Multispectral Quantum Dots-in-a-Well Infrared Detectors Using Plasmon Assisted Cavities

We present the design, fabrication, and characterization, of multi-spectral quantum dots-in-a-well (DWELL) infrared detectors, by the integration of a surface plasmon assisted resonant cavity with the infrared detector. A square lattice and rectangular lattice cavity, formed by modifying the square lattice have been used in this design. By confining the resonant mode of the cavity to detector active region, the detector responsivity and detectivity have been improved by a factor of 5. A spectral tuning of 5.5 to 7.2 μm has been observed in the peak response of the detectors, by tuning the lattice constant of the cavity. Simulations indicate the presence of two modes of absorption, which have been experimentally verified. The use of a rectangular lattice predicts highly polarization sensitive modes in x- and y-direction, which are observed in fabricated detectors. A peak detectivity of 3.1 x 10^9 cm √(Hz)/W was measured at 77 K. This design offers a cost-effective and simple method of encoding spectral and polarization information, in infrared focal plane arrays

A multi-spectral and polarization-selective surface-plasmon resonant mid-infrared detector

We demonstrate a multi-spectral polarization sensitive mid-infrared dots-in-a-well (DWELL) photodetector utilizing surface-plasmonic resonant elements, with tailorable frequency response and polarization selectivity. The resonant responsivity of the surface-plasmon detector shows an enhancement of up to 5 times that of an unpatterned control detector. As the plasmonic resonator involves only surface patterning of the top metal contact, this method is independent of light-absorbing material and can easily be integrated with current focal plane array processing for imaging applications.Comment: 8 pages, 3 figure

Increased normal incidence photocurrent in quantum dot infrared photodetectors

We have increased the ratio of s-polarization (normal incidence) to p-polarization photocurrent to 50% in a quantum dot-in-a-well based infrared photodetector form the typical s-p polarization ratio about 20%. This improvement was achieved by engineering the dot geometry and the quantum confinement via post growth capping materials of the Stranski Krastanov growth mode quantum dots (QDs). The TEM images show that the height to base ratio of shape engineered QDs was increased to 8 nm/12 nm from the control sample\u27s ratio 4 nm/17 nm. The dot geometry correlates with the polarized photocurrent measurements of the detector. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4764905

Demonstration of Bias-Controlled Algorithmic Tuning of Quantum Dots in a Well (DWELL) MidIR Detectors

The quantum-confined Stark effect in intersublevel transitions present in quantum-dots-in-a-well (DWELL) detectors gives rise to a midIR spectral response that is dependent upon the detector\u27s operational bias. The spectral responses resulting from different biases exhibit spectral shifts, albeit with significant spectral overlap. A postprocessing algorithm was developed by Sakoglu that exploited this bias-dependent spectral diversity to predict the continuous and arbitrary tunability of the DWELL detector within certain limits. This paper focuses on the experimental demonstration of the DWELL-based spectral tuning algorithm. It is shown experimentally that it is possible to reconstruct the spectral content of a target electronically without using any dispersive optical elements for tuning, thereby demonstrating a DWELL-based algorithmic spectrometer. The effects of dark current, detector temperature, and bias selection on the tuning capability are also investigated experimentally

Search for MSSM Higgs bosons decaying to μ+μ-in proton-proton collisions at √s=13TeV

A search is performed for neutral non-standard-model Higgs bosons decaying to two muons in the context of the minimal supersymmetric standard model (MSSM). Proton-proton collision data recorded by the CMS experiment at the CERN Large Hadron Collider at a center-of-mass energy of 13TeVwere used, corresponding to an integrated luminosity of 35.9fb-1. The search is sensitive to neutral Higgs bosons produced via the gluon fusion process or in association with a bbquark pair. No significant deviations from the standard model expectation are observed. Upper limits at 95% confidence level are set in the context of the mmod+hand phenomenological MSSM scenarios on the parameter tanβas a function of the mass of the pseudoscalar Aboson, in the range from 130 to 600GeV. The results are also used to set a model-independent limit on the product of the branching fraction for the decay into a muon pair and the cross section for the production of a scalar neutral boson, either via gluon fusion, or in association with bquarks, in the mass range from 130 to 1000GeV

This content has been downloaded from IOPscience. Please scroll down to see the full text. Heterogeneous metal-oxide nanowire micro-sensor array for gas sensing Heterogeneous metal-oxide nanowire micro-sensor array for gas sensing

Abstract Vanadium oxide, manganese oxide, tungsten oxide, and nickel oxide nanowires were investigated for their applicability as chemiresistive gas sensors. Nanowires have excellent surface-to-volume ratios which yield higher sensitivities than bulk materials. Sensing elements consisting of these materials were assembled in an array to create an electronic nose platform. Dielectrophoresis was used to position the nanomaterials onto a microfabricated array of electrodes, which was subsequently mounted onto a leadless chip carrier and printed circuit board for rapid testing. Samples were tested in an enclosed chamber with vapors of acetone, isopropanol, methanol, and aqueous ammonia. The change in resistance of each assembly was measured. Responses varied between nanowire compositions, each demonstrating unique and repeatable responses to different gases; this enabled direct detection of the gases from the ensemble response. Sensitivities were calculated based on the fractional resistance change in a saturated environment and ranged from 6 × 10 −4 to 2 × 10

Self-Assembly of Tensile-Strained Ge Quantum Dots on InAlAs(111)A

A recently developed growth technique enables the self-assembly of defect-free quantum dots on (111) surfaces under large tensile strains. We demonstrate the use of this approach to synthesize germanium (Ge) quantum dots on In0.52Al0.48As(111)A with \u3e3% residual tensile strain. We show that the size and areal density of the tensile-strained Ge quantum dots are readily tunable with growth conditions. We also present evidence for an unusual transition in the quantum dot growth mode from Stranski-Krastanov to Volmer-Weber as we adjust the substrate temperature. This work positions Ge quantum dots as a promising starting point for exploring the effects of tensile strain on Ge’s band structure

Photovoltaic operation in the lower atmosphere and at the surface of Venus

Low‐intensity high‐temperature (LIHT) solar cells are needed for extended photovoltaic power generation in both the lower atmosphere as well as at the surface of Venus. Double‐junction GaInP/GaAs solar cells that may be able to operate and survive, with suitable encapsulation, for several weeks on the 465°C Venus surface have been developed. These solar cells have been optimized for operation under the Venus solar spectrum, which is different from that of the Earth