201 research outputs found
Hearing the Moment: Measures and Models of the Perceptual Centre
The perceptual centre (P-centre) is the hypothetical specific moment at which a brief event is perceived to occur. Several P-centre models are described in the literature and the first collective implementation and rigorous evaluation of these models using a common corpus is described in this thesis, thus addressing a significant open question: which model should one use? The results indicate that none of the models reliably handles all sound types. Possibly this is because the data for model development are too sparse, because inconsistent measurement methods have been used, or because the assumptions underlying the measurement methods are untested. To address this, measurement methods are reviewed and two of them, rhythm adjustment and tap asynchrony, are evaluated alongside a new method based on the phase correction response (PCR) in a synchronized tapping task. Rhythm adjustment and the PCR method yielded consistent P-centre estimates and showed no evidence of P-centre context dependence. Moreover, the PCR method appears most time efficient for generating accurate P-centre estimates. Additionally, the magnitude of the PCR is shown to vary systematically with the onset complexity of speech sounds, which presumably reflects the perceived clarity of a sound’s P-centre.
The ideal outcome of any P-centre measurement technique is to detect the true moment of perceived event occurrence. To this end a novel P-centre measurement method, based on auditory evoked potentials, is explored as a possible objective alternative to the conventional approaches examined earlier. The results are encouraging and suggest that a neuroelectric correlate of the P-centre does exist, thus opening up a new avenue of P-centre research.
Finally, an up to date and comprehensive review of the P-centre is included, integrating recent findings and reappraising previous research. The main open questions are identified, particularly those most relevant to P-centre modelling
Kamerabasiertes Monitoring der Präsenz und Ökologie der Haselmaus
Die EinflĂĽsse von Habitatparametern und das Vorkommen anderer Arten auf die
Haselmaus sowie die Aktivitätsphasen dieser Art wurden mit Kamerafallen und
Lockmittel in isolierten StraĂźenrandhabitaten im Westen Schleswig-Holsteins
und Osten Hamburgs untersucht. Die gemittelte Anzahl von Nächten bis zum ers-
ten Nachweis betrug 5,88 (± 4,55) und Individuen wurden oft nur einmal gesichtet.
Ein Muster von drei nächtlichen Aktivitätsschüben konnte festgestellt werden. An-
wesenheit einer großen Waldfläche und Haselsträuchern sowie die Abwesenheit
von Wald- und Gelbhalsmäusen hatten einen positiven Effekt auf die Anwesenheit
von Haselmäusen an den Kamerastellen.Influences of habitat parameters and presence of other species on hazel dormou -
se presence as well as the temporal patterns of this species were investigated with
camera traps and bait in isolated roadside habitats in western Schleswig-Holstein
and eastern Hamburg. The mean number of trapping nights to first detection of the
focal species was 5.88 (± 4.55) and individuals often visited only once, but a pat-
tern of three peaks of activity during the night could be discerned. Forest size and
presence of hazel, as well as absence of wood mice and yellow-necked mice were
detected to have a positive effect on hazel dormouse presence at the camera sites
Maximising spectral efficiency in LTE cells
The efficiency with which spectrum is used in wireless communications systems
is becoming increasingly important as a result of the expected growth in traffic demand and
the finite nature of usable spectrum. Spectral efficiency, defined as throughput divided by
bandwidth, is a useful metric for evaluating the use of spectrum in wireless systems. In any
given area the achievable spectrum efficiency is impacted by the underlying user population.
This paper presents the methodology for finding the transmit power which maximises the
spectral efficiency of a LTE cell for a given user density and traffic type. The impact of
different user densities and traffic profiles on the choice of transmit power is evaluated.
Results show that the transmit power which maximise spectral efficiency decreases as the
user density and average data rate of the traffic profile increases. Two non ideal real world
scenarios which require an increase in cell spectral efficiency are also considered and a
modified user admission scheme which can increase the cell spectral efficiency is presented
and evaluated. Results showed that the spectral efficiency was improved but the maximum
improvement depended on the traffic profile and practical constraints of the LTE standard
A Novel Smart Device Student Response System For Supporting High Quality Active Learning In The Engineering And Science Disciplines
This paper proposes and presents a unique smart device student response system
(SDSRS) that allows for a more flexible input than existing classroom response
systems, such as clickers. This, in turn, allows students to respond to the lecturer with
higher quality and more relevant information and, thus, improves their active learning.
This is of particular relevance in the science and engineering disciplines where
methodology is as important, if not more so, than the final answer. The SDSRS allows
the lecturer to quickly obtain this pertinent information in real-time within the classroom
environment.
The proposed system consists of three main elements, namely a student sketch
application, a lecturer view-and-edit application and a central cloud-based service to
co-ordinate the exchange of information between the two applications. The system was
evaluated within two different engineering classrooms, with very positive feedback
obtained from both the lecturers and students involved. Details of the evaluation
process, and the feedback obtained, are presented within
Software defined radio architectures evaluation
This paper presents an performance evaluation of GNU
Radio and OSSIE, two open source Software Defined Radio
(SDR) architectures. The two architectures were compared
by running implementations of a BPSK waveform utilising a
software loopback channel on each. The upper bound full
duplex throughput was found to be around 700kbps in both
cases, though OSSIE was slightly faster than GNU Radio.
CPU and memory loads did not differ significantly
Automatic Blind Syllable Segmentation for Continuous Speech
In this paper a simple practical method for blind segmentation of continuous speech into its constituent syllables is presented. This technique which uses amplitude onset velocity and coarse spectral makeup to identify syllable boundaries is tested on a corpus of continuous speech and compared with an established segmentation algorithm. The results show substantial performance benefit using the proposed algorithm
Design implementation and evaluation of a tablet-based student response system for an engineering classroom
Student response systems (SRSs) have generated significant debate and discussion in the educational research literature in the past decade. It is well known that they offer several important advantages including encouraging student interaction, offering anonymous and instant student feedback and improving the student learning experience. While several different types of such systems exist, they nevertheless remain limited in their input capabilities. In particular, they typically only allow for multiple-choice style responses, although some devices do cater for numerical and textual input. However, most of the available SRSs do not allow for freeform input such as mathematical equations, graphical drawings or circuit diagrams. This is of particular relevance to Engineering and Science disciplines where such information is core to the student learning. The approach to solving a problem is often as important, if not more so, than the actual final answer itself. This paper presents a classroom response system that allows for freeform input and operates on any smart media device with a touch interface and that employs the Android operating system, such as everyday smart phones and tablets. The proposed system involves three different components, namely a student application that allows for sketch capabilities, a lecturer application that allows for the viewing and marking of multiple student sketches and a cloud service for the exchange of messages. In addition, this proposed system was evaluated by a class of engineering students at NUI Maynooth, the results of which are presented within
Practical Non-Uniform Channelization for Multistandard Base Stations
A Multistandard software-defined radio base station must perform non-uniform channelization of multiplexed frequency bands. Non-uniform
channelization accounts for a significant portion of the digital signal processing workload in the base station receiver and can be difficult to realize in a physical
implementation. In non-uniform channelization methods based on generalized DFT filter banks, large prototype filter orders are a significant issue for
implementation. In this paper, a multistage filter design is applied to two different non-uniform generalized DFT-based channelizers in order to reduce their filter
orders. To evaluate the approach, a TETRA and TEDS base station is used. Experimental results show that the new multistage design reduces both the number
of coefficients and operations and leads to a more feasible design and practical physical implementation
Efficient Channelization for PMR+4G and GSM Re-Farming Base Stations
Current trends in mobile communications look for a better usage of the frequency spectrum by diverging from the classic frequency bands division for each standard. Instead, sharing a same frequency band by several mobile standards has been motivated by several factors: under-utilisation of some frequency bands, better electromagnetic propagation properties and provision of new capabilities to existing standards. This new way to manage the electromagnetic spectrum has an influence in the devices which form the mobile radio interface: base stations and mobiles stations. In particular for base stations, channelization represents an important challenge. In this paper efficient channelization techniques are proposed as a practical solution for real world professional and commercial mobile communication cases where frequency bands are shared. Depending on each case, the most optimal solution is based on the application of one of these channelization techniques, or a combination of several of them
Automatic Blind Syllable Segmentation for Continuous Speech
In this paper a simple practical method for blind segmentation of continuous speech into its constituent syllables is presented. This technique which uses amplitude onset velocity and coarse spectral makeup to identify syllable boundaries is tested on a corpus of continuous speech and compared with an established segmentation algorithm. The results show substantial performance benefit using the proposed algorithm
- …