Far field scattering pattern of differently structured butterfly scales

The angular and spectral reflectance of single scales of five different butterfly species was measured and related to the scale anatomy. The scales of the pierids Pieris rapae and Delias nigrina scatter white light randomly, in close agreement with Lambert’s cosine law, which can be well understood from the randomly organized beads on the scale crossribs. The reflectance of the iridescent blue scales of Morpho aega is determined by multilayer structures in the scale ridges, causing diffraction in approximately a plane. The purple scales in the dorsal wing tips of the male Colotis regina act similarly as the Morpho scale in the blue, due to multilayers in the ridges, but the scattering in the red occurs as in the Pieris scale, because the scales contain beads with pigment that does not absorb in the red wavelength range. The green–yellow scales of Urania fulgens backscatter light in a narrow spatial angle, because of a multilayer structure in the scale body

Measuring and modelling optical scattering and the colour quality of white pierid butterfly scales

Copyright © 2009 Optical Society of America. This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-17-17-14729 . Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.Colouration in butterfly wings is due to the interaction of light with a covering of scales on both wing surfaces. A combination of nanostructure in the scales, which reflect or scatter light, and absorption from chemical pigments in the scales and wing substrate create the final colour appearance. We compared the wing scale morphology of the pierid butterfly Pieris rapae (Small White) to the reflectance spectra from its wings. Its wing scales contain a dense array of pterin pigment beads. A positive correlation between bead-array density and wing reflectance, at wavelengths where the pigment does not absorb, was identified and characterised. We observed, however, that light scatter from these beads does not account for all of the broadband light scatter observed from the wings. The rest of the scale structure plays an important role in achieving high light scatter. Furthermore, combining the underlying scattering and absorption mechanisms within the butterfly scales enabled us to quantify the optical characteristics of the samples using CIELab colour theory

Treating Systematic Errors in Multiple Sclerosis Data

Multiple sclerosis (MS) is characterized by high variability between patients and, more importantly here, within an individual over time. This makes categorization and prognosis difficult. Moreover, it is unclear to what degree this intra-individual variation reflects the long-term course of irreversible disability and what is attributable to short-term processes such as relapses, to interrater variability and to measurement error. Any investigation and prediction of the medium or long term evolution of irreversible disability in individual patients is therefore confronted with the problem of systematic error in addition to random fluctuations. The approach described in this article aims to assist in detecting relapses in disease curves and in identifying the underlying disease course. To this end neurological knowledge was transformed into simple rules which were then implemented into computer algorithms for pre-editing disease curves. Based on simulations it is shown that pre-editing time series of disability measured with the Expanded Disability Status Scale (EDSS) can lead to more robust and less biased estimates for important disease characteristics, such as baseline EDSS and time to reach certain EDSS levels or sustained progression

Glitter-like iridescence within the bacteroidetes especially Cellulophaga spp.: optical properties and correlation with gliding motility.

This is the final version of the article. Available from the publisher via the DOI in this record.Iridescence results from structures that generate color. Iridescence of bacterial colonies has recently been described and illustrated. The glitter-like iridescence class, created especially for a few strains of Cellulophaga lytica, exhibits an intense iridescence under direct illumination. Such color appearance effects were previously associated with other bacteria from the Bacteroidetes phylum, but without clear elucidation and illustration. To this end, we compared various bacterial strains to which the iridescent trait was attributed. All Cellulophaga species and additional Bacteroidetes strains from marine and terrestrial environments were investigated. A selection of bacteria, mostly marine in origin, were found to be iridescent. Although a common pattern of reflected wavelengths was recorded for the species investigated, optical spectroscopy and physical measurements revealed a range of different glitter-like iridescence intensity and color profiles. Importantly, gliding motility was found to be a common feature of all iridescent colonies. Dynamic analyses of "glitter" formation at the edges of C. lytica colonies showed that iridescence was correlated with layer superposition. Both gliding motility, and unknown cell-to-cell communication processes, may be required for the establishment, in time and space, of the necessary periodic structures responsible for the iridescent appearance of Bacteroidetes.PV acknowledges the support of AFOSR grant FA9550-10-1-0020. BK was a PhD student with a grant from the Ministe`re de la recherche et de l’enseignement supe´rieur. ER acknowledges the support of CNRS grant AIR75515 (‘‘Bacte´ridescence’’ project). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript

A dual weighted residual method applied to complex periodic gratings

An extension of the dual weighted residual (DWR) method to the analysis of electromagnetic waves in a periodic diffraction grating is presented. Using the α,0-quasi-periodic transformation, an upper bound for the a posteriori error estimate is derived. This is then used to solve adaptively the associated Helmholtz problem. The goal is to achieve an acceptable accuracy in the computed diffraction efficiency while keeping the computational mesh relatively coarse. Numerical results are presented to illustrate the advantage of using DWR over the global a posteriori error estimate approach. The application of the method in biomimetic, to address the complex diffraction geometry of the Morpho butterfly wing is also discussed

Spectral reflectance properties of iridescent pierid butterfly wings

The wings of most pierid butterflies exhibit a main, pigmentary colouration: white, yellow or orange. The males of many species have in restricted areas of the wing upper sides a distinct structural colouration, which is created by stacks of lamellae in the ridges of the wing scales, resulting in iridescence. The amplitude of the reflectance is proportional to the number of lamellae in the ridge stacks. The angle-dependent peak wavelength of the observed iridescence is in agreement with classical multilayer theory. The iridescence is virtually always in the ultraviolet wavelength range, but some species have a blue-peaking iridescence. The spectral properties of the pigmentary and structural colourations are presumably tuned to the spectral sensitivities of the butterflies’ photoreceptors

Quasi-ordered photonic structures colour the bluespotted ribbontail ray

Due to the scarcity of blue colour exhibited by natural organisms, highlighting the underlying this colour mechanisms is always very impactful for the understanding of the natural world. In this research, the colour of the blue rounded spots occurring in the skin of Taeniura lymma stingray was unveiled by a combination of experimental and numerical techniques. Our results demonstrated that this blue colour arises from coherent scattering in quasi-ordered photonic structures occurring in the skin of this stingray.</p

Quasi-ordered photonic structures colour the bluespotted ribbontail ray

Due to the scarcity of blue colour exhibited by natural organisms, highlighting the underlying this colour mechanisms is always very impactful for the understanding of the natural world. In this research, the colour of the blue rounded spots occurring in the skin of Taeniura lymma stingray was unveiled by a combination of experimental and numerical techniques. Our results demonstrated that this blue colour arises from coherent scattering in quasi-ordered photonic structures occurring in the skin of this stingray.</p

Bright-white beetle scales optimise multiple scattering of light.

Whiteness arises from diffuse and broadband reflection of light typically achieved through optical scattering in randomly structured media. In contrast to structural colour due to coherent scattering, white appearance generally requires a relatively thick system comprising randomly positioned high refractive-index scattering centres. Here, we show that the exceptionally bright white appearance of Cyphochilus and Lepidiota stigma beetles arises from a remarkably optimised anisotropy of intra-scale chitin networks, which act as a dense scattering media. Using time-resolved measurements, we show that light propagating in the scales of the beetles undergoes pronounced multiple scattering that is associated with the lowest transport mean free path reported to date for low-refractive-index systems. Our light transport investigation unveil high level of optimisation that achieves high-brightness white in a thin low-mass-per-unit-area anisotropic disordered nanostructure.The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007–2013)/ERC grant agreement n [291349] and USAF grant FA9550-10-1-0020.This is the final published version, also available from Nature Publishing at http://www.nature.com/srep/2014/140815/srep06075/full/srep06075.html

Optical costs and benefits of disorder in biological photonic crystals

This is the final version. Available on open access from the Royal Society of Chemistry via the DOI in this record. Photonic structures in ordered, quasi-ordered or disordered forms have evolved across many different animal and plant systems. They can produce complex and often functional optical responses through coherent and incoherent scattering processes, often too, in combination with broadband or narrowband absorbing pigmentation. Interestingly, these systems appear highly tolerant of faults in their photonic structures, with imperfections in their structural order appearing not to impact, discernibly, the systems' optical signatures. The extent to which any such biological system deviates from presenting perfect structural order can dictate the optical properties of that system and, thereby, the optical properties that system delivers. However, the nature and extent of the optical costs and benefits of imperfect order in biological systems demands further elucidation. Here, we identify the extent to which biological photonic systems are tolerant of defects and imperfections. Certainly, it is clear that often significant inherent variations in the photonic structures of these systems, for instance a relatively broad distribution of lattice constants, can consistently produce what appear to be effective visual appearances and optical performances. In this article, we review previously investigated biological photonic systems that present ordered, quasi-ordered or disordered structures. We discuss the form and nature of the optical behaviour of these structures, focusing particularly on the associated optical costs and benefits surrounding the extent to which their structures deviate from what might be considered ideal systems. Then, through detailed analyses of some well-known 1D and 2D structurally coloured systems, we analyse one of the common manifestations of imperfect order, namely, the extent and nature of positional disorder in the systems' spatial distribution of layers and scattering centres. We use these findings to inform optical modelling that presents a quantitative and qualitative description of the optical costs and benefits of such positional disorder among ordered and quasi-ordered 1D and 2D photonic systems. As deviation from perfectly ordered structures invariably limits the performance of technology-oriented synthetic photonic processes, we suggest that the use of bio-inspired fault tolerance principles would add value to applied photonic technologies. This journal isBelgian National Fund for Scientic Research (FRS-FNRS