601 research outputs found
Large-scale Bright Fronts in the Solar Corona: A Review of "EIT waves"
``EIT waves" are large-scale coronal bright fronts (CBFs) that were first
observed in 195 \AA\ images obtained using the Extreme-ultraviolet Imaging
Telescope (EIT) onboard the \emph{Solar and Heliospheric Observatory (SOHO)}.
Commonly called ``EIT waves", CBFs typically appear as diffuse fronts that
propagate pseudo-radially across the solar disk at velocities of 100--700 km
s with front widths of 50-100 Mm. As their speed is greater than the
quiet coronal sound speed (200 km s) and comparable to the
local Alfv\'{e}n speed (1000 km s), they were initially
interpreted as fast-mode magnetoacoustic waves ().
Their propagation is now known to be modified by regions where the magnetosonic
sound speed varies, such as active regions and coronal holes, but there is also
evidence for stationary CBFs at coronal hole boundaries. The latter has led to
the suggestion that they may be a manifestation of a processes such as Joule
heating or magnetic reconnection, rather than a wave-related phenomena. While
the general morphological and kinematic properties of CBFs and their
association with coronal mass ejections have now been well described, there are
many questions regarding their excitation and propagation. In particular, the
theoretical interpretation of these enigmatic events as magnetohydrodynamic
waves or due to changes in magnetic topology remains the topic of much debate.Comment: 34 pages, 19 figure
Catalytic co oxidation and HO direct synthesis over pd and pt-impregnated titania nanotubes
Titania nanotubes (TNTs) impregnated with Pd and Pt nanoparticles are evaluated as heterogeneous catalysts in different conditions in two reactions: catalytic CO oxidation (gas phase, up to 500 °C) and HO direct synthesis (liquid phase, 30 °C). The TNTs are obtained via oxidation of titanium metal and the intermediate layer-type sodium titanate NaTiO. Thereafter, the titanate layers are exfoliated and show self-rolling to TNTs, which, finally, are impregnated with Pd or Pt nanoparticles at room temperature by using Pd(ac) and Pt(ac). The resulting crystalline Pd/TNTs and Pt/TNTs are realized with different lengths (long TNTs: 2.0–2.5 µm, short TNTs: 0.23–0.27 µm) and a specific surface area up to 390 m/g. The deposited Pd and Pt particles are 2–5 nm in diameter. The TNT-derived catalysts show good thermal (up to 500 °C) and chemical stability (in liquid-phase and gas-phase reactions). The catalytic evaluation results in a low CO oxidation light-out temperature of 150 °C for Pt/TNTs (1 wt-%) and promising HO generation with a productivity of 3240 mol kgh (Pd/TNTs, 5 wt-%, 30 °C). Despite their smaller surface area, long TNTs outperform short TNTs with regard to both CO oxidation and HO formation
On the Nature and Genesis of EUV Waves: A Synthesis of Observations from SOHO, STEREO, SDO, and Hinode
A major, albeit serendipitous, discovery of the SOlar and Heliospheric
Observatory mission was the observation by the Extreme Ultraviolet Telescope
(EIT) of large-scale Extreme Ultraviolet (EUV) intensity fronts propagating
over a significant fraction of the Sun's surface. These so-called EIT or EUV
waves are associated with eruptive phenomena and have been studied intensely.
However, their wave nature has been challenged by non-wave (or pseudo-wave)
interpretations and the subject remains under debate. A string of recent solar
missions has provided a wealth of detailed EUV observations of these waves
bringing us closer to resolving their nature. With this review, we gather the
current state-of-art knowledge in the field and synthesize it into a picture of
an EUV wave driven by the lateral expansion of the CME. This picture can
account for both wave and pseudo-wave interpretations of the observations, thus
resolving the controversy over the nature of EUV waves to a large degree but
not completely. We close with a discussion of several remaining open questions
in the field of EUV waves research.Comment: Solar Physics, Special Issue "The Sun in 360",2012, accepted for
publicatio
Validation of Global EUV Wave MHD Simulations and Observational Techniques
Global EUV waves remain a controversial phenomenon more than 20 yr after their discovery by SOHO/EIT. Although consensus is growing in the community that they are most likely large-amplitude waves or shocks, the wide variety of observations and techniques used to identify and analyze them have led to disagreements regarding their physical properties and interpretation. Here, we use a 3D magnetohydrodynamic (MHD) model of the solar corona to simulate an EUV wave event on 2009 February 13 to enable a detailed validation of the various commonly used detection and analysis techniques of global EUV waves. The simulated event exhibits comparable behavior to that of a real EUV wave event, with similar kinematic behavior and plasma parameter evolution. The kinematics of the wave are estimated via visual identification and profile analysis, with both approaches providing comparable results. We find that projection effects can affect the derived kinematics of the wave, due to the variation in fast-mode wave speed with height in the corona. Coronal seismology techniques typically used for estimates of the coronal magnetic field are also tested and found to estimate fast-mode speeds comparable to those of the model. Plasma density and temperature variations of the wave front are also derived using a regularized inversion approach and found to be consistent with observed wave events. These results indicate that global waves are best interpreted as large-amplitude waves and that they can be used to probe the coronal medium using well-defined analysis techniques
Coronal Shock Waves, EUV waves, and Their Relation to CMEs. I. Reconciliation of "EIT waves", Type II Radio Bursts, and Leading Edges of CMEs
We show examples of excitation of coronal waves by flare-related abrupt
eruptions of magnetic rope structures. The waves presumably rapidly steepened
into shocks and freely propagated afterwards like decelerating blast waves that
showed up as Moreton waves and EUV waves. We propose a simple quantitative
description for such shock waves to reconcile their observed propagation with
drift rates of metric type II bursts and kinematics of leading edges of coronal
mass ejections (CMEs). Taking account of different plasma density falloffs for
propagation of a wave up and along the solar surface, we demonstrate a close
correspondence between drift rates of type II bursts and speeds of EUV waves,
Moreton waves, and CMEs observed in a few known events.Comment: 30 pages, 15 figures. Solar Physics, published online. The final
publication is available at http://www.springerlink.co
Coronal Shock Waves, EUV Waves, and Their Relation to CMEs. III. Shock-Associated CME/EUV Wave in an Event with a Two-Component EUV Transient
On 17 January 2010, STEREO-B observed in extreme ultraviolet (EUV) and white
light a large-scale dome-shaped expanding coronal transient with perfectly
connected off-limb and on-disk signatures. Veronig et al. (2010, ApJL 716, 57)
concluded that the dome was formed by a weak shock wave. We have revealed two
EUV components, one of which corresponded to this transient. All of its
properties found from EUV, white light, and a metric type II burst match
expectations for a freely expanding coronal shock wave including correspondence
to the fast-mode speed distribution, while the transient sweeping over the
solar surface had a speed typical of EUV waves. The shock wave was presumably
excited by an abrupt filament eruption. Both a weak shock approximation and a
power-law fit match kinematics of the transient near the Sun. Moreover, the
power-law fit matches expansion of the CME leading edge up to 24 solar radii.
The second, quasi-stationary EUV component near the dimming was presumably
associated with a stretched CME structure; no indications of opening magnetic
fields have been detected far from the eruption region.Comment: 18 pages, 10 figures. Solar Physics, published online. The final
publication is available at http://www.springerlink.co
Looking at Vector Space and Language Models for IR using Density Matrices
In this work, we conduct a joint analysis of both Vector Space and Language
Models for IR using the mathematical framework of Quantum Theory. We shed light
on how both models allocate the space of density matrices. A density matrix is
shown to be a general representational tool capable of leveraging capabilities
of both VSM and LM representations thus paving the way for a new generation of
retrieval models. We analyze the possible implications suggested by our
findings.Comment: In Proceedings of Quantum Interaction 201
The dependence of the EIT wave velocity on the magnetic field strength
"EIT waves" are a wavelike phenomenon propagating in the corona, which were
initially observed in the extreme ultraviolet (EUV) wavelength by the EUV
Imaging Telescope (EIT). Their nature is still elusive, with the debate between
fast-mode wave model and non-wave model. In order to distinguish between these
models, we investigate the relation between the EIT wave velocity and the local
magnetic field in the corona. It is found that the two parameters show
significant negative correlation in most of the EIT wave fronts, {\it i.e.},
EIT wave propagates more slowly in the regions of stronger magnetic field. Such
a result poses a big challenge to the fast-mode wave model, which would predict
a strong positive correlation between the two parameters. However, it is
demonstrated that such a result can be explained by the fieldline stretching
model, \emph{i.e.,} that "EIT waves" are apparently-propagating brightenings,
which are generated by successive stretching of closed magnetic field lines
pushed by the erupting flux rope during coronal mass ejections (CMEs).Comment: 11 pages, 8 figures, accepted for publication in Solar Phy
Radio Bursts Associated with Flare and Ejecta in the 13 July 2004 Event
We investigate coronal transients associated with a GOES M6.7 class flare and
a coronal mass ejection (CME) on 13 July 2004. During the rising phase of the
flare, a filament eruption, loop expansion, a Moreton wave, and an ejecta were
observed. An EIT wave was detected later on. The main features in the radio
dynamic spectrum were a frequency-drifting continuum and two type II bursts.
Our analysis shows that if the first type II burst was formed in the low
corona, the burst heights and speed are close to the projected distances and
speed of the Moreton wave (a chromospheric shock wave signature). The
frequency-drifting radio continuum, starting above 1 GHz, was formed almost two
minutes prior to any shock features becoming visible, and a fast-expanding
piston (visible as the continuum) could have launched another shock wave. A
possible scenario is that a flare blast overtook the earlier transient, and
ignited the first type II burst. The second type II burst may have been formed
by the same shock, but only if the shock was propagating at a constant speed.
This interpretation also requires that the shock-producing regions were located
at different parts of the propagating structure, or that the shock was passing
through regions with highly different atmospheric densities. This complex
event, with a multitude of radio features and transients at other wavelengths,
presents evidence for both blast-wave-related and CME-related radio emissions.Comment: 14 pages, 6 figures; Solar Physics Topical Issue, in pres
- …