ner i sopförbränningsanläggningarna och avlägsnas från rökgaserna med hjälp av filter och hamnar i flygaskan. Denna avhandling handlar om bildning och nedbrytning av POPs i sopförbränningsrelaterade processer.   Den första artikeln är en fallstudie där PCDD bildas i filtren i en fullskalig sopförbränningsanläggning. Bildningen ledde till förhöjda halter organiska föroreningar i rökgaserna, vilket ledde till ökade utsläpp. Den funna bildningsvägen för PCDD i filtren befanns sannolikt bero på kondensation av klorfenoler på filterytorna. Den andra artikeln är en valideringsstudie av en kylprob avsedd att användas vid rökgasprovtagning vid hög temperatur (> 450 °C) för att undvika bildning av POPs under provtagningen. Studien bekräftade att majoriteten av PCDF- och PCDD- bildning i rökgaser från sopförbränning sker vid temperaturer under 600 °C. I den tredje artikeln berättas om behandling av tre olika flygaskor från olika sopförbränningsanläggningar. Askorna behandlades vid 400 °C i inert atmosfär i både en roterugn och i förseglade ampuller. De resulterande koncentrationerna, kloreringsgraderna och kongenprofilerna av de organiska föroreningarna jämfördes. Likheter hittades mellan PCDF och PCN, medan PCDD och PCB betedde sig på ett annat sätt. Studien fann också att PCDF kongenprofiler i aska som behandlats i roterugnen liknade varandra, oberoende av askornas sammansättning, vilket tyder på en liknande bildningsväg. För den fjärde artikeln, genomfördes ytkarakterisering (SEM, EDX, XPS och XRD) på de tre flygaskorna från artikel tre som sedan hettades upp från 30 °C till 900 °C i vacuum. Det som frigjordes på grund av uppvärmningen samt nedbrytningsprodukter från askorna studerades med hjälp av masspektrometri och infraröd spektroskopi. Studien fann att de gaser som frigjordes när temperaturen ökade skilde mellan askorna, beroende på deras sammansättning. Studien fann också att när aska dopad med isotopmärkt PCDF och PCDD utsattes för samma behandling, frigjordes PCDD vid lägre temperatur än PCDF. Denna avhandling berör flera aspekter av problematiken kring klorerade organiska föroreningar som bildas vid sopförbränning, från provtagning till hur man ska hantera flygaskan. Avhandlingen belyser även olika typer av bildning och nedbrytning av POPs i varma processer kopplade till sopförbränning

Emission of per- and polyfluoroalkyl substances from a waste-to-energy plant-occurrence in ashes, treated process water, and first observation in flue gas

Per- and polyfluoroalkyl substances (PFASs) are a large group of compounds commonly used as industrial chemicals and constituents of consumer products, e.g., as surfactants and surface protectors. When products containing PFASs reach their end of life, some end up in waste streams sent to waste-to-energy (WtE) plants. However, the fate of PFASs in WtE processes is largely unknown, as is their potential to enter the environment via ash, gypsum, treated process water, and flue gas. This study forms part of a comprehensive investigation of the occurrence and distribution of PFASs in WtE residues. Sampling was performed during incineration of two different waste mixes: normal municipal solid waste incineration (MSWI) and incineration of a waste mix with 5-8 wt % sewage sludge added to the MSWI (referred to as Sludge:MSWI). PFASs were identified in all examined residues, with short-chain (C4-C7) perfluorocarboxylic acids being the most abundant. Total levels of extractable PFASs were higher during Sludge:MSWI than during MSWI, with the total annual release estimated to be 47 and 13 g, respectively. Furthermore, PFASs were detected in flue gas for the first time (4.0-5.6 ng m-3). Our results demonstrate that some PFASs are not fully degraded by the high temperatures during WtE conversion and can be emitted from the plant via ash, gypsum, treated process water, and flue gas

Distribution of per- and polyfluoroalkyl substances (PFASs ) in a waste-to-energy plant : tracking PFASs in internal residual streams

Per- and polyfluoroalkyl substances (PFASs) constitute a diverse group of man-made chemicals characterized by their water- and oil-repellent properties and persistency. Given their widespread use in consumer products, PFASs will inevitably be present in waste streams sent to Waste-to-Energy (WtE) plants. We have previously observed a subset of PFASs in residual streams (ashes, treated process water, and flue gas) from a WtE plant. However, the transport and distribution of PFASs inside the WtE plant have remained unaddressed. This study is part of a comprehensive investigation to create a synoptic overview of the distribution of PFASs in WtE residues. PFASs were found in all sample types except for boiler ash. The total levels of 18 individual PFASs (Σ18PFASs) in untreated flue gas ranged from 5.2 to 9.5 ng m-3, decreasing with 35% ± 10% after wet flue gas treatment. Σ18PFASs in the condensate ranged from 46 to 50 ng L-1, of which perfluorohexanoic acid (PFHxA) made up 90% on a ng L-1 basis. PFHxA was also dominant in filter ash, where Σ18PFASs ranged from 0.28 to 0.79 ng g-1. This study shows that flue gas treatment can capture some PFASs and transfer them into WtE residues

Combined leaching and plant uptake simulations of PFOA and PFOS under field conditions

Gefördert im Rahmen des Projekts DEA