Explosive welding technique for joining aluminum and steel tubes

Silver sheet is wrapped around aluminum portion of joint. Mylar powder box is wrapped over silver sheet. Explosion welds silver to aluminum. Stainless-steel tube is placed over silver-aluminum interface. Mylar powder box, covered with Mylar tape, is wrapped around steel member. Explosion welds steel to silver-aluminum interface

Dissimilar metals joint evaluation

Dissimilar metals tubular joints between 2219-T851 aluminum alloy and 304L stainless steel were fabricated and tested to evaluate bonding processes. Joints were fabricated by four processes: (1) inertia (friction) weldings, where the metals are spun and forced together to create the weld; (2) explosive welding, where the metals are impacted together at high velocity; (3) co-extrusion, where the metals are extruded in contact at high temperature to promote diffusion; and (4) swaging, where residual stresses in the metals after a stretching operation maintain forced contact in mutual shear areas. Fifteen joints of each type were prepared and evaluated in a 6.35 cm (2.50 in.) O.D. size, with 0.32 cm (0.13 in.) wall thickness, and 7.6 cm (3.0 in) total length. The joints were tested to evaluate their ability to withstand pressure cycle, thermal cycle, galvanic corrosion and burst tests. Leakage tests and other non-destructive test techniques were used to evaluate the behavior of the joints, and the microstructure of the bond areas was analyzed

Dual Induction of New Microbial Secondary Metabolites by Fungal Bacterial Co-cultivation

We thank the College of Physical Sciences, University of Aberdeen, for provision of infrastructure and facilities in the Marine Biodiscovery Centre. We acknowledge the receipt of funding from the European Union’s Seventh Programme for Research, Technological Development and Demonstration under Grant Agreement No. 312184 (PharmaSea). MR thanks School of Science and Sport, University of the West of Scotland for providing the open-access fees required for the publication.Peer reviewedPublisher PD

Developing Models for Multi-Talker Listening Tasks using the EPIC Architecture: Wrong Turns and Lessons Learned

This report describes the development of a series of computational cognitive architecture models for the multi-channel listening task studied in the fields of audition and human performance. The models can account for the phenomena in which humans can respond to a designated spoken message in the context of multiple simultaneous speech messages from multiple speakers - the so-called "cocktail party effect." They are the first models of a new class that combine psychoacoustic perceptual mechanisms with production-system cognitive processing to account for the end-to-end performance in an important empirical literature.Office of Naval Research, Cognitive Science Program, under grant numbers N00014-10-1-0152 and N00014-13-1-0358, and the U. S. Air Force 711 HW Chief Scientist Seedling programhttp://deepblue.lib.umich.edu/bitstream/2027.42/108165/1/Kieras_Wakefield_TR_EPIC_17_July_2014.pdf-1Description of Kieras_Wakefield_TR_EPIC_17_July_2014.pdf : Technical report conten

The impact of construction commencement intervals on residential production building

One model of operation that production builders can use is continuous construction. They build typical house models and generally work with the same subcontractors. In this continuous operation, an order from the sales department triggers the process, which only commences construction when the first required crew becomes available. In this system the decision to commence construction relies on the readiness of the first activity. However the effects of this decision on the whole construction process are often ignored. This research aims to shed light on the importance of construction commencement decisions by highlighting the consequences of this decision on the whole production system