3,434 research outputs found

    Direct in-vial collection for liquid-scintillation assay of carbon-14 and tritium

    Get PDF
    Dissolution of biological materials combines the simplicity of oxygen-flask combustion with the reproducibility and purity of the final product, and convenience of direct in-vial collection of the sample by the sealed-tube method. It assures quantitative and reproducible recoveries

    Combustion method for assay of biological materials labeled with carbon-14 or tritium, or double-labeled

    Get PDF
    Dry catalytic combustion at high temperatures is used for assaying biological materials labeled carbon-14 and tritium, or double-labeled. A modified oxygen-flask technique is combined with standard vacuum-line techniques and includes convenience of direct in-vial collection of final combustion products, giving quantitative recovery of tritium and carbon-14

    Observational data needs useful for modeling the coma

    Get PDF
    A computer model of comet comae is described; results from assumed composition of frozen gases are summarized and compared to coma observations. Restrictions on relative abundance of some frozen constituents are illustrated. Modeling, when tightly coupled to observational data, can be important for comprehensive analysis of observations, for predicting undetected molecular species and for improved understanding of coma and nucleus. To accomplish this, total gas production rates and relative elemental abundances of H:C:N:O:S are needed as a function of heliocentric distance of the comet. Also needed are relative column densitites and column density profiles with well defined diaphragm range and pointing position on the coma. Production rates are less desirable since they are model dependent. Total number (or upper limits) of molecules in the coma and analysis of unidentified spectral lines are needed also

    Detection of molecular microwave transitions in the 3 mm wavelength range in comet Kohoutek (1973f)

    Get PDF
    Observations of comet Kohoutek made with a 3-mm line receiver mounted on the 11-m NRAO radio dish at Kitt Peak are presented. The detection of line transitions of hydrogen cyanide and methyl cyanide is reported and discussed along with the variability of neutral gas jets. Microwave transitions in molecules of cometary origin are also examined

    Assessment of a flow-through balance for hypersonic wind tunnel models with scramjet exhaust flow simulation

    Get PDF
    The purpose of this investigation were twofold: first, to determine whether accurate force and moment data could be obtained during hypersonic wind tunnel tests of a model with a scramjet exhaust flow simulation that uses a representative nonwatercooled, flow-through balance; second, to analyze temperature time histories on various parts of the balance to address thermal effects on force and moment data. The tests were conducted in the NASA Langley Research Center 20-Inch Mach 6 Wind Tunnel at free-stream Reynolds numbers ranging from 0.5 to 7.4 x 10(exp 6)/ft and nominal angles of attack of -3.5 deg, 0 deg, and 5 deg. The simulant exhaust gases were cold air, hot air, and a mixture of 50 percent Argon and 50 percent Freon by volume, which reached stagnation temperatures within the balance of 111, 214, and 283 F, respectively. All force and moment values were unaffected by the balance thermal response from exhaust gas simulation and external aerodynamic heating except for axial-force measurements, which were significantly affected by balance heating. This investigation showed that for this model at the conditions tested, a nonwatercooled, flow-through balance is not suitable for axial-force measurements during scramjet exhaust flow simulation tests at hypersonic speeds. In general, heated exhaust gas may produce unacceptable force and moment uncertainties when used with thermally sensitive balances

    Automation - Development of the Material-Technological Basis - Changed Conditions of Efficiency

    Get PDF
    This paper was presented at a joint seminar on flexible automation held in Berlin (East) from June 8-11, 1982. The seminar was a collaborative project between IIASA and the Academy of Sciences of the German Democratic Republic. The report and the working material presented to the conference deal, among other things, with the influence of the flexible automation on the further development of the material-technological basis and on the whole system of the productive forces. Hence the following questions arise: Does the qualitatively new level of automation mean in connection with the development and application of micro-electronics and what is flexible automation? What are the constituent elements of the new level of automation and which are the consequences for the development of the material-technological basis? and Which changes within the conditions of efficiency take place due to the new level of automation on the basis of micro-electronics? The presented paper offers some aspects regarding these questions

    High-pressure LOX/hydrocarbon preburners and gas generators

    Get PDF
    The objective of the program was to conduct a small scale hardware test program to establish the technology base required for LOX/hydrocarbon preburners and gas generators. The program consisted of six major tasks; Task I reviewed and assessed the performance prediction models and defined a subscale test program. Task II designed and fabricated this subscale hardware. Task III tested and analyzed the data from this hardware. Task IV analyzed the hot fire results and formulated a preliminary design for 40K preburner assemblies. Task V took the preliminary design and detailed and fabricated three 40K size preburner assemblies, one each fuel-rich LOX/CH, and LOX/RP-1 and one oxidizer rich LOX/CH4. Task VI delivered these preburner assemblies to MSFC for subsequent evaluation
    corecore