Atmometer – based irrigation scheduling system for drip – irrigated onion (Allium cepa L.)

This study was conducted to develop an atmometer-based irrigation scheduling system for drip-irrigated onion production. The study was conducted at San Agustin, San Jose City Nueva Ecija from November 2016 – March 2017. Three treatments composing of three replicates were considered in the research. Treatments 1 and 2 were based on the recorded atmometer readings with an irrigation interval of two days and five days respectively. Treatment 3 is a soil moisture-based irrigation scheduling with a management allowed deficit of 50 %. Calibration curved was obtained by comparing the atmometer readings with the estimated evapotranspiration using Modified Penman-Monteith equation. It was used in computing the crop water requirement for Treatments 1 and 2. The important parameters that used to answer the objective of the study such as plant height, crop yield, bulb weight, bulb diameter, water use and water productivity, were acquired during and after crop production. The statistical analysis used in the study was Analysis of Variance for Complete Randomized Design and paired T-test. Based on the result, Treatment 1 was highly useful in increasing water productivity without sacrificing the crop qualities

Rice Straw Geotextile As Ground Cover ForSoil Erosion Mitigation

Generally, the study aimed to mitigate soil erosion using rice straw geotextile as ground cover. Specifically, it attempted to: evaluate the effect of RSM and RSN as ground cover in mitigating soil erosion at varying slope gradients and different rainfall intensities, and; determine the relationship of slope gradient versus sediment concentration, sediment yield and quantity of soil loss at different levels of rainfall intensity. Results revealed that RSGT as ground cover greatly affected soil erosion. Under rainfall intensities of 75, 100 and 125 mm/hr, RSM had significantly lower soil loss as compared to RSN, CCN And NGC. However, RSN and CCN were comparable with each other but differ significantly with NGC.  Sediment concentration, sediment yield and soil erosion exhibited a nonlinear relationship with slope gradient. At any given level of rainfall intensity, the three indicators increased correspondingly as the slope was increased from 10 to 35o and then  declined when  the slope was further  increased from 35 to 60o. Sediment concentration best fitted (R2 = 0.977) in a quadratic model in the form of a second-degree polynomial equation: SC = 0.551 + 0.626S - 0.008S2 Likewise, observed sediment yield best fitted (R2 = 0.954) a second degree polynomial equation as expressed by a quadratic model: SY = 356.0 + 61.70S – 0.972S2 Moreover, the observed soil erosion was best modeled with R2 = 97.1% confidence by a second degree polynomial equation. The regression model is quadratic in form and is given by the equation: SE = 68.92 + 11.11S - 0.174S2. Keywords: rice straw, geotextile, ground cover, soil erosion, mitigation, rainfall simulatio

Modified photoperiods and light intensities for grow-out production of nile tilapia (O. niloticus) under indoor tank culture system

The study aimed to evaluate the effect of modified photoperiods and light intensities on grow-out production of tilapia under indoor tank culture system; specifically on water quality and on growth performance of tilapia. The study was conducted inside the greenhouse and considered two factors: photoperiod (24L:0D, 20L:4D and 16L:8D); and light intensity (40 watts m-2, 60 watts m-2 and 80 watts m-2); also, a control treatment was set-up outside the greenhouse to receive the normal environmental condition. Light manipulations inside the greenhouse were able to sustain the water quality within the desirable level for tilapia cultured in tank; while control tanks shows high water quality variation. Growth performance of tilapia cultured in tank responds positively in prolonged photoperiod at different light intensities. However, light manipulation gave insignificant difference on feed conversion ratio and survival rate compared to normal condition. Results indicated that 20-hours photoperiod and 40 watts m-2 light intensity is just enough to sustain the recommended water quality and better growth performance of the cultured tilapia in indoor tank system. It can be concluded that longer photoperiod and restrained light intensity can improved the growth performance of tilapia under indoor tank culture

Atmometer – based irrigation scheduling system for drip – irrigated onion (

This study was conducted to develop an atmometer-based irrigation scheduling system for drip-irrigated onion production. The study was conducted at San Agustin, San Jose City Nueva Ecija from November 2016 – March 2017. Three treatments composing of three replicates were considered in the research. Treatments 1 and 2 were based on the recorded atmometer readings with an irrigation interval of two days and five days respectively. Treatment 3 is a soil moisture-based irrigation scheduling with a management allowed deficit of 50 %. Calibration curved was obtained by comparing the atmometer readings with the estimated evapotranspiration using Modified Penman-Monteith equation. It was used in computing the crop water requirement for Treatments 1 and 2. The important parameters that used to answer the objective of the study such as plant height, crop yield, bulb weight, bulb diameter, water use and water productivity, were acquired during and after crop production. The statistical analysis used in the study was Analysis of Variance for Complete Randomized Design and paired T-test. Based on the result, Treatment 1 was highly useful in increasing water productivity without sacrificing the crop qualities

Modified photoperiods and light intensities for grow-out production of nile tilapia (

The study aimed to evaluate the effect of modified photoperiods and light intensities on grow-out production of tilapia under indoor tank culture system; specifically on water quality and on growth performance of tilapia. The study was conducted inside the greenhouse and considered two factors: photoperiod (24L:0D, 20L:4D and 16L:8D); and light intensity (40 watts m-2, 60 watts m-2 and 80 watts m-2); also, a control treatment was set-up outside the greenhouse to receive the normal environmental condition. Light manipulations inside the greenhouse were able to sustain the water quality within the desirable level for tilapia cultured in tank; while control tanks shows high water quality variation. Growth performance of tilapia cultured in tank responds positively in prolonged photoperiod at different light intensities. However, light manipulation gave insignificant difference on feed conversion ratio and survival rate compared to normal condition. Results indicated that 20-hours photoperiod and 40 watts m-2 light intensity is just enough to sustain the recommended water quality and better growth performance of the cultured tilapia in indoor tank system. It can be concluded that longer photoperiod and restrained light intensity can improved the growth performance of tilapia under indoor tank culture

Processing and Economic Analysis of Rain Tree (Samanea saman) Pods for Village Level Hydrous Bioethanol Production

Biofuel is one of the renewable energy sources adapted by the Philippine government in order to lessen the dependency on foreign fuel and to reduce carbon dioxide emissions. Rain tree pods were seen to be a promising source of bioethanol since it contains significant amount of fermentable sugars. The study was conducted to establish the complete procedure in processing rain tree pods for village level hydrous bioethanol production. Production processes were done for village level hydrous bioethanol production from collection, drying, storage, shredding, dilution, extraction, fermentation, and distillation. The feedstock was sundried, and moisture content was determined at a range of 20% to 26% prior to storage. Dilution ratio was 1:1.25 (1 kg of pods = 1.25 L of water) and after extraction process yielded a sugar concentration of 22 0Bx to 24 0Bx. The dilution period was three hours. After three hours of diluting the samples, the juice was extracted using extractor with a capacity of 64.10 L/hour. 150 L of rain tree pods juice was extracted and subjected to fermentation process using a village level anaerobic bioreactor. Fermentation with yeast (Saccharomyces cerevisiae) can fasten up the process, thus producing more ethanol at a shorter period of time; however, without yeast fermentation, it also produces ethanol at lower volume with slower fermentation process. Distillation of 150 L of fermented broth was done for six hours at 85 °C to 95 °C temperature (feedstock) and 74 °C to 95 °C temperature of the column head (vapor state of ethanol). The highest volume of ethanol recovered was established at with yeast fermentation at five-day duration with a value of 14.89 L and lowest actual ethanol content was found at without yeast fermentation at three-day duration having a value of 11.63 L. In general, the results suggested that rain tree pods had a very good potential as feedstock for bioethanol production. Fermentation of rain tree pods juice can be done with yeast and without yeast