92 research outputs found
Hydrothermal Formation of the Head-to-Head Coalesced Szaibelyite MgBO2(OH) Nanowires
The significant effect of the feeding mode on the morphology and size distribution of the hydrothermal synthesized MgBO2(OH) is investigated, which indicates that, slow dropping rate (0.5 drop s−1) and small droplet size (0.02 mL d−1) of the dropwise added NaOH solution are favorable for promoting the one-dimensional (1D) preferential growth and thus enlarging the aspect ratio of the 1D MgBO2(OH) nanostructures. The joint effect of the low concentration of the reactants and feeding mode on the hydrothermal product results in the head-to-head coalesced MgBO2(OH) nanowires with a length of 0.5–9.0 μm, a diameter of 20–70 nm, and an aspect ratio of 20–300 in absence of any capping reagents/surfactants or seeds
Low-Dimensional Inorganic Nanofunctional Materials: Design, Assembly, and Application for Chemical Engineering (I)
Unstable Pillar Failure under Soft Loading Condition
AbstractPillar rockburst is an unstable pillar failure and one of the most hazardous problems in the underground mining engineering of deep hard-rock mines. In order to study the mechanism of unstable pillar failure, laboratory tests, numerical simulation, and theoretical analysis are adopted. The disc spring group was used to realize the soft loading function of testing machine, where loading stiffness of testing machine can be adjusted by changing the number and combination mode of disc springs. The results show that the loading stiffness of testing machine has major effect on the post-peak failure behavior of rock specimen, which means that the elastic rebound of disc spring group determines the unstable failure characteristics of rock specimen. The sudden jump Δd of rock specimen deformation and the elastic energy release ΔW of disc spring group all increase with the decreased loading stiffness of testing machine, resulting in more severe rock unstable failure (pillar rockburst). The soft loading condition has buffering and delaying effects on rock failure, but it increases the unstable failure intensity of rock specimen. The numerical simulation reproduced the rock unstable failure and the elastic rebound behavior of disc spring group, which also illustrated the damage evolution process of rock unstable failure. The necessary condition of rock unstable failure and the analytical solution of sudden jump Δd and elastic energy release ΔW were derived based on catastrophe theory, which further verified the experimental results. This study reveals the physical essence of unstable pillar failure, which may help to under the mechanism of pillar rockburst and provide references for underground mining
Recommended from our members
Humic Substance Photosensitized Degradation of Phthalate Esters Characterized by 2H and 13C Isotope Fractionation
The photosensitized transformation of organic chemicals is an important degradation mechanism in natural surface waters, aerosols, and water films on surfaces. Dissolved organic matter including humic-like substances (HS), acting as photosensitizers that participate in electron transfer reactions, can generate a variety of reactive species, such as OH radicals and excited triplet-state HS (3HS*), which promote the degradation of organic compounds. We use phthalate esters, which are important contaminants found in wastewaters, landfills, soils, rivers, lakes, groundwaters, and mine tailings. We use phthalate esters as probes to study the reactivity of HS irradiated with artificial sunlight. Phthalate esters with different side-chain lengths were used as probes for elucidation of reaction mechanisms using 2H and 13C isotope fractionation. Reference experiments with the artificial photosensitizers 4,5,6,7-tetrachloro-2′,4′,5′,7′-tetraiodofluorescein (Rose Bengal), 3-methoxy-acetophenone (3-MAP), and 4-methoxybenzaldehyde (4-MBA) yielded characteristic fractionation factors (−4 ± 1, −4 ± 2, and −4 ± 1‰ for 2H; 0.7 ± 0.2, 1.0 ± 0.4, and 0.8 ± 0.2‰ for 13C), allowing interpretation of reaction mechanisms of humic substances with phthalate esters. The correlation of 2H and 13C fractions can be used diagnostically to determine photosensitized reactions in the environment and to differentiate among biodegradation, hydrolysis, and photosensitized HS reaction
Numerical Shear Tests on the Scale Effect of Rock Joints under CNL and CND Conditions
The scale effect of rock joint shear behavior is an important subject in the field of rock mechanics. There is yet a lack of consensus regarding whether the shear strength of rock joints increases, decreases, or remains unchanged as the joint size increases. To explore this issue, a series of repeated and enlarged numerical joint models were established in this study using the particle flow code (PFC2D). The microparameters were calibrated by uniaxial compression tests and shear tests on the concrete material under the constant normal loading (CNL) condition. Three different normal stresses were adopted in numerical shear tests with joint specimen lengths ranging from 100 mm to 800 mm. In addition to the commonly used CNL, the constant normal displacement (CND) condition was established for the purposes of this study; the CND can be considered an extreme case of the constant normal stiffness (CNS) condition. The shear stress-shear displacement curves changed from brittle failure to ductile failure alongside a gradual decrease in peak shear strength as joint length increased. That is, an overall negative scale effect was observed. Positive scale effect or no scale effect is also possible within a limited joint length range. A positive correlation was also observed between the peak shear displacement and joint length, and a negative correlation between shear stiffness and joint length. These above statements are applicable to both repeated and enlarged joints under either CNL or CND conditions. When the normal stress is sufficiently high and shear dilatancy displacement is very small, the shear behavior of rock joints under CNL and CND conditions seems to be consistent. However, for shear tests under low initial normal stress, the peak shear strength achieved under the CND condition is much higher than that under the CNL condition, as the normal stresses of enlarged joints increase to greater extent than the repeated ones during shearing
Repair the Pores and Preserve the Morphology: Formation of High Crystallinity 1D Nanostructures via the Thermal Conversion Route
Effect of Shaft Pillar Extraction on Stability of Main Shaft: A Case Study at Xincheng Gold Mine, China
Mining of ore body in the vicinity of a shaft has a significant influence on its stability. The in situ monitoring and numerical simulation are employed to analyze the effect of shaft pillar extraction at Xincheng Gold Mine. The XI# ore body is recently found around and beneath the shaft, and mining in this area may be detrimental to the shaft. Firstly, on the base of geological survey and in situ displacement monitoring, mechanical parameters of rock mass are obtained and the displacement around the shaft is measured. Secondly, the sensitivities of five main factors that may affect the shaft displacement are analyzed by means of orthogonal experiment according to the numerical simulation with FLAC3D. Finally, a numerical model is established according to the in situ condition; in order to forecast the shaft displacement induced by mining activities of XI# orebody, the Mining Priority Index (MPI) is put forward and used to select the optimal mining sequence. Based on the comparison between the numerical results with the monitoring data, it is determined that the ore within 100 m from the shaft is not suggested to be extracted until the last period of the shaft life
Composition, Structural Evolution and the Related Property Variations in Preparation of Mixed Cesium/Ammonium Acidic Salts of Heteropolyacids
The composition, structural evolution and the related property variations of mixed cesium/ammonium acidic salts of heteropolyacids were investigated in detail by tracking and analyzing the initial precipitates, evaporation residues and the calcined products in their preparation process. Results show that V cannot completely enter the heteropolyanions in the initial precipitates when the Cs+ added amount is low, and the increase in Cs+ adding amount improves the substitution of V for Mo in the heteropolyanions. Both the initial precipitates and the evaporation residues are mixtures of cesium and ammonium salts of heteropolyacids before calcination. Thermal treatment causes the decomposition of the ammonium salts and the formation of single-phase solid solutions from mechanical mixtures. The calcined products of the initial precipitates and the evaporation residues vary greatly in textural properties. The determinants of the catalytic performance for the oxidation of methacrolein to methacrylic acid are acidity and specific surface area of the compounds. The increase in specific surface area mainly improves the conversion of methacrolein, but not the selectivity of methacrylic acid. Insufficient acidity caused by high Cs+ content in the compounds is responsible for the low selectivity
- …