21 research outputs found
Miniaturised Low-Cost Gamma Scanning Platform for Contamination Identification, Localisation and Characterisation:A New Instrument in the Decommissioning Toolkit
Formerly clandestine, abandoned and legacy nuclear facilities, whether associated with civil or military applications, represent a significant decommissioning challenge owing to the lack of knowledge surrounding the existence, location and types of radioactive material(s) that may be present. Consequently, mobile and highly deployable systems that are able to identify, spatially locate and compositionally assay contamination ahead of remedial actions are of vital importance. Deployment imposes constraints to dimensions resulting from small diameter access ports or pipes. Herein, we describe a prototype low-cost, miniaturised and rapidly deployable âcell characterisationâ gamma-ray scanning system to allow for the examination of enclosed (internal) or outdoor (external) spaces for radioactive âhot-spotsâ. The readout from the miniaturised and lead-collimated gamma-ray spectrometer, that is progressively rastered through a stepped snake motion, is combined with distance measurements derived from a single-point laser range-finder to obtain an array of measurements in order to yield a 3-dimensional point-cloud, based on a polar coordinate systemâscaled for radiation intensity. Existing as a smaller and more cost-effective platform than presently available, we are able to produce a millimetre-accurate 3D volumetric rendering of a spaceâwhether internal or external, onto which fully spectroscopic radiation intensity data can be overlain to pinpoint the exact positions at which (even low abundance) gamma-emitting materials exist
Analysis of Thermoelectric Coolers as Energy Harvesters for Low Power Embedded Applications
The growing popularity of solid state thermoelectric
devices in cooling applications has sparked an increasing diversity of
thermoelectric coolers (TECs) on the market, commonly known as
âPeltier modulesâ. They can also be used as generators, converting
a temperature difference into electric power, and opportunities are
plentiful to make use of these devices as thermoelectric generators
(TEGs) to supply energy to low power, autonomous embedded
electronic applications. Their adoption as energy harvesters in this
new domain of usage is obstructed by the complex thermoelectric
models commonly associated with TEGs. Low cost TECs for the
consumer market lack the required parameters to use the models
because they are not intended for this mode of operation, thereby
urging an alternative method to obtain electric power estimations
in specific operating conditions. The design of the test setup
implemented in this paper is specifically targeted at benchmarking
commercial, off-the-shelf TECs for use as energy harvesters in
domestic environments: applications with limited temperature
differences and space available. The usefulness is demonstrated by
testing and comparing single and multi stage TECs with different
sizes. The effect of a boost converter stage on the thermoelectric
end-to-end efficiency is also discussed
Project Gatekeeper:An entrance control system embedded radiation detection capability for security applications
Threat assessments continue to conclude that terrorist groups and individuals as well as those wanting to cause harm to society have the ambition and increasing means to acquire unconventional weapons such as improvised nuclear explosive devices and radiological disposal devices. Such assessments are given credence by public statements of intent by such groups/persons, by reports of attempts to acquire radioactive material and by law enforcement actions which have interdicted, apprehended or prevented attempts to acquire such material. As a mechanism through which to identify radioactive materials being transported on an individual’s person, this work sought to develop a detection system that is of lower-cost, reduced form-factor and more covert than existing infrastructure, while maintaining adequate sensitivity and being retrofittable into an industry standard and widely utilised Gunnebo Speed Gate system. The system developed comprised an array of six off-set Geiger–Muller detectors positioned around the gate, alongside a single scintillator detector for spectroscopy, triggered by the systems inbuilt existing IR proximity sensor. This configuration served to not only reduce the cost for such a system but also allowed for source localisation and identification to be performed. Utilising the current setup, it was possible to detect a 1 µSv/h source carried into the Speed Gate in all test scenarios, alongside locating and spectrally analysing the material in a significant number
Radiological Mapping of Post-disaster Nuclear Environments Using Fixed-wing Unmanned Aerial Systems:A Study from Chernobyl
In the immediate aftermath following a large-scale release of radioactive material into the environment, it is necessary to determine the spatial distribution of radioactivity quickly. At present, this is conducted by utilizing manned aircraft equipped with large-volume radiation detection systems. Whilst these are capable of mapping large areas quickly, they suffer from a low spatial resolution due to the operating altitude of the aircraft. They are also expensive to deploy and their manned nature means that the operators are still at risk of exposure to potentially harmful ionizing radiation. Previous studies have identified the feasibility of utilizing unmanned aerial systems (UASs) in monitoring radiation in post-disaster environments. However, the majority of these systems suffer from a limited range or are too heavy to be easily integrated into regulatory restrictions that exist on the deployment of UASs worldwide. This study presents a new radiation mapping UAS based on a lightweight (8 kg) fixed-wing unmanned aircraft and tests its suitability to mapping post-disaster radiation in the Chornobyl Exclusion Zone (CEZ). The system is capable of continuous flight for more than 1 h and can resolve small scale changes in dose-rate in high resolution (sub-20 m). It is envisaged that with some minor development, these systems could be utilized to map large areas of hazardous land without exposing a single operator to a harmful dose of ionizing radiation
Recommended from our members
Evaluation of Scintillator Detection Materials for Application within Airborne Environmental Radiation Monitoring
In response to the Fukushima Daiichi Nuclear Power Plant accident, there has occurred the unabated growth in the number of airborne platforms developed to perform radiation mappingâeach utilising various designs of a low-altitude uncrewed aerial vehicle. Alongside the associated advancements in the airborne system transporting the radiation detection payload, from the earliest radiological analyses performed using gas-filled Geiger-Muller tube detectors, modern radiation detection and mapping platforms are now based near-exclusively on solid-state scintillator detectors. With numerous varieties of such light-emitting crystalline materials now in existence, this combined desk and computational modelling study sought to evaluate the best-available detector material compatible with the requirements for low-altitude autonomous radiation detection, localisation and subsequent high spatial-resolution mapping of both naturally occurring and anthropogenically-derived radionuclides. The ideal geometry of such detector materials is also evaluated. While NaI and CsI (both elementally doped) are (and will likely remain) the mainstays of radiation detection, LaBr3 scintillation detectors were determined to possess not only a greater sensitivity to incident gamma-ray radiation, but also a far superior spectral (energy) resolution over existing and other potentially deployable detector materials. Combined with their current competitive cost, an array of three such composition cylindrical detectors were determined to provide the best means of detecting and discriminating the various incident gamma-rays
Reconfigurable and Modular Mobile Robotics Platform for Remote Experiments
In this paper a hardware and software architecture
based on a modular approach for a recon?gurable mobile robot
is developed with intended use as remote experiment. A Field
Programmable Gate Array (FPGA) was chosen as control unit for
the robot and allows the implementation of custom hardware and
software by the user. FPGA con?gurations are downloaded to the
robot using a selectable wireless interface. Users can take control
of all elementary robot hardware, and an on-system recovery
mechanism is included to ensure a fallback to a golden image in
case of errors in downloaded bit streams