Self-propagating high-temperature synthesis of energetic borides

A promising way to synthesize new energy materials based on refactory inorganic compounds is self-propagating high-temperature synthesis of compositions based on boron compounds. This paper describes a laboratory technology of production of aluminum borides. The experimental results of thermogravimetric analysis and particle size analysis obtained for synthesized powders are given. According to thermogravimetric analysis data the degree of oxidation of obtained powders exceeds 95 %. The experimental data have shown that the development of new compositions of high-energy fuel cells using borides can yield high-quality results in the sphere of solid hypersonic engines

On the possibility to fabricate ceramics using fused deposition modeling

The paper presents a uniquely designed device that enables controlled manufacturing of semi-fabricated products from thermoplastic ceramic suspensions by fused deposition modeling. Sintering of the products yields ceramics with high strength and hardness. We use ceramic aluminum oxide (Al2O3) as an example to prove that additive ceramic structures can be produced without noticeable boundaries between layers of the material

Influence of wire geometry on the mechanical behavior of the TiNi design

The present article is aimed at studying the deformation behavior of TiNi wire and knitted metal TiNi mesh under uniaxial tension and revealing the role of wire geometry on their main mechanical characteristics and mechanisms of deformation behavior. The temperature dependence curve of the electrical resistance indicates that a two-stage martensitic transformation of B2!R!B190 is occurring, and is responsible for the superelasticity effect. The TEM results showed that at room temperature, the TiNi wire has a nanocrystalline structure composed of B2 austenite grains. A change in the deformation mechanism was established under the uniaxial tension, where the TiNi wire exhibits the effect of superelasticity, while the knitted metal TiNi mesh made from this wire is characterized by hyperelastic behavior. Fracturing of the knitted metal TiNi mesh requires significant loads of up to 3500 MPa compared to the fracture load of the TiNi wire. With the uniaxial tension of the wire, which maximally repeats the geometry of the wire in knitted metal mesh, an increase in mechanical characteristics was observed

Study of the effect of diamond nanoparticles on the structure and mechanical properties of the medical Mg–Ca–Zn magnesium alloy

The paper addresses the production and investigation of the Mg–Ca–Zn alloy dispersionhardened by diamond nanoparticles. Structural studies have shown that diamond nanoparticles have a modifying effect and make it possible to reduce the average grain size of the magnesium alloy. Reduction of the grain size and introduction of particles into the magnesium matrix increased the yield strength, tensile strength, and ductility of the magnesium alloy as compared to the original alloy after vibration and ultrasonic treatment. The magnesium alloy containing diamond nanoparticles showed the most uniform fracture due to a more uniform deformation of the alloy with particles, which simultaneously increased its strength and ductilit

On the evaporation dynamics of trinitrotoluene microparticles on the glass surface

The results of measuring the time dependence of the concentration of trinitrotoluene (TNT) vapor over its solid microconcentrations on the glass surface with a low TNT concentration on the surface of 100 ng/cm2 are presented. Such microconcentrations of traces are typical for the conditions of anti-terrorist control of objects for the presence of TNT. The measurements were made using a portable multicapillary gas chromatograph (GC) EKHO-V-IDTS (Russia) with TNT vapor concentration. The threshold for determining the concentration of TNT vapor by the EKHO-V-IDTS gas chromatograph corresponds to the modern level and is equal to 10-14 g/cm3. Vapor sampling is performed by a vortex sampling device (VSD), which is used in the anti-terrorist control of objects. It is shown that the initial surface concentration of TNT traces of 100 ng/cm2 on the glass surface decreases to 12 ng/cm2 in a time of 2.6 h due to evaporation into an open half-space under laboratory conditions. The vapor concentration over the residual TNT concentration of 12 ng/cm2 corresponds to the GC sensitivity threshold for TNT vapor concentration equal to 10-14 g/cm3

The low-temperature sol-gel synthesis of metal-oxide films on polymer substrates and the determination of their optical and dielectric properties

Photoactive, optically transparent heterostructures from silver nanowires and titanium dioxide were obtained by the sol-gel method on the surface of a polyethylene terephthalate film. The characteristics of optical transmission on the wavelength and those of dielectric permittivity, conductivity and dissipation on frequency in the range of 25–1,000,000 Hz were investigated

On elliptic solutions of the quintic complex one-dimensional Ginzburg-Landau equation

The Conte-Musette method has been modified for the search of only elliptic solutions to systems of differential equations. A key idea of this a priory restriction is to simplify calculations by means of the use of a few Laurent series solutions instead of one and the use of the residue theorem. The application of our approach to the quintic complex one-dimensional Ginzburg-Landau equation (CGLE5) allows to find elliptic solutions in the wave form. We also find restrictions on coefficients, which are necessary conditions for the existence of elliptic solutions for the CGLE5. Using the investigation of the CGLE5 as an example, we demonstrate that to find elliptic solutions the analysis of a system of differential equations is more preferable than the analysis of the equivalent single differential equation.Comment: LaTeX, 21 page