3,608 research outputs found
Laser-Accelerated proton beams as diagnostics for cultural heritage
This paper introduces the first use of laser-generated proton beams as diagnostic for materials of interest in the domain of Cultural Heritage. Using laser-accelerated protons, as generated by interaction of a high-power short-pulse laser with a solid target, we can produce proton-induced X-ray emission spectroscopies (PIXE). By correctly tuning the proton flux on the sample, we are able to perform the PIXE in a single shot without provoking more damage to the sample than conventional methodologies. We verify this by experimentally irradiating materials of interest in the Cultural Heritage with laser-accelerated protons and measuring the PIXE emission. The morphological and chemical analysis of the sample before and after irradiation are compared in order to assess the damage provoked to the artifact. Montecarlo simulations confirm that the temperature in the sample stays safely below the melting point. Compared to conventional diagnostic methodologies, laser-driven PIXE has the advantage of being potentially quicker and more efficien
Laser-Generated Proton Beams for High-Precision Ultra-Fast Crystal Synthesis
We present a method for the synthesis of micro-crystals and micro-structured surfaces using laseraccelerated
protons. In this method, a solid surface material having a low melting temperature is
irradiated with very-short laser-generated protons, provoking in the ablation process thermodynamic
conditions that are between the boiling and the critical point. The intense and very quick proton energy
deposition (in the ns range) induces an explosive boiling and produces microcrystals that nucleate in a
plasma plume composed by ions and atoms detached from the laser-irradiated surface. The synthesized
particles in the plasma plume are then deposited onto a cold neighboring, non-irradiated, solid
secondary surface. We experimentally verify the synthesizing methods by depositing low-meltingmaterial
microcrystals - such as gold - onto nearby silver surfaces and modeling the proton/matter
interaction via a Monte Carlo code, confrming that we are in the above described thermodynamic
conditions. Morphological and crystallinity measurements indicate the formation of gold octahedral
crystals with dimensions around 1.2 μm, uniformly distributed onto a silver surface with dimensions
in the tens of mm2. This laser-accelerated particle based synthesis method paves the way for the
development of new material synthesis using ultrashort laser-accelerated particle beams
Design and optimization of a laser-PIXE beamline for material science applications
Multi-MeV proton beams can be generated by irradiating thin solid foils with ultra-intense (>10^18 W/cm^2) short laser pulses. Several of their characteristics, such as high bunch charge and short pulse duration, make them a complementary alternative to conventional radio frequency-based accelerators. A potential material science application is the chemical analysis of cultural heritage (CH) artifacts. The complete chemistry of the bulk material (ceramics, metals) can be retrieved through sophisticated nuclear techniques such as particle-induced X-ray emission (PIXE). Recently, the use of laser-generated proton beams was introduced as diagnostics in material science (laser-PIXE or laser-driven PIXE): Coupling laser-generated proton sources to conventional beam steering devices successfully enhances the capture and transport of the laser-accelerated beam. This leads to a reduction of the high divergence and broad energy spread at the source. The design of our hybrid beamline is composed of an energy selector, followed by permanent quadrupole magnets aiming for better control and manipulation of the final proton beam parameters. This allows tailoring both, mean proton energy and spot sizes, yet keeping the system compact. We performed a theoretical study optimizing a beamline for laser-PIXE applications. Our design enables monochromatizing the beam and shaping its final spot size. We obtain spot sizes ranging between a fraction of mm up to cm scale at a fraction of nC proton charge per shot. These results pave the way for a versatile and tunable laserPIXE at a multi-Hz repetition rate using modern commercially available laser systems
Study of high resistance inorganic coatings on graphite fibers
Coatings made of boron, silicon carbide, silica, and silica-like materials were studied to determine their ability to increase resistance of graphite fibers. The most promising results were attained by chemical vapor depositing silicon carbide on graphite fiber followed by oxidation, and drawing graphite fiber through ethyl silicate followed by appropriate heat treatments. In the silicon carbide coating studies, no degradation of the graphite fibers was observed and resistance values as high as three orders of magnitude higher than that of the uncoated fiber was attained. The strength of a composite fabricated from the coated fiber had a strength which compared favorably with those of composites prepared from uncoated fiber. For the silica-like coated fiber prepared by drawing the graphite fiber through an ethyl silicate solution followed by heating, coated fiber resistances about an order of magnitude greater than that of the uncoated fiber were attained. Composites prepared using these fibers had flexural strengths comparable with those prepared using uncoated fibers, but the shear strengths were lower
Coatings for graphite fibers
Graphite fibers released from composites during burning or an explosion caused shorting of electrical and electronic equipment. Silicon carbide, silica, silicon nitride and boron nitride were coated on graphite fibers to increase their electrical resistances. Resistances as high as three orders of magnitude higher than uncoated fiber were attained without any significant degradation of the substrate fiber. An organo-silicone approach to produce coated fibers with high electrical resistance was also used. Celion 6000 graphite fibers were coated with an organo-silicone compound, followed by hydrolysis and pyrolysis of the coating to a silica-like material. The shear and flexural strengths of composites made from high electrically resistant fibers were considerably lower than the shear and flexural strengths of composites made from the lower electrically resistant fibers. The lower shear strengths of the composites indicated that the coatings on these fibers were weaker than the coating on the fibers which were pyrolyzed at higher temperature
AFM and pulsed laser ablation methods for Cultural Heritage: application to archeometric analysis of stone artifacts
- …