Identification of Pleuronectiformes species in the Persian Gulf (Khuzestan province) using morphometrics and meristics characteristics

This study was carried out to identify the different species of Pleuronectiformes order in the Khuzestan province waters (Persian Gulf) from March 2003 to June 2005. A Total of 671 specimens were collected by bottom trawl or from 7 main landings. The sampling period was seasonal. 36 main morphometric and meristic characteristics were measured. The results showed that 6 families of Soleidae, Cynoglossidae, Paralichtidae, Bothidae, Psettodidae and Citharidae are found in the studied area consist of 25 species of: Brachirus orentalis, Solea elongata, Monochirus lutenus, Parachirus marmoratus (family Soleidae); Cynoglossus ard, C. bilineatus, C. Puncticeps, C. durbanensis, C. lachneri (family Cynoglossidae); Pseudorombus annulatus, P. elevatus, P. arsius, P. malayanus, P. navaleusis, Paralichthodes algoensis, Poecilopstei javanicus (family Paralichtidae); Arnoglossus aspilos, A. arabicus, Engwrosopon grandisquama, Laeopes guentheri, L. natalensis, L. pectoralis, Psettina brevirictis (family Bothidae); Psettodes erumei (family Psettodidae) and Citharoides macrolepis (family Citharidae)

Reproductive biology of Indian squid, Uroteuthis duvauceli (Orbigny, 1835), in the northern Gulf of Oman

Some aspects of the reproductive biology of the Indian squid, Uroteuthis duvauceli, were studied from June 2006 to May 2007. A total of 1200 specimens were collected from approximately 30-80m depths by trawling in 50 stations, of which 360 samples were studied for sex determination and fecundity. The minimum and maximum total and mantle length, and body weight were recorded in December and June, respectively. The highest range of total length (410-420mm), mantle length (150-160mm) and body weight (90-100g) were encountered in September. The specimens were composed of 34% male and 66% female (M:F=1:2). This species was found to be more abundant in summer. The minimum and maximum ovary weights were 2.1g and 7.9g with an average of 4.9g, respectively. These values for nidamental gland weight were 0.70 and 2.61g with an average of 1.6g. The minimum and maximum absolute fecundity were 25510 (in August) and 375600 (in April), respectively. These values for relative fecundity were 5207 (in April) and 867 (in August), respectively. The highest gonadosomatic index (GSI) was in April (14.38) and the lowest was in July (8.63). This squid is, therefore, assumed to be a spring spawner. Minimum and maximum egg diameter were 0.72mm (in August) and 2.5mm (in April), respectively

Removal of Phenols from Wastewater with Encapsulated Horseradish Peroxidase in Calcium Alginate

Abstract -Horseradish peroxidase was encapsulated in calcium alginate for the purpose of phenol removal. Upon immobilization, pH profile of enzyme activity changes as it shows higher value at basic and acidic solution. Investigation into time course of phenol removal for both encapsulated and free enzyme showed that encapsulated enzyme had nearly similar efficiency in comparison with the same concentration of free enzyme; however the capsules were reusable up to four cycles without any changes in their retention activity

A new bifunctional hybrid nanostructure as an active platform for photothermal therapy and MR imaging

As a bi-functional cancer treatment agent, a new hybrid nanostructure is presented which can be used for photothermal therapy by exposure to one order of magnitude lower laser powers compared to similar nanostructures in addition to substantial enhancment in magnetic resonance imaging (MRI) contrast. This gold-iron oxide hybrid nanostructure (GIHN) is synthesized by a cost-effective and high yield water-based approach. The GIHN is sheilded by PEG. Therefore, it shows high hemo and biocompatibility and more than six month stability. Alongside earlier nanostructures, the heat generation rate of GIHN is compareable with surfactnat-capped gold nanorods (GNRs). Two reasons are behind this enhancement: Firstly the distance between GNRs and SPIONs is adjusted in a way that the surface plasmon resonance of the new nanostructure is similar to bare GNRs and secondly the fraction of GNRs is raised in the hybrid nanostructure. GIHN is then applied as a photothermal agent using laser irradiation with power as low as 0.5 W.cm−2 and only 32% of human breast adenocarcinoma cells could survive. The GIHN also acts as a dose-dependent transvers relaxation time (T2) MRI contrast agent. The results show that the GINH can be considered as a good candidate for multimodal photothermal therapy and MRI

Curcumin Sustained Release with a Hybrid Chitosan-Silk Fibroin Nanofiber Containing Silver Nanoparticles as a Novel Highly Efficient Antibacterial Wound Dressing

Drug loading in electrospun nanofibers has gained a lot of attention as a novel method for direct drug release in an injury site to accelerate wound healing. The present study deals with the fabrication of silk fibroin (SF)-chitosan (CS)-silver (Ag)-curcumin (CUR) nanofibers using the electrospinning method, which facilitates the pH-responsive release of CUR, accelerates wound healing, and improves mechanical properties. Response surface methodology (RSM) was used to investigate the effect of the solution parameters on the nanofiber diameter and morphology. The nanofibers were characterized via Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), zeta potential, and Dynamic Light Scattering (DLS). CS concentration plays a crucial role in the physical and mechanical properties of the nanofibers. Drug loading and entrapment efficiencies improved from 13 to 44% and 43 to 82%, respectively, after the incorporation of Ag nanoparticles. The application of CS hydrogel enabled a pH-responsive release of CUR under acid conditions. The Minimum Inhibitory Concentration (MIC) assay on E. coli and S. aureus bacteria showed that nanofibers with lower CS concentration cause stronger inhibitory effects on bacterial growth. The nanofibers do not have any toxic effect on cell culture, as revealed by in vitro wound healing test on NIH 3T3 fibroblasts

Improving reservoir conformance using gelled polymer systems. Final report, September 25, 1992--July 31, 1996

The objectives of the research program were to (1) identify and develop polymer systems which have potential to improve reservoir conformance of fluid displacement processes, (2) determine the performance of these systems in bulk and in porous media, and (3) develop methods to predict their performance in field applications. The research focused on four types of gel systems--KUSP1 systems that contain an aqueous polysaccharide designated KUSP1, phenolic-aldehyde systems composed of resorcinol and formaldehyde, colloidal-dispersion systems composed of polyacrylamide and aluminum citrate, and a chromium-based system where polyacrylamide is crosslinked by chromium(III). Gelation behavior of the resorcinol-formaldehyde systems and the KUSP1-borate system was examined. Size distributions of aggregates that form in the polyacrylamide-aluminum colloidal-dispersion gel system were determined. Permeabilities to brine of several rock materials were significantly reduced by gel treatments using the KUSP1 polymer-ester (monoethyl phthalate) system, the KUSP1 polymer-boric acid system, and the sulfomethylated resorcinol-formaldehyde system were also shown to significantly reduce the permeability to supercritical carbon dioxide. A mathematical model was developed to simulate the behavior of a chromium redox-polyacrylamide gel system that is injected through a wellbore into a multi-layer reservoir in which crossflow between layers is allowed. The model describes gelation kinetics and filtration of pre-gel aggregates in the reservoir. Studies using the model demonstrated the effect filtration of gel aggregates has on the placement of gel systems in layered reservoirs