Drought stress had a predominant effect over heat stress on three tomato cultivars subjected to combined stress

BACKGROUND: Abiotic stresses due to environmental factors could adversely affect the growth and development of crops. Among the abiotic stresses, drought and heat stress are two critical threats to crop growth and sustainable agriculture worldwide. Considering global climate change, incidence of combined drought and heat stress is likely to increase. The aim of this study was to shed light on plant growth performance and leaf physiology of three tomatoes cultivars (‘Arvento’, ‘LA1994’ and ‘LA2093’) under control, drought, heat and combined stress. RESULTS: Shoot fresh and dry weight, leaf area and relative water content of all cultivars significantly decreased under drought and combined stress as compared to control. The net photosynthesis and starch content were significantly lower under drought and combined stress than control in the three cultivars. Stomata and pore length of the three cultivars significantly decreased under drought and combined stress as compared to control. The tomato ‘Arvento’ was more affected by heat stress than ‘LA1994’ and ‘LA2093’ due to significant decreases in shoot dry weight, chlorophyll a and carotenoid content, starch content and NPQ (non-photochemical quenching) only in ‘Arvento’ under heat treatment. By comparison, the two heat-tolerant tomatoes were more affected by drought stress compared to ‘Arvento’ as shown by small stomatal and pore area, decreased sucrose content, Φ(PSII) (quantum yield of photosystem II), ETR (electron transport rate) and q(L) (fraction of open PSII centers) in ‘LA1994’ and ‘LA2093’. The three cultivars showed similar response when subjected to the combination of drought and heat stress as shown by most physiological parameters, even though only ‘LA1994’ and ‘LA2093’ showed decreased F(v)/F(m) (maximum potential quantum efficiency of photosystem II), Φ(PSII), ETR and q(L) under combined stress. CONCLUSIONS: The cultivars differing in heat sensitivity did not show difference in the combined stress sensitivity, indicating that selection for tomatoes with combined stress tolerance might not be correlated with the single stress tolerance. In this study, drought stress had a predominant effect on tomato over heat stress, which explained why simultaneous application of heat and drought revealed similar physiological responses to the drought stress. These results will uncover the difference and linkage between the physiological response of tomatoes to drought, heat and combined stress and be important for the selection and breeding of tolerant tomato cultivars under single and combine stress

QTL Mapping of Combining Ability and Heterosis of Agronomic Traits in Rice Backcross Recombinant Inbred Lines and Hybrid Crosses

BACKGROUND: Combining ability effects are very effective genetic parameters in deciding the next phase of breeding programs. Although some breeding strategies on the basis of evaluating combining ability have been utilized extensively in hybrid breeding, little is known about the genetic basis of combining ability. Combining ability is a complex trait that is controlled by polygenes. With the advent and development of molecular markers, it is feasible to evaluate the genetic bases of combining ability and heterosis of elite rice hybrids through QTL analysis. METHODOLOGY/PRINCIPAL FINDINGS: In the present study, we first developed a QTL-mapping method for dissecting combining ability and heterosis of agronomic traits. With three testcross populations and a BCRIL population in rice, biometric and QTL analyses were conducted for ten agronomic traits. The significance of general combining ability and special combining ability for most of the traits indicated the importance of both additive and non-additive effects on expression levels. A large number of additive effect QTLs associated with performance per se of BCRIL and general combining ability, and dominant effect QTLs associated with special combining ability and heterosis were identified for the ten traits. CONCLUSIONS/SIGNIFICANCE: The combining ability of agronomic traits could be analyzed by the QTL mapping method. The characteristics revealed by the QTLs for combining ability of agronomic traits were similar with those by multitudinous QTLs for agronomic traits with performance per se of BCRIL. Several QTLs (1-6 in this study) were identified for each trait for combining ability. It demonstrated that some of the QTLs were pleiotropic or linked tightly with each other. The identification of QTLs responsible for combining ability and heterosis in the present study provides valuable information for dissecting genetic basis of combining ability

The Rice HGW Gene Encodes a Ubiquitin-Associated (UBA) Domain Protein That Regulates Heading Date and Grain Weight

Heading date and grain weight are two determining agronomic traits of crop yield. To date, molecular factors controlling both heading date and grain weight have not been identified. Here we report the isolation of a hemizygous mutation, heading and grain weight (hgw), which delays heading and reduces grain weight in rice. Analysis of hgw mutant phenotypes indicate that the hemizygous hgw mutation decreases latitudinal cell number in the lemma and palea, both composing the spikelet hull that is known to determine the size and shape of brown grain. Molecular cloning and characterization of the HGW gene showed that it encodes a novel plant-specific ubiquitin-associated (UBA) domain protein localized in the cytoplasm and nucleus, and functions as a key upstream regulator to promote expressions of heading date- and grain weight-related genes. Moreover, co-expression analysis in rice and Arabidopsis indicated that HGW and its Arabidopsis homolog are co-expressed with genes encoding various components of ubiquitination machinery, implying a fundamental role for the ubiquitination pathway in heading date and grain weight control

Simulation on solidification of an Al-Ni alloy under electromagnetic stirring

The microstructure of Al-Ni alloy has a significant influence on its performance, while electromagnetic stirring is one of the most effective methods for control of solidification structure of Al alloy. To investigate the effect of electromagnetic stirring on the solidification of the ingot, the solidification of the Al-50Ni alloy in vacuum with electromagnetic stirring was described by numerical simulation in this paper; and a three dimensional mathematical model was established. The electromagnetic field was simulated by ANSYS software and the thermal-flow field was simulated by FLUENT software. The coupling between the electromagnetic field and the thermal-flow field was implemented by user-defined subroutines. It is found that the current intensity has significant influences on the fluid flow and the microstructure of the alloy. The simulation results agree well with the experimental results, and the optimum current intensity under the exprimental conditions is 80 A, while the frequency is 50 Hz

Mould taper optimization for continuous casting steels by numerical simulation

A transient, two-dimensional, coupled finite element model was employed to simulate the solidification and shrinkage of continuous casting steels by means of ANSYSTM. In the model, a gap-dependent heat transfer condition was introduced to modify the heat flux function, and the variations of material thermal properties, mechanical properties as well as the yield function with temperature were considered. The solidification and shrinkage processes of four round billets and two square billets were simulated by indirect coupled method. Simulation results show that carbon content, pouring temperature, casting speed and shape of billets have distinct influence on the solidification shrinkage of billets. Ideal continuous parabolic tapers were designed and optimized according to the calculated shrinkage curves of billets

Transcriptome Profiling Unravels the Involvement of Phytohormones in Tomato Resistance to the Tomato Yellow Leaf Curl Virus (TYLCV)

Tomato yellow leaf curl virus (TYLCV) is a serious pathogen transmitted by the whitefly (Bemisia tabaci). Due to the quick spread of the virus, which is assisted by its vector, tomato yield and quality have suffered a crushing blow. Resistance to TYLCV has been intensively investigated in transmission, yet the mechanism of anti-TYLCV remains elusive. Herein, we conducted transcriptome profiling with a TYLCV-resistant cultivar (CLN2777A) and a susceptible line (Moneymaker) to identify the potential mechanism of resistance to TYLCV. Compared to the susceptible line, CLN2777A maintained a lower level of lipid peroxidation (LPO) after TYLCV infection. Through RNA-seq, over 1000 differentially expressed genes related to the metabolic process, cellular process, response to stimulus, biological regulation, and signaling were identified, indicating that the defense response was activated after the virus attack. Further analysis showed that TYLCV infection could induce the expression of the genes involved in salicylic and jasmonic acid biosynthesis and the signal transduction of phytohormones, which illustrated that phytohormones were essential for tomatoes to defend against TYLCV. These findings provide greater insight into the effective source of resistance for TYLCV control, indicating a potential molecular tool for the design of TYLCV-resistant tomatoes

The theoretical study on electronic structure and electromagnetic properties of

First-principles calculations based on density functional theory (DFT) have been carried out to investigate the effects of crystal defects (intrinsic vacancy defects and ion doping) on the microwave dielectric response and the correlative electromagnetic properties of α-MnO2 systematically. The possible role of crystal defects in electromagnetic performance is studied utilizing density of states (DOS) and the bond length between the manganese and oxygen. Lattice distortion is induced by the introduction of crystal defects. The spin-electronic DOS demonstrates that Ni doping enhances the spin-polarization of MnO2, which indicates that the Ni-doped MnO2 possesses certain magnetic characteristic, which is helpful for magnetic loss. The emergence of a new defect mode, contributes to the relaxation polarization phenomenon, so as to enhance the dielectric loss ability. In addition, through the change of the bond length and pseudo gap width, it can be learned that the bond strength and covalency of Mn-O bonds are weakened, which increases the dielectric loss of MnO2. The results throw light on the exploration of theoretical research on the microwave absorbing properties of MnO2 with crystal defects

Development of a Gene-Based High Resolution Melting (HRM) Marker for Selecting the Gene ty-5 Conferring Resistance to Tomato Yellow Leaf Curl Virus

Tomato yellow leaf curl virus (TYLCV) causes serious yield reductions in China. The use of certain resistance genes in tomato varieties has alleviated the impact of the virus to a certain extent. Recently, varieties with the Ty-1, Ty-2, or Ty-3 genes lost their resistance to TYLCV in some areas in China. New genes should be introduced into tomato to maintain the resistance to TYLCV. Tomato line AVTO1227 has excellent resistance to disease due to the resistance gene ty-5. In this study, we screened different types of markers in a tomato F2 population to compare their accuracy and efficiency. The sequencing analysis results were consistent with the high resolution melting (HRM) marker genotype and field identification results. The result confirmed that the functional marker of ty-5 was accurate and reliable. The single nucleotide polymorphism-based HRM genotyping method established in this study can be used for the selection of breeding parent material, gene correlation analysis, and molecular marker-assisted breeding