Synthesis and antibacterial effects of cobalt–cellulose magnetic nanocomposites

© The Royal Society of Chemistry. Green synthesis is employed to prepare cobalt/cellulose nanocomposites with cubic (α-cobalt) cobalt as a main component with antibacterial and magnetic properties. An in situ reduction of aqueous solutions of cobalt ions on a model cellulose substrate surface using hydrogen gas affords spherical, cellulose-stabilised cobalt nanoclusters with magnetic properties and an average diameter of 7 nm that are distributed evenly over the surface of the cellulose fibres. These cobalt/cellulose nanocomposites exhibit good antibacterial action against opportunistic pathogens both Gram-positive (S. aureus) and Gram-negative (E. coli, A. baumannii and P. aeruginosa), with zones of inhibition up to 15 mm, thereby encouraging the deployment of these advanced materials for the treatment of wastewater or within medical dressings. This method of preparation is compared with the analogous in situ reduction of cobalt ions on a cellulose surface using sodium borohydride as reducing agent

Mexican Cartel Tactical Note #20: RPG-29 Anti-Armor Munitions

Note—Up until recently, weapons that provide for armor and bunker defeat capability at the levels that the RPG-29 is capable of, have not been seen in the hands of the Mexican cartels. The fact that they have successfully obtained them—and the origin and mechanism by which they were obtained should be of extreme concern to everyone

Oxidative Dissolution of Lithium and Manganese from Lithium Manganospinel (LiMn 2 O 4 ): Towards Climate-Smart Processes for Critical Metal Recycling

This work reports the oxidative breakdown of the LiMn2O4 structure using alkaline hypochlorite, as a method for recovering both lithium and manganese species. The heterogeneous dissolution rate for this process is monitored through the formation of the permanganate ion. It is found that reaction occurs under activation control, with a barrier that matches that for electron hopping within the spinel. Moreover, this activation barrier is smaller than those observed for typical conventional methods of recovery of lithium or manganese from LiMn2O4; accordingly, the new process is suggested to be climate-smart, despite the low, single-pass, recovery efficiency that results from slow surface kinetics

Evaporative Mass Loss Measurement as a Quality Control Tool for Quality Assurance in the Manufacture of Inks Suitable for High Speed (≥60 m/min) Printing

In any manufacturing environment, it is always important to be able to embrace a culture of traceability of any non-conformed product. For the case of ink manufacture, operator confusion, leading to the mixing-up of solvents, or connecting the incorrect solvent drum to solvent lines, can lead to disastrous consequences that are not trivial for a quality control/quality assurance team to unravel. Accordingly, simple methods for assessing whether the correct solvents were added in the correct ratios to products empower this QA/QC requirement. In this paper, we examine the use of a trivial measurement of evaporative mass loss as a protocol for validating the conformance of manufactured ink to specification. Inspired by the transport-limit that occurs at ultramicroelectrodes in electrochemistry, we develop theory to analyse evaporation rate measurements, and illustrate how vaporisation at the liquid | gas interface is dominated by a diffusion anisotropy, owing to natural convection for organic solvents, manufactured resins and commercialised inks that have been used, inter alia, for the underground transport tickets in the cities of London and Paris. We further demonstrate that the use of incorrect solvents is readily seen through evaporation rate transients, thereby enabling this measurement for human factor mitigation during the ink manufacture process

Linking mineralisation process and sedimentary product in terrestrial carbonates using a solution thermodynamic approach

Determining the processes which generate terrestrial carbonate deposits (tufas, travertines and to a lesser extent associated chemical sediments such as calcretes and speleothems) is a long-standing problem. Precipitation of mineral products from solution reflects a complex combination of biological, equilibrium and kinetic processes, and the different morphologies of carbonate sediment produced by different processes have yet to be clearly demarked. Building on the groundbreaking work of previous authors, we propose that the underlying control on the processes leading to the deposition of these products can be most parsimoniously understood from the thermodynamic properties of their source solutions. Here, we report initial observations of the differences in product generated from spring and lake systems spanning a range of temperature–supersaturation space. We find that at high supersaturation, biological influences are masked by high rates of physico-chemical precipitation, and sedimentary products from these settings infrequently exhibit classic "biomediated" fabrics such as clotted micrite. Likewise, at high temperature (>40 °C) exclusion of vascular plants and complex/diverse biofilms can significantly inhibit the magnitude of biomediated precipitation, again impeding the likelihood of encountering the "bio-type" fabrics. <br></br> Conversely, despite the clear division in product between extensive tufa facies associations and less spatially extensive deposits such as oncoid beds, no clear division can be identified between these systems in temperature–supersaturation space. We reiterate the conclusion of previous authors, which demonstrate that this division cannot be made on the basis of physico-chemical characteristics of the solution alone. We further provide a new case study of this division from two adjacent systems in the UK, where tufa-like deposition continuous on a metre scale is happening at a site with lower supersaturation than other sites exhibiting only discontinuous (oncoidal) deposition. However, a strong microbiological division is demonstrated between these sites on the basis of suspended bacterial cell distribution, which reach a prominent maximum where tufa-like deposits are forming. <br></br> We conclude that at high supersaturation, the thermodynamic properties of solutions provide a highly satisfactory means of linking process and product, raising the opportunity of identifying water characteristics from sedimentological/petrological characteristics of ancient deposits. At low supersaturation, we recommend that future research focuses on geomicrobiological processes rather than the more traditional, inorganic solution chemistry approach dominant in the past

Microstructure from ferroelastic transitions using strain pseudospin clock models in two and three dimensions: a local mean-field analysis

We show how microstructure can arise in first-order ferroelastic structural transitions, in two and three spatial dimensions, through a local meanfield approximation of their pseudospin hamiltonians, that include anisotropic elastic interactions. Such transitions have symmetry-selected physical strains as their $N_{OP}$-component order parameters, with Landau free energies that have a single zero-strain 'austenite' minimum at high temperatures, and spontaneous-strain 'martensite' minima of $N_V$ structural variants at low temperatures. In a reduced description, the strains at Landau minima induce temperature-dependent, clock-like $\mathbb{Z}_{N_V +1}$ hamiltonians, with $N_{OP}$-component strain-pseudospin vectors ${\vec S}$ pointing to $N_V + 1$ discrete values (including zero). We study elastic texturing in five such first-order structural transitions through a local meanfield approximation of their pseudospin hamiltonians, that include the powerlaw interactions. As a prototype, we consider the two-variant square/rectangle transition, with a one-component, pseudospin taking $N_V +1 =3$ values of $S= 0, \pm 1$, as in a generalized Blume-Capel model. We then consider transitions with two-component ($N_{OP} = 2$) pseudospins: the equilateral to centred-rectangle ($N_V =3$); the square to oblique polygon ($N_V =4$); the triangle to oblique ($N_V =6$) transitions; and finally the 3D cubic to tetragonal transition ($N_V =3$). The local meanfield solutions in 2D and 3D yield oriented domain-walls patterns as from continuous-variable strain dynamics, showing the discrete-variable models capture the essential ferroelastic texturings. Other related hamiltonians illustrate that structural-transitions in materials science can be the source of interesting spin models in statistical mechanics.Comment: 15 pages, 9 figure

Effects of O2, Ar, and H2 gases on the field-emission properties of single-walled and multiwalled carbon nanotubes

In this article, the authors compare the effects of O2, Ar, and H2 gases on the field-emission (FE) properties of single-walled carbon nanotubes (SWNTs) and multiwalled carbon nanotubes (MWNTs)

Synthesis and antimicrobial effects of highly dispersed, cellulose-stabilized silver/cellulose nanocomposites

Small, spherical silver nanoclusters were synthesised on the surface of paper as a model cellulosic fibre substrate by a standard chemical reduction method. The concentration of the silver nanoclusters on the substrate surface is roughly proportional to the initial silver salt concentration. However, there is a noticeable degree of nanocluster aggregation to larger agglomerates. The addition of small amounts of α-cellulose, carboxymethyl cellulose or aminocellulose during the synthesis of the silver/cellulose nanocomposites suppresses this aggregation and significantly increases the concentration of the silver nanoclusters on the surface of the fibres of cellulose. These small, surface-stabilised silver nanoclusters, with the desired size and morphology, deposited from aqueous solutions on the surface of cellulosic cotton fibres, show enhanced antibacterial activity against MRSA compared to that of the corresponding silver/cotton nanocomposites prepared in the absence of a cellulosic surface stabiliser

Superparaelectric phase in the ensemble of non-interacting ferroelectric nanoparticles

For the first time we predict the conditions of superparaelectric phase appearance in the ensemble of non-interacting spherical ferroelectric nanoparticles. The superparaelectricity in nanoparticle was defined by analogy with superparamagnetism, obtained earlier in small nanoparticles made of paramagnetic material. Calculations of correlation radius, energetic barriers of polarization reorientation and polarization response to external electric field, were performed within Landau-Ginzburg phenomenological approach for perovskites Pb(Zr,Ti)O3, BiFeO3 and uniaxial ferroelectrics rochelle salt and triglycine sulfate.Comment: 28 pages, 7 figures, 3 Appendices, to be submitted to Phys. Rev.

Scaled free energies, power-law potentials, strain pseudospins and quasi-universality for first-order structural transitions

We consider ferroelastic first-order phase transitions with $N_{OP}$ order-parameter strains entering Landau free energies as invariant polynomials, that have $N_V$ structural-variant Landau minima. The total free energy includes (seemingly innocuous) harmonic terms, in the $n = 6 -N_{OP}$ {\it non}-order-parameter strains. Four 3D transitions are considered, tetragonal/orthorhombic, cubic/tetragonal, cubic/trigonal and cubic/orthorhombic unit-cell distortions, with respectively, $N_{OP} = 1, 2, 3$ and 2; and $N_V = 2, 3, 4$ and 6. Five 2D transitions are also considered, as simpler examples. Following Barsch and Krumhansl, we scale the free energy to absorb most material-dependent elastic coefficients into an overall prefactor, by scaling in an overall elastic energy density; a dimensionless temperature variable; and the spontaneous-strain magnitude at transition $\lambda <<1$. To leading order in $\lambda$ the scaled Landau minima become material-independent, in a kind of 'quasi-universality'. The scaled minima in $N_{OP}$-dimensional order-parameter space, fall at the centre and at the $N_V$ corners, of a transition-specific polyhedron inscribed in a sphere, whose radius is unity at transition. The `polyhedra' for the four 3D transitions are respectively, a line, a triangle, a tetrahedron, and a hexagon. We minimize the $n$ terms harmonic in the non-order-parameter strains, by substituting solutions of the 'no dislocation' St Venant compatibility constraints, and explicitly obtain powerlaw anisotropic, order-parameter interactions, for all transitions. In a reduced discrete-variable description, the competing minima of the Landau free energies induce unit-magnitude pseudospin vectors, with $N_V +1$ values, pointing to the polyhedra corners and the (zero-value) center.Comment: submitted to PR