1,167 research outputs found
DEVELOPMENT OF PASTERIZATION MODES FOR HIGH-SUGAR CANS IN CONTINUOUS ACTING PASTEURIZERS
High-sugar canned fruits, such as jam, marmalade, confiture, are characterized by a high content of soluble dry solids and high acidity, which allows to apply to them pasteurization processes as heat treatment. In comparison with sterilization processes, heat treatment of hermetically sealed canned food during pasteurization is implemented at temperatures less than 100°C.The article presents the results of the development of scientifically-based pasteurization modes for high-sugar canned food for industrial continuous-acting pasteurizers (CAP — continuous-acting pasteurizers) of open type with a temperature in the heating area less than 100°C. For today, such pasteurizers are widely spread due to the simplicity of their design, high productivity, with the option to reduce consumption of water, steam, electricity and to use it for the various types of packaging. So, the actual task of this article is the establishment of canned fruit pasteurization modes for such pasteurizers.The development of pasteurization modes for high-sugar canned food using strawberry jam as a sample was carried out in the experimental equipment simulating the operation of a continuous-acting pasteurizer. The studies were implemented to confirm that the developed modes of heat treatment in the CAP as a matter of fact provide industrial sterility of the produced high-sugar canned food. Optimal pasteurization modes have the following parameters: heat treatment in an autoclave sterilizer at a heating temperature of the heating medium 97°C and stage-by-stage cooling of the products with water at temperatures 70°C, 50°C and 30°C.High-sugar canned fruits, such as jam, marmalade, confiture, are characterized by a high content of soluble dry solids and high acidity, which allows to apply to them pasteurization processes as heat treatment. In comparison with sterilization processes, heat treatment of hermetically sealed canned food during pasteurization is implemented at temperatures less than 100°C.The article presents the results of the development of scientifically-based pasteurization modes for high-sugar canned food for industrial continuous-acting pasteurizers (CAP — continuous-acting pasteurizers) of open type with a temperature in the heating area less than 100°C. For today, such pasteurizers are widely spread due to the simplicity of their design, high productivity, with the option to reduce consumption of water, steam, electricity and to use it for the various types of packaging. So, the actual task of this article is the establishment of canned fruit pasteurization modes for such pasteurizers.The development of pasteurization modes for high-sugar canned food using strawberry jam as a sample was carried out in the experimental equipment simulating the operation of a continuous-acting pasteurizer. The studies were implemented to confirm that the developed modes of heat treatment in the CAP as a matter of fact provide industrial sterility of the produced high-sugar canned food. Optimal pasteurization modes have the following parameters: heat treatment in an autoclave sterilizer at a heating temperature of the heating medium 97°C and stage-by-stage cooling of the products with water at temperatures 70°C, 50°C and 30°C
Highly mobile carriers in orthorhombic phases of iron-based superconductors FeSeS
The field and temperature dependencies of the longitudinal and Hall
resistivity have been measured for FeSeS (x=0.04, 0.09 and
0.19) single crystals. The sample FeSeS does not show a
transition to an orthorhombic phase and exhibits at low temperatures the
transport properties quite different from those of orthorhombic samples. The
behavior of FeSeS is well described by the simple two
band model with comparable values of hole and electron mobility. In particular,
at low temperatures the transverse resistance shows a linear field dependence,
the magnetoresistance follow a quadratic field dependence and obeys to Kohler's
rule. In contrast, Kohler's rule is strongly violated for samples having an
orthorhombic low temperature structure. However, the transport properties of
the orthorhombic samples can be satisfactory described by the three band model
with the pair of almost equivalent to the tetragonal sample hole and electron
bands, supplemented with the highly mobile electron band which has two order
smaller carrier number. Therefore, the peculiarity of the low temperature
transport properties of the orthorhombic Fe(SeS) samples, as probably of many
other orthorhombic iron superconductors, is due to the presence of a small
number of highly mobile carriers which originate from the local regions of the
Fermi surface, presumably, nearby the Van Hove singularity points
Development of virtual instrument for laboratory work in section «Electric» courses «Life safety»
Сообщается о создании виртуальных приборов, представляющих собой имитацию в среде LabVIEW V.7 и выше лабораторных приборов, для измерения, электротехнических характеристик. Приборы предназначены для выполнения лабораторных работ по курсу «Безопасность жизнедеятельности».Reported the creation of virtual instruments, which are simulated in the environment of LabVIEW V.7 and above laboratory devices for measuring electrical characteristics. The devices are designed to perform laboratory work on the course "Life Safety"
Dynamical lattice instability versus spin liquid state in a frustrated spin chain system
The low-dimensional s=1/2 compound (NO)[Cu(NO3)3] has recently been suggested
to follow the Nersesyan-Tsvelik model of coupled spin chains. Such a system
shows unbound spinon excitations and a resonating valence bond ground state due
spin frustration. Our Raman scattering study demonstrates phonon anomalies as
well as the suppression of a broad magnetic scattering continuum for
temperatures below a characteristic temperature, T<T*=100K. We interpret these
effects as evidence for a dynamical interplay of spin and lattice degrees of
freedom that might lead to a further transition into a dimerized or
structurally distorted phase at lower temperatures.Comment: 5 pages, 6 figure
Capability assessment for application of clay mixture as barrier material for irradiated zirconium alloy structure elements long-term processing for storage during decommissioning of uranium-graphite nuclear reactors
The radionuclide composition and the activity level of the irradiated zirconium alloy E110, the radionuclide immobilization strength and the retention properties of the mixed clay barrier material with respect to the radionuclides identified in the alloy were investigated to perform the safety assessment of handling structural units of zirconium alloy used for the technological channels in uranium-graphite reactors. The irradiated zirconium alloy waste contained the following activation products:{93m}Nb and the long-lived {94}Nb, {93}Zr radionuclides. Radionuclides of {60}Co, {137}Cs, {90}Sr, and actinides were also present in the alloy. In the course of the runs no leaching of niobium and zirconium isotopes from the E110 alloy was detected. Leach rates were observed merely for {60}Co and {137}Cs present in the deposits formed on the internal surface of technological channels. The radionuclides present were effectively adsorbed by the barrier material. To ensure the localization of radionuclides in case of the radionuclide migration from the irradiated zirconium alloy into the barrier material, the sorption properties were determined of the barrier material used for creating the long-term storage point for the graphite stack from uranium-graphite reactors
Magnetotransport properties of FeSe in fields up to 50T
Magnetotransport properties of the high-quality FeSe crystal, measured in a
wide temperature range and in magnetic fields up to 50 T, show the symmetry of
the main holelike and electronlike bands in this compound. In addition to the
main two bands, there is also a tiny, highly mobile, electronlike band which is
responsible for the non-linear behavior of (B) at low temperatures
and some other peculiarities of FeSe. We observe the inversion of the
temperature coeficient at a magnetic field higher than about 20 T
which is an implicit conformation of the electron-hole symmetry in the main
bands.Comment: MISM 201
Radiography of the Earth's Core and Mantle with Atmospheric Neutrinos
A measurement of the absorption of neutrinos with energies in excess of 10
TeV when traversing the Earth is capable of revealing its density distribution.
Unfortunately, the existence of beams with sufficient luminosity for the task
has been ruled out by the AMANDA South Pole neutrino telescope. In this letter
we point out that, with the advent of second-generation kilometer-scale
neutrino detectors, the idea of studying the internal structure of the Earth
may be revived using atmospheric neutrinos instead.Comment: 4 pages, LaTeX file using RevTEX4, 2 figures and 1 table included.
Matches published versio
Majority carrier type inversion in FeSe family and "doped semimetal" scheme in iron-based superconductors
The field and temperature dependencies of the longitudinal and Hall
resistivity have been studied for high-quality FeSeS (x up to
0.14) single crystals. Quasiclassical analysis of the obtained data indicates a
strong variation of the electron and hole concentrations under the studied
isovalent substitution and proximity of FeSe to the point of the majority
carrier-type inversion. On this basis, we propose a `doped semimetal' scheme
for the superconducting phase diagram of the FeSe family, which can be applied
to other iron-based superconductors. In this scheme, the two local maxima of
the superconducting temperature can be associated with the Van Hove
singularities of a simplified semi-metallic electronic structure. The
multicarrier analysis of the experimental data also reveals the presence of a
tiny and highly mobile electron band for all the samples studied. Sulfur
substitution in the studied range leads to a decrease in the number of mobile
electrons by more than ten times, from about 3\% to about 0.2\%. This behavior
may indicate a successive change of the Fermi level position relative to
singular points of the electronic structure which is consistent with the `doped
semimetal' scheme. The scattering time for mobile carriers does not depend on
impurities, which allows us to consider this group as a possible source of
unusual acoustic properties of FeSe
Features of the crystal structure and electrical properties of sodium chloride at pressure 20-50 GPa
The electrical properties of polycrystalline samples of sodium chloride are studied at direct and alternating current in a wide range of frequencies at high pressure and room temperature. Graphic analysis of the experimental data [1-3] in the view of equivalent circuits allowed us to separate the contributions to conductivity caused by grains and intergrain boundaries. Features of impedance at pressure up to 37 GPa are in good agreement with earlier data and structural changes. It is shown that in the studied materials the electrical resistance of grains is much greater than the resistance of intergrain boundaries. © 2013 Allerton Press, Inc
- …