42 research outputs found
Radiostereometric Analysis of Femoral Head Penetration in Cross-Linked Polyethylene in THR Patients
Background: In the young total hip replacement (THR) population limiting polyethylene liner wear is crucial to preventing premature implant failure. Highly cross-linked ultra-high molecular weight polyethylene (HXLPE) liners were designed to improve wear resistance of polyethylene liners. Radiostereometric analysis (RSA) provides highly precise measurements of liner wear. This study utilized RSA to characterize wear of conventional versus HXLPE liners up to five years following THR.
Methods: This IRB-approved, prospective, randomized, blinded study, involved 46 patients with a mean age of 58 and BMI of 30. Each patient was double randomized to receive a conventional or HXLPE liner with an uncemented titanium mesh or tantalum trabecular metal cup. Both liners were prepared from compression-molded GUR 1050 resin without calcium stearate, while HXLPE liners undergo further e-beam irradiation and annealing. At the time of surgery, 1mm tantalum RSA markers were implanted around the liner periphery, femur and periacetabular bone. RSA examinations, Harris Hip, UCLA, WOMAC, SF-36 scores were obtained pre-operatively, post-operatively, at six weeks, six months and annually through five years.
Results: All patients had statistically significant improvement in Harris Hip, WOMAC and SF-36 PCS scores following THR with no difference between cohorts. On RSA examination, of titanium shells, HXLPE liners revealed significantly lower femoral head penetration at each follow up except six weeks and six months (p
Conclusion: In this young THR population RSA shows significantly less femoral head penetration in the HXLPE liners compared to conventional liners. Novel RSA techniques have been developed to determine polyethylene wear in patients
Tantalum versus Titanium Acetabular Shells in Young Active THR Patients: A Radiostereometric Analysis (RSA) Study
Introduction: In the active THR (total hip replacement) population, acetabular component stability is crucial for preventing implant failure. Titanium fiber metal coating is the most common material used in cementless THR. Trabecular metal, composed of porous tantalum, is designed to improve tissue infiltration and limit migration. It is unknown if tantalum offers an advantage over titanium in the biologic fixation of porous-coated acetabular shells. Radiostereometric analysis (RSA) provides highly precise measurements of micromotion that are otherwise not detectable by routine radiographs.
Methods: In this IRB approved, prospective, randomized, blinded study, 46 patients received a primary THR by a single surgeon. Each patient was randomized to receive a titanium (23) or tantalum (23) uncemented cup. Tantalum RSA markers were implanted around the polyethylene liner and into the patient’s femur and periacetabular bone. Also, patients received either a highly cross-linked (n=25) or a conventional liner (n=21). RSA examinations, Harris Hip, UCLA, WOMAC, SF-12 scores were obtained at 10 days, 6 months, and annually through 5 years.
Results: The randomized groups had comparable mean age, preoperative activity, and average BMI. The tantalum shells demonstrated less median translation than the titanium shells at each time-point, but there was no statistical difference between the two shells. At 6 months median translation of tantalum and titanium was -0.01mm and 0.04mm and remained stable with median translation of -0.02mm and 0.04mm at four years. Mean UCLA, WOMAC, Harris Hip, and SF-12 PCS and MCS scores improved similarly in both groups.
Conclusions: After THR, both patient cohorts had excellent clinical outcomes with statistically significant improvements in function and pain relief. Although tantalum porous-coated acetabular shells demonstrated less y-translation and y-rotation at all time points, there was no statistically significant difference in shell migration and both shells demonstrated excellent stability with minimal micromotion at four years
Radiostereometric Analysis of Tantalum vs. Titanium Acetabular Shells in Young THR Patients
Introduction: In the active total hip replacement (THR) population, maintaining acetabular component stability and limiting polyethylene wear are crucial components to preventing premature implant failure. Titanium with Co/Cr/Mo fiber metal coating is among the most common materials used in cementless THR. Trabecular metal, composed of porous tantalum, has a metallic strut design resembling trabecular bone, designed to improve tissue infiltration and limit migration. This study assesses the stability and clinical outcomes of tantalum versus titanium acetabular shells using radiostereometric analysis (RSA) technology.
Methods: In this IRB approved, prospective, randomized, blinded study, 46 patients received a primary THR by a single surgeon (DCA). Each patient was randomized to receive a titanium (23) (Trilogy, Zimmer) or tantalum (23) (Modular tantalum shell, Zimmer) uncemented hemispheric cup and either a highly-crosslinked or conventional polyethylene liner. Tantalum RSA markers were implanted around the liner periphery, femur, and periacetabular bone in each patient. RSA examinations, Harris Hip, UCLA, WOMAC, SF-36 scores were obtained at 10 days, 6 months, and annually with the furthest patients evaluated through 5 years.
Results: Median translation was greater at all time points for the tantalum mesh cups except for the 3-year follow-up, however due to large standard errors, there was no significant difference between the two designs (p\u3e0.05). These large standard errors were predominantly caused by two outliers, neither of which had clinical evidence of loosening at 5 years follow-up. Mean UCLA, WOMAC, Harris Hip, and SF-36 PCS and MCS scores improved similarly in both groups.
Conclusions: In this young THR population, both titanium and tantalum acetabular shells demonstrated excellent stability at five years follow up. Tantalum shells demonstrated slightly greater micromotion, but there was no statistically significant difference in shell migration. Outstanding clinical outcomes with statistically significant improvements in function and pain relief were observed in both groups
Baker Center Journal of Applied Public Policy - Vol. IV, No.II
This special edition includes articles from speakers at a 2010 conference - Howard H. Baker, Jr: A Life in Public Service and a special addendum including photographs and cartoons from Sen. Baker\u27s career
"The Book of Negroes’ illustrated edition: circulating African-Canadian history through the Middlebrow"
This article examines the 2009 deluxe illustrated edition of Lawrence Hill’s Commonwealth Writers’ Prize– and Canada Reads–winning novel The Book of Negroes, originally published in 2007. It relates the story of Aminata, a West African girl kidnapped and sold into slavery, and her experiences on an indigo plantation in the American south, followed by further displacements to Charleston, Nova Scotia, Sierra Leone, and London. In New York, as the Revolutionary War comes to a close, Aminata becomes the scribe for the Book of Negroes, documenting the Black Loyalists, as well as the slaves and indentured servants of white Loyalists, granted passage by the British to Canada. Hill has commented that the Book of Negroes is an important document about which Canadians are largely ignorant. This desire to circulate knowledge about African-Canadian history through the novel is particularly manifest in the illustrated edition of 2009, where a photograph of the Book of Negroes features prominently, along with countless other images and captions which supplement and interrupt Hill’s narrative. This article considers the significance and implications of this “keepsake” or “souvenir” edition, particularly its circulation of knowledge about African-Canadian history through visual pleasure
BMQ
BMQ: Boston Medical Quarterly was published from 1950-1966 by the Boston University School of Medicine and the Massachusetts Memorial Hospitals
Stability of a Tapered Femoral Stem in Total Hip Arthroplasty using Radiostereometric Analysis
Introduction: Early femoral implant stability is essential to long-term success in total hip replacement (THR). Radiostereometric analysis (RSA) provides highly precise measurements of stem micromotion relative to the femur that are otherwise not detectable by routine radiographs. This study characterized micromotion of a tapered, cementless femoral stem using RSA up to 5 years following THR.
Methods: This IRB-approved, prospective, randomized, blinded study, involved 46 patients with a mean age of 58 and BMI of 30. All patients received a cementless, porous-coated titanium double tapered stem (M/L Taper, Zimmer) manufactured with 3 tantalum RSA beads and underwent primary THR by a single surgeon (DCA). RSA examinations, Harris Hip, UCLA, WOMAC, SF-36 scores were obtained at 10 days, 6 months, and annually through 5 years.
Results: Thirty-four patients have RSA analyses at five years. The y-axis stem subsidence was greatest in the first 6 months (0.09 mm/yr), and stabilized thereafter with minimal further micromotion. The median stem subsidence was 0.01 ± 0.06 mm (standard error, SE) at 5 years. There was a statistically significant difference in subsidence between the 6-month interval and the 5-year interval (p = 0.027). Two outlying patients had significantly higher stem subsidence values at 6 months (0.7 mm and 1.0mm). One stem stabilized without further subsidence after 6 months (0.7mm), and the other stem continued to subside throughout the postoperative period. Neither patient has clinical evidence of loosening. All patients had a statistically significant improvement in pain and function measures following THA (p
Conclusion: This cementless, double-tapered femoral stem shows excellent stability in young THR patients through 5 years, with no clinical or radiologic episodes of failure. The small amount of micromotion is less than that previously reported for similar tapered, cementless stems and approaches the accuracy of RSA (0.05 mm)