Fabrication of short GaAs wet-etched mirror lasers and their complex spectral behaviour

A versatile fabrication technique for GaAs-AlGaAs wet-etched mirror lasers is presented. This technique works independently of the Al concentration in the cladding layers up to a value of 70%, and it requires four photolithography steps. Ridge waveguide lasers have been successfully processed using a double heterostructure (DHS) as well as graded index separate confinement heterostructures (GRINSCH) having different quantum-well (QW) active layers. This technique is used to fabricate short-cavity lasers in GRINSCH structures having GaAs multiple-quantum-well (MQW) or bulk active layers. Laser operation was obtained in a 29-µm-long device using a 5-QW structure. Short lasers with QW active layers show a complex spectral behavior. These lasers operate at higher current densities (~20 kA/cm2) and emit light at more than one wavelength. This implies that higher order transitions are involved which is not the case when using a bulk GaAs active layer. Besides the two peaks corresponding to the n=1 and n=2 transitions, we found an intermediate peak which corresponds presumably to the forbidden transition E1-HH

Low-loss, low-confinement GaAs-AlGaAs DQW laser diode with optical trap layer for high-power operation

A low-confinement asymmetric GaAs-AlGaAs double-quantum-well molecular-beam-epitaxy grown laser diode structure with optical trap layer is characterized, The value of the internal absorption coefficient is as low as 1.4 cm-1, while keeping the series resistance at values comparable cm with symmetrical quantum-well gradient index structures in the same material system. Uncoated devices show COD values of 35 mW/µm. If coated, this should scale to about 90 mW/µm. The threshold current density is about 1000 A/cm2 for 2-mm-long devices and a considerable part of it is probably due to recombination in the optical trap layer. Fundamental mode operation is limited to 120-180 mW for 6.5-µm-wide ridge waveguide uncoated devices and to 200-300 mW for 13.5-µm-wide ones, because of thermal waveguiding effects. These values are measured under pulsed conditions, 10 µs/l m

Using a Smartphone App and Coaching Group Sessions to Promote Residents' Reflection in the Workplace

Item does not contain fulltextPROBLEM: Reflecting on workplace-based experiences is necessary for professional development. However, residents need support to raise their awareness of valuable moments for learning and to thoughtfully analyze those learning moments afterwards. APPROACH: From October to December 2012, the authors held a multidisciplinary six-week postgraduate training module focused on general competencies. Residents were randomly assigned to one of four conditions with varying degrees of reflection support; they were offered (1) a smartphone app, (2) coaching group sessions, (3) a combination of both, or (4) neither type of support. The app allowed participants to capture in real time learning moments as a text note, audio recording, picture, or video. Coaching sessions held every two weeks aimed to deepen participants' reflection on captured learning moments. Questionnaire responses and reflection data were compared between conditions to assess the effects of the app and coaching sessions on intensity and frequency of reflection. OUTCOMES: Sixty-four residents participated. App users reflected more often, captured more learning moments, and reported greater learning progress than nonapp users. Participants who attended coaching sessions were more alert to learning moments and pursued more follow-up learning activities to improve on the general competencies. Those who received both types of support were most alert to these learning moments. NEXT STEPS: A simple mobile app for capturing learning moments shows promise as a tool to support workplace-based learning, especially when combined with coaching sessions. Future research should evaluate these tools on a broader scale and in conjunction with residents' and students' personal digital portfolios

Polarization stabilization in vertical-cavity surface-emitting lasers through asymmetric current injection

We present experimental evidence that asymmetric current injection in intracavity contacted vertical-cavity surface-emitting lasers (VCSELs) stabilizes the polarization of the emitted light. Anisotropies in the gain and loss mechanisms introduced by asymmetric current injection are considered to explain this effect. The design scheme opens perspectives to obtain actual polarization control in VCSEL