10,562 research outputs found
Apollo 15 mission report. Supplement 3: Ascent propulsion system final flight evaluation
Results from the postflight analysis of the ascent propulsion system (APS) performance during the Apollo 15 mission are presented. The duty cycle for the LM-10 APS consisted of two firings, and ascent stage liftoff from the lunar surface and the terminal phase ignition (TPI) burn. An evaluation was made of APS performance for the first firing and found to be satisfactory. No propulsion data was received from the second APS burn; however, all indications were that the burn was nominal. All performance parameters were well within their LM-10 3-sigma limits. Calculated throat erosion at engine cutoff for the LM-10 APS was approximately 3 percent greater than predicted
Polaroid film helps locate objects in inaccessible areas quickly
Polaroid film is used with conventional portable X ray equipment to locate and shoot items or objects in difficult areas. Polaroid film development time is about 20 seconds
Apollo 16, LM-11 ascent propulsion system final flight evaluation
The duty cycle for the LM-11 APS consisted of two firings, an ascent stage liftoff from the lunar surface, and the terminal phase initiation (TPI) burn. APS performance for the first firing was evaluated and found to be satisfactory. No propulsion data were received from the second APS burn; however, all indications were that the burn was nominal. Engine ignition for the APS lunar liftoff burn occured at the Apollo elapsed time (AET) of 175:31:47.9 (hours:minutes:seconds). Burn duration was 427.7 seconds
Apollo 10 LM-4 ascent propulsion system, final flight evaluation
Lunar module ascent propulsion system performance for Apollo 10 missio
Systematic review of the current status of cadaveric simulation for surgical training
Background:
There is growing interest in and provision of cadaveric simulation courses for surgical trainees. This is being driven by the need to modernize and improve the efficiency of surgical training within the current challenging training climate. The objective of this systematic review is to describe and evaluate the evidence for cadaveric simulation in postgraduate surgical training.
Methods:
A PRISMA‐compliant systematic literature review of studies that prospectively evaluated a cadaveric simulation training intervention for surgical trainees was undertaken. All relevant databases and trial registries were searched to January 2019. Methodological rigour was assessed using the widely validated Medical Education Research Quality Index (MERSQI) tool.
Results:
A total of 51 studies were included, involving 2002 surgical trainees across 69 cadaveric training interventions. Of these, 22 assessed the impact of the cadaveric training intervention using only subjective measures, five measured impact by change in learner knowledge, and 23 used objective tools to assess change in learner behaviour after training. Only one study assessed patient outcome and demonstrated transfer of skill from the simulated environment to the workplace. Of the included studies, 67 per cent had weak methodology (MERSQI score less than 10·7).
Conclusion:
There is an abundance of relatively low‐quality evidence showing that cadaveric simulation induces short‐term skill acquisition as measured by objective means. There is currently a lack of evidence of skill retention, and of transfer of skills following training into the live operating theatre
Surface Contribution to Raman Scattering from Layered Superconductors
Generalizing recent work, the Raman scattering intensity from a semi-infinite
superconducting superlattice is calculated taking into account the surface
contribution to the density response functions. Our work makes use of the
formalism of Jain and Allen developed for normal superlattices. The surface
contributions are shown to strongly modify the bulk contribution to the
Raman-spectrum line shape below , and also may give rise to additional
surface plasmon modes above . The interplay between the bulk and
surface contribution is strongly dependent on the momentum transfer
parallel to layers. However, we argue that the scattering
cross-section for the out-of-phase phase modes (which arise from interlayer
Cooper pair tunneling) will not be affected and thus should be the only
structure exhibited in the Raman spectrum below for relatively large
. The intensity is small but perhaps observable.Comment: 14 pages, RevTex, 6 figure
Automated Rapid Prototyping of 3D Ceramic Parts
An automated system of manufacturing equipment produces three-dimensional (3D) ceramic parts specified by computational models of the parts. The system implements an advanced, automated version of a generic rapid-prototyping process in which the fabrication of an object having a possibly complex 3D shape includes stacking of thin sheets, the outlines of which closely approximate the horizontal cross sections of the object at their respective heights. In this process, the thin sheets are made of a ceramic precursor material, and the stack is subsequently heated to transform it into a unitary ceramic object. In addition to the computer used to generate the computational model of the part to be fabricated, the equipment used in this process includes: 1) A commercially available laminated-object-manufacturing machine that was originally designed for building woodlike 3D objects from paper and was modified to accept sheets of ceramic precursor material, and 2) A machine designed specifically to feed single sheets of ceramic precursor material to the laminated-object-manufacturing machine. Like other rapid-prototyping processes that utilize stacking of thin sheets, this process begins with generation of the computational model of the part to be fabricated, followed by computational sectioning of the part into layers of predetermined thickness that collectively define the shape of the part. Information about each layer is transmitted to rapid-prototyping equipment, where the part is built layer by layer. What distinguishes this process from other rapid-prototyping processes that utilize stacking of thin sheets are the details of the machines and the actions that they perform. In this process, flexible sheets of ceramic precursor material (called "green" ceramic sheets) suitable for lamination are produced by tape casting. The binder used in the tape casting is specially formulated to enable lamination of layers with little or no applied heat or pressure. The tape is cut into individual sheets, which are stacked in the sheet-feeding machine until used. The sheet-feeding machine can hold enough sheets for about 8 hours of continuous operation
Non-equilibrium dynamics: Studies of reflection of Bose-Einstein condensates
The study of the non-equilibrium dynamics in Bose-Einstein condensed gases
has been dominated by the zero-temperature, mean field Gross-Pitaevskii
formalism. Motivated by recent experiments on the reflection of condensates
from silicon surfaces, we revisit the so-called {\em classical field}
description of condensate dynamics, which incorporates the effects of quantum
noise and can also be generalized to include thermal effects. The noise is
included in a stochastic manner through the initial conditions. We show that
the inclusion of such noise is important in the quantitative description of the
recent reflection experiments
- …