Wetlands for wastewater treatment and subsequent recycling of treated effluent : a review

Due to water scarcity challenges around the world, it is essential to think about non-conventional water resources to address the increased demand in clean freshwater. Environmental and public health problems may result from insufficient provision of sanitation and wastewater disposal facilities. Because of this, wastewater treatment and recycling methods will be vital to provide sufficient freshwater in the coming decades, since water resources are limited and more than 70% of water are consumed for irrigation purposes. Therefore, the application of treated wastewater for agricultural irrigation has much potential, especially when incorporating the reuse of nutrients like nitrogen and phosphorous, which are essential for plant production. Among the current treatment technologies applied in urban wastewater reuse for irrigation, wetlands were concluded to be the one of the most suitable ones in terms of pollutant removal and have advantages due to both low maintenance costs and required energy. Wetland behavior and efficiency concerning wastewater treatment is mainly linked to macrophyte composition, substrate, hydrology, surface loading rate, influent feeding mode, microorganism availability, and temperature. Constructed wetlands are very effective in removing organics and suspended solids, whereas the removal of nitrogen is relatively low, but could be improved by using a combination of various types of constructed wetlands meeting the irrigation reuse standards. The removal of phosphorus is usually low, unless special media with high sorption capacity are used. Pathogen removal from wetland effluent to meet irrigation reuse standards is a challenge unless supplementary lagoons or hybrid wetland systems are used

Modelling runoff quantity and quality in tropical urban catchments using storm water management model

Due to differences in rainfall regimes and management practices, tropical urban catchments are expected to behave differently from temperate catchments in terms of pollutant sources and their transport mechanism. Storm Water Management Model (SWMM) was applied to simulate runoff quantity (peakflow and runoff depth) and quality (total suspended solids and total phosphorous) in residential, commercial and industrial catchments. For each catchment, the model was calibrated using 8-10 storm events and validated using seven new events. The model performance was evaluated based on the relative error, normalized objective function, Nash-Sutcliffe coefficient and 1:1 plots between the simulated and observed values. The calibration and validation results showed good agreement between simulated and measured data. Application of Storm Water Management Model for predicting runoff quantity has been improved by taking into account catchment's antecedent moisture condition. The impervious depression storages obtained for dry and wet conditions were 0. 8 and 0. 2 mm, respectively. The locally derived build-up and wash-off parameters were used for modelling runoff quality