On the Analysis of Chemical Composition of Moon's Surface by Direct Methods

Proportional counter for X ray emission detection and chemical analysis of lunar surface element

Dynamics of a class A nonlinear mirror mode-locked laser

Using a delay differential equation model we study theoretically the dynamics of a unidirectional class-A ring laser with a nonlinear amplifying loop mirror. We perform linear stability analysis of the CW regimes in the large delay limit and demonstrate that these regimes can be destabilized via modulational and Turing-type instabilities, as well as by an instability leading to the appearance of square-waves. We investigate the formation of square-waves and mode-locked pulses in the system. We show that mode-locked pulses are asymmetric with exponential decay of the trailing edge in positive time and faster-than-exponential (super-exponential) decay of the leading edge in negative time. We discuss asymmetric interaction of these pulses leading to a formation of harmonic mode-locked regimes.Comment: 9 pages

An aerostatic pad with an internal pressure control

Because of their almost zero friction and wear, aerostatic pads are widely used in applications where very precise positioning is required. However, this kind of bearing suffers from poor damping and low specific stiffness. This paper presents a new compensation strategy to increase air pad stiffness. This method exploits a custom-built pneumatic valve which can be easily integrated with any commercial pad. The design and the working principle of the proposed system are described and studied with the aid of a lumped parameter model. The effectiveness of the proposed compensation is numerically and experimentally evaluated. The results demonstrate that the solution represents a good and cost-effective method to enhance the static stiffness of aerostatic pads

Unbalance Response Analysis of a Spindle Supported on Gas Bearings: A Comparison between Different Approaches

Gas journal bearings are widely employed in high-speed spindles for the micromachining industry. Compared to their oil and rolling counterparts, gas bearings have a longer life span, lower friction and a lower level of noise. In order to design accurate high-speed spindles supported by externally pressurized gas bearings, it is vital to analyze the characteristics of rotor bearing systems. In this paper, we present an analysis of the unbalance response of a high-speed spindle supported by gas journal bearings. A number of aspects to enhance the accuracy of the system are discussed. We performed the analysis by considering a nonlinear and a linearized numerical model validated through experimental measurements

On the Design of a Diaphragm Valve for Aerostatic Bearings

Because of their almost zero friction, cleanness and long life, aerostatic bearings are commonly used in many applications where high precision of positioning is required, e.g. machine tools, measuring machines, semiconductor manufacturing and power board testing. However, air bearings suffer from low relative stiffness and poor damping. Active and passive compensation are two effective methods to enhance the static and dynamic performance of these kinds of bearings. Despite their higher performance, active compensation solutions are too expensive to be used in industrial applications, as a consequence of the costs related to their controllers, actuators and sensors. This paper presents the design and performance of a passive compensation method that exploits a diaphragm valve. Thanks to its ease of integration, satisfactory performance and relatively low cost, this method could be a valuable solution to increasing the stiffness of aerostatic bearings. This work provides a procedure to design diaphragm valves depending on the type of the integrated pad and the desired nominal air gap height. Results demonstrate that, once correctly designed, the diaphragm valve makes it possible to obtain bearings with quasi-static infinite stiffness at the selected air gap height

Air Pad Controlled by Means of a Diaphragm-Valve: Static and Dynamic Behaviour

This paper presents the analysis of the static and dynamic performance of a passively compensated air pad. The proposed method consists in the integration of a custom-built diaphragm valve and a commercial aerostatic pad. A lumped model is used to simulate the static and dynamic performance of the pad. Results demonstrate that the proposed method is very effective when the system works with excitation frequencies below 10 Hz