Three dimensional scattering center imaging techniques

Two methods to image scattering centers in 3-D are presented. The first method uses 2-D images generated from Inverse Synthetic Aperture Radar (ISAR) measurements taken by two vertically offset antennas. This technique is shown to provide accurate 3-D imaging capability which can be added to an existing ISAR measurement system, requiring only the addition of a second antenna. The second technique uses target impulse responses generated from wideband radar measurements from three slightly different offset antennas. This technique is shown to identify the dominant scattering centers on a target in nearly real time. The number of measurements required to image a target using this technique is very small relative to traditional imaging techniques

Integral Glass Encapsulation for Solar Arrays

Work reported was performed during the period from August 1977 to December 1978. The program objective was to continue the development of electrostatic bonding (ESB) as an encapsulation technique for terrestrial cells. Economic analyses shows that this process can be a cost-effective method of producing reliable, long lifetime solar modules. When considered in sufficient volume, both material and equipment costs are competitive with conventional encapsulation systems. In addition, the possibility of integrating cell fabrication into the encapsulation process, as in the case of the preformed cell contacts discussed in this report, offers the potential of significant overall systems cost reduction

Experimental Study of Isothermal Wake-Flow Characteristics of Various Flame-Holder Shapes

An investigation of the isothermal wake-flow characteristics of several flame-holder shapes was carried out in a 4- by 4-inch flow chamber. The effects of flame-holder-shape changes on the characteristics of the Karman vortices and thus on the recirculation zones to which experimenters have related the combustion process were obtained for several flame holders. The results may furnish a basis of correlation, of combustion efficiency and stability for similarly shaped flame holders in combustion studies. Values of the spacing ratio-(ratio of lateral spacing to longitudinal spacing of vortices] obtained for the various shapes approximated the theoretical value of 0.36 given by the Karman stability analysis. Variations in vortex strength of more than 200 percent and in frequency of more than 60 percent were accomplished by varying flame-holder shape. A maximum increase in the recirculation parameter of 56 percent over that for a conventional V-gutter was also obtained. Varying flameholder shape and size enables the designer to select many schedules of variations in vortex strength and frequency- not obtainable by changing size only and may make it possible to approach theoretical maximum vortex strength for any given frequency

Comparison of Performance of AN-F-58 Fuel and Gasoline in J34-WE-22 Turbojet Engine

As part of an investigation of the performance of AN-F-58 fuel in various types of turbojet engine, the performance of this fuel in a 3000-pound-thrust turbojet engine has been investigated in an altitude test chamber together with the comparative performance of 62-octane gasoline. The investigation of normal engine performance, which covered a range of engine speeds at altitudes from 5000 to 50,000 feet and flight Mach numbers up to 1.00, showed that both the net thrust and average turbine-outlet temperatures were approximately the same for both fuels. The specific fuel consumption and the combustion efficiency at the maximum engine speeds investigated were approximately the same for both fuels at altitudes up to 35,000 feet, but at an altitude of 50,000 feet the specific fuel consumption was about 9 percent higher and the combustion efficiency was correspondingly lower with the AN-F-58 fuel than with gasoline. The low-engine-speed blow-out limits were about the same for both fuels. Ignition of AN-F-58 fuel with the standard spark plug was possible only with the spark plug in a clean condition; ignition was impossible at all flight conditions investigated when the plug was fouled by an accumulation of liquid fuel from a preceding false start. Use of an extended-electrode spark plug provided satisfactory ignition over a slightly smaller range of altitudes and flight Mach numbers than for gasoline with the standard spark plug

The replica strain gauge technique

Surface deterioration and dimensional stability tests have been carried out on the low melting point replication alloy described in the first report. A range of alloys for the replication of surfaces at temperatures in the range 120 - 150°C has been prepared and evaluated. Preliminary studies of a cold pressing technique using fully annealed commercial purity aluminium as the replication material have shown that the technique has considerable promise for application over a wide range of temperatures

Sudden natural death in a suicide attempt

In this article, we report an unusual case of sudden death arising from a ruptured basilar artery aneurysm during a suicide attempt. A 72-year-old male was found dead in his home after sustaining superficial flesh gunshot wounds (entrance and exit) involving the forehead. The victim had been depressed for several months and had frank suicide intention. The pertinent autopsy findings revealed a superficial nonpenetrating bullet path of the scalp with no skull fractures or brain injuries. However, brain examination identified subarachnoid hemorrhage and subdural clot about the brainstem and within the posterior fossa linked to a basilar artery aneurysm rupture. The cause and manner of death and contributing factors of the "non-lethal" gunshot wounds are discussed

Effects of Naltrexone on Pain Sensitivity and Mood in Fibromyalgia: No Evidence for Endogenous Opioid Pathophysiology

The pathophysiological mechanisms underlying fibromyalgia are still unknown, although some evidence points to endogenous opioid dysfunction. We examined how endogenous opioid antagonism affects pain and mood for women with and without fibromyalgia. Ten women with fibromyalgia and ten age- and gender-matched, healthy controls each attended two laboratory sessions. Each participant received naltrexone (50mg) at one session, and placebo at the other session, in a randomized and double-blind fashion. Participants were tested for changes in sensitivity to heat, cold, and mechanical pain. Additionally, we collected measures of mood and opioid withdrawal symptoms during the laboratory sessions and at home the night following each session. At baseline, the fibromyalgia group exhibited more somatic complaints, greater sensory sensitivity, more opioid withdrawal somatic symptoms, and lower mechanical and cold pain-tolerance than did the healthy control group. Neither group experienced changes in pain sensitivity due to naltrexone administration. Naltrexone did not differentially affect self-reported withdrawal symptoms, or mood, in the fibromyalgia and control groups. Consistent with prior research, there was no evidence found for abnormal endogenous opioid activity in women with fibromyalgia

Technology requirements for post-1985 communications satellites

The technical and functional requirements for commercial communication satellites are discussed. The need for providing quality service at an acceptable cost is emphasized. Specialized services are postulated in a needs model which forecasts future demands. This needs model is based upon 322 separately identified needs for long distance communication. It is shown that the 1985 demand for satellite communication service for a domestic region such as the United States, and surrounding sea and air lanes, may require on the order of 100,000 MHz of bandwith. This level of demand can be met by means of the presently allocated bandwidths and developing some key technologies. Suggested improvements include: (1) improving antennas so that high speed switching will be possible; (2) development of solid state transponders for 12 GHz and possibly higher frequencies; (3) development of switched or steered beam antennas with 10 db or higher gain for aircraft; and (4) continued development of improved video channel compression techniques and hardware

Technology requirements for communication satellites in the 1980's

The key technology requirements are defined for meeting the forecasted demands for communication satellite services in the 1985 to 1995 time frame. Evaluation is made of needs for services and technical and functional requirements for providing services. The future growth capabilities of the terrestrial telephone network, cable television, and satellite networks are forecasted. The impact of spacecraft technology and booster performance and costs upon communication satellite costs are analyzed. Systems analysis techniques are used to determine functional requirements and the sensitivities of technology improvements for reducing the costs of meeting requirements. Recommended development plans and funding levels are presented, as well as the possible cost saving for communications satellites in the post 1985 era