3,192 research outputs found
Effect of Engine Operating Conditions on the Vaporization of Safety Fuels
Tests were conducted with the N.A.C.A. combustion apparatus to determine the effect of compression ratio and engine temperature on the vaporization of a hydrogenated "safety fuel" during the compression stroke under conditions similar to those in a spark-ignition engine. The effects of fuel boiling temperature on vaporization using gasoline, safety fuel, and Diesel fuel oil was also investigated. The results show that increasing the compression ratio has little effect on the rate of fuel vaporization, but that increasing the air temperature by increasing the engine temperature increases the rate of fuel vaporization. The results also show that the vaporized fuel forms a homogeneous mixture with the air more rapidly that does the atomized fuel spray
Multi-limbed locomotion systems for space construction and maintenance
A well developed technology of coordination of multi-limbed locomotory systems is now available. Results from a NASA sponsored study of several years ago are presented. This was a simulation study of a three-limbed locomotion/manipulation system. Each limb had six degrees of freedom and could be used either as a locomotory grasping hand-holds, or as a manipulator. The focus of the study was kinematic coordination algorithms. The presentation will also include very recent results from the Adaptive Suspension Vehicle Project. The Adaptive Suspension Vehicle (ASV) is a legged locomotion system designed for terrestrial use which is capable of operating in completely unstructured terrain in either a teleoperated or operator-on-board mode. Future development may include autonomous operation. The ASV features a very advanced coordination and control system which could readily be adapted to operation in space. An inertial package with a vertical gyro, and rate gyros and accelerometers on three orthogonal axes provides body position information at high bandwidth. This is compared to the operator's commands, injected via a joystick to provide a commanded force system on the vehicle's body. This system is, in turn, decomposed by a coordination algorithm into force commands to those legs which are in contact with the ground
Superluminal Propagation and Acausality of Nonlinear Massive Gravity
Massive gravity is an old idea: trading geometry for mass. Much effort has
been expended on establishing a healthy model, culminating in the current
ghost-free version. We summarize here our recent findings -- that it is still
untenable -- because it is locally acausal: CTC solutions can be constructed in
a small neighborhood of any event.Comment: Contribution to Conference in Honour of the 90th Birthday of Freeman
Dyson -- To Appear in Proceeding. v2: Explicit CTC example, and other
improvements, adde
Development of biaxial test fixture includes cryogenic application
Test fixture has the capability of producing biaxial stress fields in test specimens to the point of failure. It determines biaxial stress by dividing the applied load by the net cross section. With modification it can evaluate materials, design concepts, and production hardware at cryogenic temperatures
X-ray Emission from Magnetically Torqued Disks of Oe/Be Stars
We focus attention on the Oe/Be stars to test the concept that the disks of
these stars form by magnetic channeling of wind material toward the equator.
Calculations are made of the X-rays expected from the Magnetically Torqued Disk
(MTD) model for Be stars discussed by Cassinelli et al. (2002), by Maheswaran
(2003), and by Brown et al. (2004). The dominant parameters in the model are
the value of the velocity law, the rotation rate of the star, ,
and the ratio of the magnetic field energy density to the disk gravitational
energy density, .
The model predictions are compared with the observations obtained for
an O9.5 star Oph from \Berghofer et al. (1996) and for 7 Be stars from
Cohen et al. (1997). Extra considerations are also given here to the well
studied Oe star Oph for which we have observations of the
X-ray line profiles of the triad of He-like lines from the ion Mg XI.Comment: 28 pages with 6 figures. Accepted for publication in Ap
Fuel Vaporization and Its Effect on Combustion in a High-Speed Compression-Ignition Engine
The tests discussed in this report were conducted to determine whether or not there is appreciable vaporization of the fuel injected into a high-speed compression-ignition engine during the time available for injection and combustion. The effects of injection advance angle and fuel boiling temperature were investigated. The results show that an appreciable amount of the fuel is vaporized during injection even though the temperature and pressure conditions in the engine are not sufficient to cause ignition either during or after injection, and that when the conditions are such as to cause ignition the vaporization process affects the combustion. The results are compared with those of several other investigators in the same field
Effect of Nozzle Design on Fuel Spray and Flame Formation in a High-Speed Compression-Ignition Engine
Fuel was injected from different type of injection nozzles into the combustion chamber of the NACA combustion apparatus, operated as a compression-ignition engine. High speed motion pictures were taken of the fuel sprays and combustion. Single-orifice nozzles of 0.008, 0.020, and 0.040 inch diameter, and multiorifice nozzles having 2, 6, and 16 orifices were tested. Nozzles having impinging jets and slit orifices were also included. The photographs indicate that the rate of vapor diffusion from the spray is comparatively slow and that this slow rate of diffusion for combustion chambers with little or no air flow prevents the compression-ignition engine from giving the high performance inherent in the high compression ratios. The sprays from the multiorifice nozzles destroyed the air movement to a greater extent than did those from single orifice nozzles. It is concluded that high performance cannot be realized until the methods of distributing the fuel are improved by means of the injection-nozzle design, air flow, or both
Some Effects of Injection Advance Angle, Engine-Jacket Temperature, and Speed on Combustion in a Compression-Ignition Engine
An optical indicator and a high-speed motion-picture camera capable of operating at the rate of 2,000 frames per second were used to record simultaneously the pressure development and the flame formation in the combustion chamber of the NACA combustion apparatus. Tests were made at engine speeds of 570 and 1,500 r.p.m. The engine-jacket temperature was varied from 100 degrees to 300 degrees F. And the injection advance angle from 13 degrees after top center to 120 degrees before top center. The results show that the course of the combustion is largely controlled by the temperature and pressure of the air in the chamber from the time the fuel is injected until the time at which combustion starts and by the ignition lag. The conclusion is presented that in a compression-ignition engine with a quiescent combustion chamber the ignition lag should be the longest that can be used without excessive rates of pressure rise; any further shortening of the ignition lag decreased the effective combustion of the engine
Ab-initio GMR and current-induced torques in Au/Cr multilayers
We report on an {\em ab-initio} study of giant magnetoresistance (GMR) and
current-induced-torques (CITs) in Cr/Au multilayers that is based on
non-equilibrium Green's functions and spin density functional theory. We find
substantial GMR due primarily to a spin-dependent resonance centered at the
Cr/Au interface and predict that the CITs are strong enough to switch the
antiferromagnetic order parameter at current-densities times smaller
than typical ferromagnetic metal circuit switching densities.Comment: 8 pages, 6 figure
Fuel Spray and Flame Formation in a Compression-Ignition Engine Employing Air Flow
The effects of air flow on fuel spray and flame formation in a high-speed compression-ignition engine have been investigated by means of the NACA combustion apparatus. The process was studied by examining high-speed motion pictures taken at the rate of 2,200 frames a second. The combustion chamber was of the flat-disk type used in previous experiments with this apparatus. The air flow was produced by a rectangular displacer mounted on top of the engine piston. Three fuel-injection nozzles were tested: a 0.020-inch single-orifice nozzle, a 6-orifice nozzle, and a slit nozzle. The air velocity within the combustion chamber was estimated to reach a value of 425 feet a second. The results show that in no case was the form of the fuel spray completely destroyed by the air jet although in some cases the direction of the spray was changed and the spray envelope was carried away by the moving air. The distribution of the fuel in the combustion chamber of a compression-ignition engine can be regulated to some extent by the design of the combustion chamber, by the design of the fuel-injection nozzle, and by the use of air flow
- …