14 research outputs found

    Materials Properties of Modifeied Ni-Based Alloy

    Get PDF
    The thermomechanical processing of NiMoCr solid solution nickel base superalloy is the way to considerably influence the grain size. As uniform coarse grain size increases the creep strength and crack growth resistance. In the work, the processing to achieve uniform recrystallized grain structure with variation of thermomechanical parameters is investigated. The creep behavior of the alloy after various hot working conditions is determined. The results of creep tests showed that creep characteristics such as strain rate and lifetime were greatly dependent on the initial hot working conditions and annealing parameters

    Modelling the Surface Roughness of Steel after Laser hardening by using 2D Visibility Network, Convolutional neural Networks and Genetic Programming

    Get PDF
    The surface characterization of materials after Robot Laser Hardening (RLH) is a technically demanding procedure. RLH is commonly used to harden parts, especially when subject to wear. By changing their surface properties, this treatment can offer several benefits such as lower costs for additional machining, no use of cooling agents or chemicals, high flexibility, local hardening, minimal deformation, high accuracy, and automated and integrated process in the production process. However, the surface roughness strongly depends on the heat treatment and parameters used in the process. This article used a network theory approach (i.e., the visibility network in 2D space) to analyze the surface roughness of tool steel EN100083-1 upon RLH. Specifically, two intelligent methods were merged in this investigation. Firstly, a genetic algorithm was applied to derive a relationship between the parameters of the robot laser cell and topological surface properties. Furthermore, convolutional neural networks allowed the assessment of surface roughness based on 2D photographic image

    Restoration and Thermal Stability Investigation of Intermetllic Phase in Exposed Nickel Base Superalloy Udimet 500 Turbine Blades

    Get PDF
    The Udimet 500 nickel base superalloy blade exposed for 50000 hours in land base gas turbine working conditions faced the structure degradation. Six different heat treatments procedures have been applied (the blades were exposed at 900 °C and 1000 °C for different periods with maximum hold of 2500 hours) to rejuvenate the degraded structure. Metallographic work was performed, generally, aging at both temperatures modify the gamma prime size, morphology and distribution characteristics substantially. The volume fraction of secondary gamma prime decreased with increasing aging time

    Improvement in adhesion of sputtered TiB2 coating onto high speed steel by a chromium interlayer.

    No full text
    This work addresses at the development of the use of interlayer of different materials for TiB2 coatings with increased adhesion to the substrate and retained high hardness. Ti and Cr were deposited on stationary high speed steel and silicon wafer substrates by magnetron sputtering as an interlayer material. The resultant coatings were evaluated with respect to fundamental properties such as structure, coating roughness, hardness, modulus and adhesion. It was found that the adhesion of resultant TiB2 coatings was increased tremendously with Cr interlayer, whilst the hardness was slightly increased

    Hierarchical phase evolution in a lamellar Al0.7CoCrFeNi high entropy alloy involving competing metastable and stable phases

    No full text
    Guided by solution thermodynamic modeling coupled with detailed experimental characterization, the present study establishes that the alternating FCC and BCC lamellar microstructure in the Al0.7CoCrFeNi high entropy alloy, is a result of non-equilibrium partitionless solidification from the liquid to single B2 phase, followed by solid-state decomposition. Widmanstätten FCC lamellae form from the allotriomorphic FCC precipitates at the B2 grain boundaries, leading to a lamellar microstructure, divided into two distinct sub-systems. Isothermal annealing further drives these individual sub-systems towards equilibrium via precipitation of ordered intermetallic phases. The transformation in FCC lamellae initiates by the formation of metastable L12 precipitates at shorter annealing times, which are eventually replaced by the equilibrium BCC and B2 phases, forming composite B2+BCC laths, on long term annealing. These results further exemplify that interesting transformation pathways lead to hierarchical microstructures within HEAs, and the fact that as processed conditions in these alloys are often far-from equilibrium
    corecore