Factors influencing oral colonization of mutans streptococci in young children

The document attached has been archived with permission from the Australian Dental Association. An external link to the publisher’s copy is included.This paper aims to critically review current knowledge about the key factors involved in oral colonization of the cariogenic group of bacteria, mutans streptococci (MS) in young children. MS, consisting mainly of the species Streptococcus mutans and Streptococcus sobrinus, are commonly cultured from the mouths of infants, with prevalence of infection ranging from around 30 per cent in 3 month old predentate children to over 80 per cent in 24 month old children with primary teeth. MS is usually transmitted to children through their mothers, and the risk of transmission increases with high maternal salivary levels of MS and frequent inoculation. Factors that affect the colonization of MS may be divided into bacterial virulence, hostrelated and environmental factors. Complex interaction among these factors determine the success and timing of MS colonization in the child. As clinical studies have shown that caries risk is correlated with age at which initial MS colonization occurred, strategies for the prevention of dental caries should include timely control of colonization of the cariogenic bacteria in the mouths of young children.V Law, WK Seow and G Townsen

A study of primary dental enamel from preterm and full-term children using light and scanning electron microscopy

Purpose: The aim of this study was to examine the enamel thickness of the maxillary primary incisors of preterm children with very low birth weight (< 1,500 g) compared to full-term children with normal birth weight. Methods: A total of 90 exfoliated maxillary primary central incisors were investigated using light microscopy and scanning electron microscopy (SEM). Three serial buccolingual ground sections of each tooth were examined under light microscopy, and maximum dimensions of the prenatally and postnatally formed enamel were measured. Results: The enamel of preterm teeth was approximately 20% thinner than that for fullterm teeth. Most of the reduction was observed in the prenatally formed enamel. This was 5 to 13 times thinner than that for full-term children (P < .001). The catch-up thickness of postnatally formed enamel did not compensate fully for the decrease in prenatal enamel (P < .001). Although none of the teeth used in this study had enamel defects visible to the naked eye, 52% of preterm teeth showed enamel hypoplasia under SEM, compared with only 16% found on full-term teeth (P < .001). These defects were present as pits or irregular, shallow areas of missing enamel. Conclusions: Preterm primary dental enamel is abnormal in surface quality, and is significantly thinner compared to full-term enamel. The thinner enamel is due mainly to reduced prenatal growth and results in smaller dimensions of the primary dentition

Localised enamel hypoplasia of human deciduous canines: genotype or environment?

The document attached has been archived with permission from the Australian Dental Association (9th Jan 2008). An external link to the publisher’s copy is included.A discrete area of defective enamel formation that appears on the labial surface of the crowns of deciduous canine teeth has been described in both recent and prehistoric human population, with reported frequencies varying from 1 to 45 per cent. Suggestions about the aetiology of this localized hypoplasia range from genotypic factors to environmental conditions and systemic effects. The major aims of this study were to describe the frequency of occurrence and pattern of expression of the lesion in Australian Aboriginal and Caucasian ethnic groups, and to clarify the role of genetic factors by examining a sample of twins. The study sample consisted of dental casts of 181 pairs of Australian Caucasian twins, 215 Aborigines and 122 Caucasian singletons, together with 253 extracted deciduous canines. Examination of dental casts and extracted teeth was undertaken under 2X magnification with emphasis being placed upon location and expression of the lesion. The defect was observed in 49 per cent of twins and 44 per cent of Aborigines, but only 36 per cent of singletons. The percentages of affected teeth in each group were: 18 per cent in twins, 17 per cent in Aborigines and 13 per cent in Caucasians. A significant proportion of the defects occurred on the mesial aspect of the labial surface, in the middle area incisocervically, with the majority in the lower jaw. Anumber of significant differences in frequency were observed between groups, sexes, arches and sides. The results confirm some of the findings of previous studies, but also suggest that none of environmental, genetic or systemic factors can be ruled out as being involved in aetiology of the defect. The higher incidence of the lesion occurring on the mesial aspect of the labial surface is suggestive of physical trauma. Also, the vulnerability of the prominent developing mandibular canine, with its thin or missing labial covering of bone, would be expected to lead to higher prevalence of the lesion in the lower jaw. Although not definitive, the results of concordance analyses in twins were suggestive of a possible genetic predisposition in the formation of the lesion. Further research with a greater clinical orientation and emphasis on determing specific aetiological factors within any given environment in different ethnic groups may provide better insight into the ambiguous aetiology of the hypoplastic enamel defect.Sue Taji, Toby Hughes, Jim Rogers, Grant Townsen

Enhancing mechanical properties of wire + arc additively manufactured INCONEL 718 superalloy through in-process thermomechanical processing

Wire + arc additive manufacture (WAAM) was applied to produce INCONEL 718 superalloy (IN718) components in a layer by layer manner; further, interpass cold rolling was introduced to generate in-process thermomechanical processing effect during the deposition process. Mechanical testing showed that with rolling applied, the strength of the solution plus aging treated WAAM IN718 was improved from 1056 MPa (unrolled) to 1351 MPa (rolled) which met the wrought standard (1276 MPa), and the material anisotropy was eliminated. The unrolled IN718 featured large columnar grains developing along the building direction, with the length and width as large as 11 mm and 0.8 mm respectively; rolling induced plastic deformation triggered a non-uniform recrystallization upon successive depositions, which produced a recrystallized core with small columnar grains and numerous finely equiaxed grains with the grain size of 12.7 μm. The overall strengthening produced by interpass rolling was attributed mostly (76%) to the rolling induced recrystallization which produced grain size reduction strengthening and created larger grain boundary area to allow more precipitation at the grain boundaries, and partially (24%) due to the improved aging response of the recrystallized grain structur

Inhalable neutralizing antibodies – promising approach to combating respiratory viral infections

Monoclonal antibodies represent an exciting class of therapeutics against respiratory viral infections. Notwithstanding their specificity and affinity, the conventional parenteral administration is suboptimal in delivering antibodies for neutralizing activity in the airways due to the poor distribution of macromolecules to the respiratory tract. Inhaled therapy is a promising approach to overcome this hurdle in a noninvasive manner, while advances in antibody engineering have led to the development of unique antibody formats which exhibit properties desirable for inhalation. In this Opinion, we examine the major challenges surrounding the development of inhaled antibodies, identify knowledge gaps that need to be addressed and provide strategies from a drug delivery perspective to enhance the efficacy and safety of neutralizing antibodies against respiratory viral infections

Increased traffic exposure and negative birth outcomes: a prospective cohort in Australia

Background: Pregnant women exposed to traffic pollution have an increased risk of negative birth outcomes. We aimed to investigate the size of this risk using a prospective cohort of 970 mothers and newborns in Logan, Queensland. ----- ----- Methods: We examined two measures of traffic: distance to nearest road and number of roads around the home. To examine the effect of distance we used the number of roads around the home in radii from 50 to 500 metres. We examined three road types: freeways, highways and main roads.----- ----- Results: There were no associations with distance to road. A greater number of freeways and main roads around the home were associated with a shorter gestation time. There were no negative impacts on birth weight, birth length or head circumference after adjusting for gestation. The negative effects on gestation were largely due to main roads within 400 metres of the home. For every 10 extra main roads within 400 metres of the home, gestation time was reduced by 1.1% (95% CI: -1.7, -0.5; p-value = 0.001).----- ----- Conclusions: Our results add weight to the association between exposure to traffic and reduced gestation time. This effect may be due to the chemical toxins in traffic pollutants, or because of disturbed sleep due to traffic noise

Basic fibroblast growth factor modulates cell cycle of human umbilical cord-derived mesenchymal stem cells.

Background: Mesenchymal stem cells (MSC) have great potential in regenerative medicine, immunotherapy and gene therapy due to their unique properties of self-renewal, high plasticity, immune modulation and ease for genetic modification. However, production of MSC at sufficient clinical scale remains an issue as in vitro generation of MSC inadequately fulfils the demand with respect to patients. Objectives: This study has aimed to establish optimum conditions to generate and characterize MSC from human umbilical cord (UC-MSC). Materials and methods: To optimize MSC population growth, basic fibroblast growth factor (bFGF) was utilized in culture media. Effects of bFGF on expansion kinetics, cell cycle, survival of UC-MSC, cytokine secretion, expression of early stem-cell markers and immunomodulation were investigated. Results: bFGF supplementation profoundly enhanced UC-MSC proliferation by reducing population doubling time without altering immunophenotype and immunomodulatory function of UC-MSC. However, cell cycle studies revealed that bFGF drove the cells into the cell cycle, as a higher proportion of cells resided in S phase and progressed into M phase. Consistent with this, bFGF was shown to promote expression of cyclin D proteins and their relevant kinases to drive UC-MSC to transverse cell cycle check points, thus, committing the cells to DNA synthesis. Furthermore, supplementation with bFGF changed the cytokine profiles of the cells and reduced their apoptotic level. Conclusion: Our study showed that bFGF supplementation of UC-MSC culture enhanced the cells' growth kinetics without compromising their nature

Inhibitory effects of bisbenzylisoquinolines on synthesis of the inflammatory cytokines interleukin-1 and tumour necrosis factor-alpha

Synthesis of IL-1β and TNFα by human monocytesmacrophages was significantly inhibited by eleven bisbenzylisoquinolines and one half-molecule (benzylisoquinoline), with IC50 values in the μM range. The results indicate that these compounds may have value in the therapy of human diseases where these inflammatory cytokines have a central role in pathogenesis

Longitudinal Current Dissipation in Bose-glass Superconductors

A scaling theory of vortex motion in Bose glass superconductors with currents parallel to the common direction of the magnetic field and columnar defects is presented. Above the Bose-glass transition the longitudinal DC resistivity $\rho_{||}(T)\sim (T-T_{BG})^{\nu' z'}$ vanishes much faster than the corresponding transverse resistivity $\rho_{\perp}(T)\sim (T-T_{BG})^{\nu' (z'-2)}$, thus {\it reversing} the usual anisotropy of electrical transport in the normal state of layered superconductors. In the presence of a current $\bf J$ at an angle $\theta_J$ with the common field and columnar defect axis, the electric field angle $\theta_E$ approaches $\pi/2$ as $T\rightarrow T_{BG}^+$. Scaling also predicts the behavior of penetration depths for the AC currents as $T\rightarrow T_{BG}^-$, and implies a {\it jump discontinuity} at $T_{BG}$ in the superfluid density describing transport parallel to the columns.Comment: 5 pages, revte