Study of Eu3+ -> Eu2+ reduction in BaAl2O4:Eu prepared in different gas atmospheres

The effect of different gas atmospheres such as H2(g), synthetic air, carbon monoxide (CO) and nitrogen (N2) on the Eu3+ → Eu2+ reduction process during the synthesis of Eu-doped BaAl2O4 was studied using synchrotron radiation. The Eu3+ → Eu2+ reduction was monitored analyzing XANES region when the sample are excited at the Eu LIII-edge. The results show that the hydrogen reducing agent are the most appropriate gas for Eu2+ stabilization in BaAl2O4 and that only a part of the Eu ions can be stabilized in the divalent state. A model of Eu reduction process, based on the incorporation of charge compensation defects, is proposed

Computer modelling of hafnium doping in lithium niobate

Lithium niobate, LiNbO3, is an important technological material with good electro-optic, acousto-optic, elasto-optic, piezoelectric and nonlinear properties. Doping LiNbO3 with hafnium, Hf has been shown to improve the resistance of the material to optical damage. Computer modelling provides a useful means of determining the properties of doped and undoped LiNbO3, including its defect chemistry, and the effect of doping on the structure. In this paper, Hf doped LiNbO3 has been modelled, and the final defect configurations are found to be consistent with experimental results

Carbothermal reduction of mill scales formed on steel billets during continuous casting

AbstractA billet is a bar made from crude steel which surface contains scales which are rich in iron oxides. This study presents the carbothermal reduction of the scales formed in steel billets. The process included the reaction of the iron oxides contents with carbon (in ratio 5:1) and annealing in a tubular furnace under argon atmosphere. The occurred reactions are discussed using thermodynamic calculations and thermal analysis which indicate a three-stage reduction process Fe3O4 ➔ FeO ➔ Fe3C ➔α-Fe with intermediate reactions at the interval temperature 960 and 1300 °C. The X-ray diffraction confirms the reduction to α-Fe with minor presence of unreacted C, magnetite and wustite. Mössbauer spectroscopy analysis was performed at room temperature where a typical sextet corresponding to the dominant α-Fe is shown as well as wustite, magnetite and cementite to a lesser extent. The magnetization measurements confirm the ferromagnetic state corresponding to the α-Fe.</jats:p

Potentiation of thrombus instability: a contributory mechanism to the effectiveness of antithrombotic medications

© The Author(s) 2018The stability of an arterial thrombus, determined by its structure and ability to resist endogenous fibrinolysis, is a major determinant of the extent of infarction that results from coronary or cerebrovascular thrombosis. There is ample evidence from both laboratory and clinical studies to suggest that in addition to inhibiting platelet aggregation, antithrombotic medications have shear-dependent effects, potentiating thrombus fragility and/or enhancing endogenous fibrinolysis. Such shear-dependent effects, potentiating the fragility of the growing thrombus and/or enhancing endogenous thrombolytic activity, likely contribute to the clinical effectiveness of such medications. It is not clear how much these effects relate to the measured inhibition of platelet aggregation in response to specific agonists. These effects are observable only with techniques that subject the growing thrombus to arterial flow and shear conditions. The effects of antithrombotic medications on thrombus stability and ways of assessing this are reviewed herein, and it is proposed that thrombus stability could become a new target for pharmacological intervention.Peer reviewedFinal Published versio

Characterization of steel billet scales generated during the continuous casting process in SIDERPERU steel plant

AbstractTons of waste is produced during iron steel’s industrial production, creating environmental pollution. This work aims to characterize the steel scale formed on the billet surface during the last step of steel production in the SIDERPERU steel plant. Scanning Electron Microscopy (SEM) shows stacked layers one above the other on steel billets scales surface. Energy Dispersive X-ray (EDX) and X-ray Fluorescence (XRF) reveal the high content of Fe and O, with Ca, Si, Mn, and Cr as minority elemental compounds. X-ray Diffraction (XRD) shows FeO, α-Fe2O3 and Fe3O4 as crystallographic phases. Magnetometry reveals Verwey transition and paramagnetic signals that screen the Morin transition. Mössbauer Spectroscopy at room temperature displays magnetic and non-magnetic parts. The non-magnetic part has the hyperfine parameters corresponding to predominant nonstoichiometric wustite. Octahedral (Fe+2/Fe3+) and tetrahedral Fe+3 hyperfine fields of 46.0 and 49.4 T values respectively are associated to nonstoichiometric magnetite and another sextet with a hyperfine field of 52.0 T is related to hematite.</jats:p

Genomic characteristics and clinical effect of the emergent SARS-CoV-2 B.1.1.7 lineage in London, UK: a whole-genome sequencing and hospital-based cohort study

BACKGROUND: Emergence of variants with specific mutations in key epitopes in the spike protein of SARS-CoV-2 raises concerns pertinent to mass vaccination campaigns and use of monoclonal antibodies. We aimed to describe the emergence of the B.1.1.7 variant of concern (VOC), including virological characteristics and clinical severity in contemporaneous patients with and without the variant. METHODS: In this cohort study, samples positive for SARS-CoV-2 on PCR that were collected from Nov 9, 2020, for patients acutely admitted to one of two hospitals on or before Dec 20, 2020, in London, UK, were sequenced and analysed for the presence of VOC-defining mutations. We fitted Poisson regression models to investigate the association between B.1.1.7 infection and severe disease (defined as point 6 or higher on the WHO ordinal scale within 14 days of symptoms or positive test) and death within 28 days of a positive test and did supplementary genomic analyses in a cohort of chronically shedding patients and in a cohort of remdesivir-treated patients. Viral load was compared by proxy, using PCR cycle threshold values and sequencing read depths. FINDINGS: Of 496 patients with samples positive for SARS-CoV-2 on PCR and who met inclusion criteria, 341 had samples that could be sequenced. 198 (58%) of 341 had B.1.1.7 infection and 143 (42%) had non-B.1.1.7 infection. We found no evidence of an association between severe disease and death and lineage (B.1.1.7 vs non-B.1.1.7) in unadjusted analyses (prevalence ratio [PR] 0·97 [95% CI 0·72-1·31]), or in analyses adjusted for hospital, sex, age, comorbidities, and ethnicity (adjusted PR 1·02 [0·76-1·38]). We detected no B.1.1.7 VOC-defining mutations in 123 chronically shedding immunocompromised patients or in 32 remdesivir-treated patients. Viral load by proxy was higher in B.1.1.7 samples than in non-B.1.1.7 samples, as measured by cycle threshold value (mean 28·8 [SD 4·7] vs 32·0 [4·8]; p=0·0085) and genomic read depth (1280 [1004] vs 831 [682]; p=0·0011). INTERPRETATION: Emerging evidence exists of increased transmissibility of B.1.1.7, and we found increased virus load by proxy for B.1.1.7 in our data. We did not identify an association of the variant with severe disease in this hospitalised cohort. FUNDING: University College London Hospitals NHS Trust, University College London/University College London Hospitals NIHR Biomedical Research Centre, Engineering and Physical Sciences Research Council

Mapping biomass with remote sensing: a comparison of methods for the case study of Uganda

<p>Abstract</p> <p>Background</p> <p>Assessing biomass is gaining increasing interest mainly for bioenergy, climate change research and mitigation activities, such as reducing emissions from deforestation and forest degradation and the role of conservation, sustainable management of forests and enhancement of forest carbon stocks in developing countries (REDD+). In response to these needs, a number of biomass/carbon maps have been recently produced using different approaches but the lack of comparable reference data limits their proper validation. The objectives of this study are to compare the available maps for Uganda and to understand the sources of variability in the estimation. Uganda was chosen as a case-study because it presents a reliable national biomass reference dataset.</p> <p>Results</p> <p>The comparison of the biomass/carbon maps show strong disagreement between the products, with estimates of total aboveground biomass of Uganda ranging from 343 to 2201 Tg and different spatial distribution patterns. Compared to the reference map based on country-specific field data and a national Land Cover (LC) dataset (estimating 468 Tg), maps based on biome-average biomass values, such as the Intergovernmental Panel on Climate Change (IPCC) default values, and global LC datasets tend to strongly overestimate biomass availability of Uganda (ranging from 578 to 2201 Tg), while maps based on satellite data and regression models provide conservative estimates (ranging from 343 to 443 Tg). The comparison of the maps predictions with field data, upscaled to map resolution using LC data, is in accordance with the above findings. This study also demonstrates that the biomass estimates are primarily driven by the biomass reference data while the type of spatial maps used for their stratification has a smaller, but not negligible, impact. The differences in format, resolution and biomass definition used by the maps, as well as the fact that some datasets are not independent from the reference data to which they are compared, are considered in the interpretation of the results.</p> <p>Conclusions</p> <p>The strong disagreement between existing products and the large impact of biomass reference data on the estimates indicate that the first, critical step to improve the accuracy of the biomass maps consists of the collection of accurate biomass field data for all relevant vegetation types. However, detailed and accurate spatial datasets are crucial to obtain accurate estimates at specific locations.</p

Carbothermal reduction of mill scales formed on steel billets during continuous casting

AbstractA billet is a bar made from crude steel which surface contains scales which are rich in iron oxides. This study presents the carbothermal reduction of the scales formed in steel billets. The process included the reaction of the iron oxides contents with carbon (in ratio 5:1) and annealing in a tubular furnace under argon atmosphere. The occurred reactions are discussed using thermodynamic calculations and thermal analysis which indicate a three-stage reduction process Fe3O4 ➔ FeO ➔ Fe3C ➔α-Fe with intermediate reactions at the interval temperature 960 and 1300 °C. The X-ray diffraction confirms the reduction to α-Fe with minor presence of unreacted C, magnetite and wustite. Mössbauer spectroscopy analysis was performed at room temperature where a typical sextet corresponding to the dominant α-Fe is shown as well as wustite, magnetite and cementite to a lesser extent. The magnetization measurements confirm the ferromagnetic state corresponding to the α-Fe.</jats:p