7,515 research outputs found
A New General Allometric Biomass Model
To implement monitoring and assessment of national forest biomass, it is becoming the trend to develop generalized single-tree biomass models suitable for large scale forest biomass estimation. Considering that the theoretical biomass allometric model developed by West et al. [1,2] was statistically different from the empirical one, the two parameters in the most commonly used biomass equation M=aDb were analyzed in this paper. Firstly, based on the knowledge of geometry, the theoretical value of parameter b was deduced, i.e., b=7/3(~2.33), and the comparison with many empirical studies conducted throughout the globe indicated that the theoretical parameter could describe soundly the average allometric relationship between aboveground biomass M and D (diameter on breast height). Secondly, using five datasets of aboveground biomass which consisted of 1441 M-D pairs of sample trees, the new general biomass allometric model was validated. Finally, the relationship between parameter a and wood density p was analyzed, and the linear regression was developed. The new model, which is not only simple but also species-specific, offers a feasible approach on establishment of generalized biomass models for regional and national forest biomass estimation
Bias Correction in Logarithmic Regression and Comparison with Weighted Regression for Nonlinear Models
Non-linear models with heteroscedasticity are commonly used in ecological and forestry modeling, and logarithmic regression and weighted regression are usually employed to estimate the parameters. Using the single-tree biomass data of three large samples, the bias correction in logarithmic regression for non-linear models was studied and comparison between logarithmic regression and weighted regression was discussed in this paper. Firstly, the imminent cause producing bias in logarithmic regression was analyzed, and a new correction factor was presented with which three commonly used bias correction factors were examined together, and the results showed that the correction factors presented here and derived by Baskerville (1972) should be recommended, which could insure the corrected model to be asymptotically consistent with that fitted by weighted regression. Secondly, the fitting results of weighted regression for non-linear models, using the weight function based on residual errors of the model estimated by ordinary least squares (OLS) and the general weight function (w=1/ƒ(x)2) presented by Zeng (1998) respectively, were compared with each other that showed two weight functions worked well and the general function was more applicable. It was suggested that the best way to fit non-linear models with heteroscedasticity would be using weighted regression, and if the total relative error of the estimates from the model fitted by the general weight function was more than a special allowance such as ±3%, a better weight function based on residual errors of the model fitted by OLS should be used in weighted regression
Modeling Compatible Single-Tree Aboveground Biomass Equations of Masson Pine (Pinus massoniana) in South China
In the background of facing up to the global climate change, it is becoming the inevitable demand to add forest biomass estimation to national forest resource monitoring. The biomass equations to be developed for forest biomass estimation should be compatible with volume equations. Based on the tree volume and aboveground biomass data of Masson pine (Pinus Massoniana Lamb.) in south China, the one, two and three-variable aboveground biomass equations and biomass conversion functions compatible with tree volume equations were constructed using the error-in-variable simultaneous equations in this paper. The results showed: (i) the prediction precision of aboveground biomass estimates from one variable equation was more than 95%; (ii) the regressions of aboveground biomass equations improved slightly when tree height and crown width were used together with diameter on breast height, although the contributions to regressions were statistically significant; (iii) for biomass conversion function on one variable, the conversion factor was decreased with growing diameter, but for conversion function on two variables, the factor was increased with growing diameter while decreased with growing tree height
Wafer Map Defect Patterns Semi-Supervised Classification Using Latent Vector Representation
As the globalization of semiconductor design and manufacturing processes
continues, the demand for defect detection during integrated circuit
fabrication stages is becoming increasingly critical, playing a significant
role in enhancing the yield of semiconductor products. Traditional wafer map
defect pattern detection methods involve manual inspection using electron
microscopes to collect sample images, which are then assessed by experts for
defects. This approach is labor-intensive and inefficient. Consequently, there
is a pressing need to develop a model capable of automatically detecting
defects as an alternative to manual operations. In this paper, we propose a
method that initially employs a pre-trained VAE model to obtain the fault
distribution information of the wafer map. This information serves as guidance,
combined with the original image set for semi-supervised model training. During
the semi-supervised training, we utilize a teacher-student network for
iterative learning. The model presented in this paper is validated on the
benchmark dataset WM-811K wafer dataset. The experimental results demonstrate
superior classification accuracy and detection performance compared to
state-of-the-art models, fulfilling the requirements for industrial
applications. Compared to the original architecture, we have achieved
significant performance improvement.Comment: 6 pages, 2 figures, CIS confernec
Calorific values and ash contents of different organs of Masson pine (Pinus massoniana) in southern China
Calorific values of plants are important indices for evaluating and reflecting material cycle and energy conversion in forest ecosystems. Based on the data of Masson Pine (Pinus massoniana) in southern China, the calorific values (CVs) and ash contents (ACs) of different plant organs were analyzed systematically using hypothesis test and regression analysis in this paper. The results show: (i) the CVs and ACs of different plant organs are almost significantly different, and the order by AFCV (ash-free calorific value) from the largest to the smallest is foliage (23.55 kJ/g), branches (22.25 kJ/g), stem bark (21.71 kJ/g), root (21.52 kJ/g) and stem wood (21.35 kJ/g); and the order by AC is foliage (2.35%), stem bark (1.44%), root (1.42%), branches (1.08%) and stem wood (0.33%); (ii) the CVs and ACs of stem woods on top, middle and lower sections are significantly different, and the CVs are increasing from top to lower sections of trunk while the ACs are decreasing; (iii) the mean GCV (gross calorific value) and AFCV of aboveground part are larger than those of belowground part (roots), and the differences are also statistically significant; (iv) the CVs and ACs of different organs are related, to some extent, to diameter, height and origin of the tree, but the influence degrees of the factors on CVs and ACs are not the same
Upregulation of zinc transporter 2 in the blood-CSF barrier following lead exposure
Zinc (Zn) is an essential element for normal brain function; an abnormal Zn homeostasis in brain and the cerebrospinal fluid (CSF) has been implied in the etiology of Alzheimer's disease (AD). However, the mechanisms that regulate Zn transport in the blood-brain interface remain unknown. This study was designed to investigate Zn transport by the blood-CSF barrier (BCB) in the choroid plexus, with a particular focus on Zn transporter-2 (ZnT2), and to understand if lead (Pb) accumulation in the choroid plexus disturbed the Zn regulatory function in the BCB. Confocal microscopy, quantitative PCR and western blot demonstrated the presence of ZnT2 in the choroidal epithelia; ZnT2 was primarily in cytosol in freshly isolated plexus tissues but more toward the peripheral membrane in established choroidal Z310 cells. Exposure of rats to Pb (single ip injection of 50 mg Pb acetate/kg) for 24 h increased ZnT2 fluorescent signals in plexus tissues by confocal imaging and protein expression by western blot. Similar results were obtained by in vitro experiments using Z310 cells. Further studies using cultured cells and a two-chamber Transwell device showed that Pb treatment significantly reduced the cellular Zn concentration and led to an increased transport of Zn across the BCB, the effect that may be due to the increased ZnT2 by Pb exposure. Taken together, these results indicate that ZnT2 is present in the BCB; Pb exposure increases the ZnT2 expression in choroidal epithelial cells by a yet unknown mechanism and as a result, more Zn ions may be deposited into the intracellular Zn pool, leading to a relative Zn deficiency state in the cytoplasm at the BCB
Design Space Exploration of Neural Network Activation Function Circuits
The widespread application of artificial neural networks has prompted
researchers to experiment with FPGA and customized ASIC designs to speed up
their computation. These implementation efforts have generally focused on
weight multiplication and signal summation operations, and less on activation
functions used in these applications. Yet, efficient hardware implementations
of nonlinear activation functions like Exponential Linear Units (ELU), Scaled
Exponential Linear Units (SELU), and Hyperbolic Tangent (tanh), are central to
designing effective neural network accelerators, since these functions require
lots of resources. In this paper, we explore efficient hardware implementations
of activation functions using purely combinational circuits, with a focus on
two widely used nonlinear activation functions, i.e., SELU and tanh. Our
experiments demonstrate that neural networks are generally insensitive to the
precision of the activation function. The results also prove that the proposed
combinational circuit-based approach is very efficient in terms of speed and
area, with negligible accuracy loss on the MNIST, CIFAR-10 and IMAGENET
benchmarks. Synopsys Design Compiler synthesis results show that circuit
designs for tanh and SELU can save between 3.13-7.69 and 4.45-8:45 area
compared to the LUT/memory-based implementations, and can operate at 5.14GHz
and 4.52GHz using the 28nm SVT library, respectively. The implementation is
available at: https://github.com/ThomasMrY/ActivationFunctionDemo.Comment: 5 pages, 5 figures, 16 conferenc
- …