Rapid quantification of low level polymorph content in a solid dose form using transmission Raman spectroscopy

This proof of concept study demonstrates the application of transmission Raman spectroscopy (TRS) to the non-invasive and non-destructive quantification of low levels (0.62-1.32% w/w) of an active pharmaceutical ingredient's polymorphic forms in a pharmaceutical formulation. Partial least squares calibration models were validated with independent validation samples resulting in prediction RMSEP values of 0.03-0.05% w/w and a limit of detection of 0.1-0.2% w/w. The study further demonstrates the ability of TRS to quantify all tablet constituents in one single measurement. By analysis of degraded stability samples, sole transformation between polymorphic forms was observed while excipient levels remained constant. Additionally, a beam enhancer device was used to enhance laser coupling to the sample, which allowed comparable prediction performance at 60 times faster rates (0.2 s) than in standard mode

Variation in structure and properties of poly(glycerol adipate) via control of chain branching during enzymatic synthesis

Poly (glycerol adipate) (PGA) can be produced from divinyl adipate and unprotected glycerol by an enzymatic route to generate a polymer with relatively low molar mass (12 kDa). PGA bears a pendant hydroxyl group which imparts a hydrophilic character to this water insoluble polymer. We have examined the effect of synthesis temperature on polymer characteristics through various techniques including FT-IR, 1H and 13C NMR, surface and thermal analysis, both to expand the data already present in the literature about this material and to understand better its properties for potential pharmaceutical applications. The use of a lipase (Novozym 435) as a catalyst suppresses cross-linking at the pendant glyceryl hydroxyl through steric hindrance at the active site, thus producing polymers with low degrees of branching (5–30%), and removes the need for any pre- or post-polymerization protection/deprotection reactions. Careful temperature control during synthesis can give polymers with reproducible molecular weights and reduced amounts of polymer branching compared to synthesis at higher temperatures. Due to the ability of the synthetic route to produce a range of structures, PGA generated by enzymatic routes may emerge as a useful biodegradable polymer platform to engineer solid dispersions or nanoparticles for healthcare applications

A facile one step route that introduces functionality to polymer powders for laser sintering

Laser Sintering (LS) is a type of Additive Manufacturing (AM) exploiting laser processing of polymeric particles to produce 3D objects. Because of its ease of processability and thermo-physical properties, polyamide-12 (PA-12) represents ~95% of the polymeric materials used in LS. This constrains the functionality of the items produced, including limited available colours. Moreover, PA-12 objects tend to biofoul in wet environments. Therefore, a key challenge is to develop an inexpensive route to introduce desirable functionality to PA-12. We report a facile, clean, and scalable approach to modification of PA-12, exploiting supercritical carbon dioxide (scCO2) and free radical polymerizations to yield functionalised PA-12 materials. These can be easily printed using commercial apparatus. We demonstrate the potential by creating coloured PA-12 materials and show that the same approach can be utilized to create anti-biofouling objects. Our approach to functionalise materials could open significant new applications for AM

Synergistic activity between an antimicrobial polyacrylamide and daptomycin versus Staphylococcus aureus biofilm

Antibiotic resistance of bacteria growing in biofilms compared to their planktonic counterparts enhances the difficulty to eradicate biofilm-associated infections. In the last decade, combination antibiotic therapy has emerged as an attractive strategy for treating biofilm infections, even if in most of tolerant biofilms the optimal combinations are still unknown. In this study, an antimicrobial cationic polyacrylamide was used in combination with daptomycin or moxifloxacin against mature biofilms of Staphylococcus aureus clinical isolates to examine a possible improvement of the antibiofilm activity of the two antibiotics. The polymer did not have an effect on moxifloxacin but significantly increased the antibiofilm efficacy of daptomycin. These findings are presumably related to the different mechanism of action of the two drugs. In summary, our data highlighted the ability of polycations to increase daptomycin antibiofilm activity providing a potential strategy to eradicate biofilms in industrial or medical settings

Synthesis and Antibacterial Evaluation of New Pyrazolo[3,4-d]pyrimidines Kinase Inhibitors

Pyrazolo[3,4-d]pyrimidines represent an important class of heterocyclic compounds well-known for their anticancer activity exerted by the inhibition of eukaryotic protein kinases. Recently, pyrazolo[3,4-d]pyrimidines have become increasingly attractive for their potential antimicrobial properties. Here, we explored the activity of a library of in-house pyrazolo[3,4-d]pyrimidines, targeting human protein kinases, against Staphylococcus aureus and Escherichia coli and their interaction with ampicillin and kanamycin, representing important classes of clinically used antibiotics. Our results represent a first step towards the potential application of dual active pyrazolo[3,4-d]pyrimidine kinase inhibitors in the prevention and treatment of bacterial infections in cancer patients

Antifouling polyurethanes to fight device-related staphylococcal infections: synthesis, characterization and antibiofilm efficacy

In hospital settings, biofilm-based medical device-related infections are considered a threat to patients, the sessile growing bacteria playing a key role in the spreading of healthcare-associated infections. In last decades, the design of antifouling coatings for medical devices able to prevent microbial adhesiveness has emerged as one of the most promising strategies to face this important issue. In order to obtain suitable antifouling materials, segmented polyurethanes characterized by a hard/soft domain structure, having the same hard domain but a variable soft domain, have been synthesized. The soft domain was constituted by one of the following macrodiols: polypropylenoxide (PPO), polycaprolactide (PCL) and poly-l-lactide (PLA). The effects of the polymer hydrophilicity and the degree of hard/soft domain separation on antifouling properties of the synthesized polyurethanes were investigated. Microbial adherence assays evidenced as the polymers containing PCL or PLA were able to significantly reduce the adhesion of Staphylococcus epidermidis with respect to the PPO-containing polymer

Amylose/cellulose nanofiber composites for all-natural, fully biodegradable and flexible bioplastics

Thermoplastic, polysaccharide-based plastics are environmentally friendly. However, typical shortcomings include lack of water resistance and poor mechanical properties. Nanocomposite manufacturing using pure, highly linear, polysaccharides can overcome such limitations. Cast nanocomposites were fabricated with plant engineered pure amylose (AM), produced in bulk quantity in transgenic barley grain, and cellulose nanofibers (CNF), extracted from agrowaste sugar beet pulp. Morphology, crystallinity, chemical heterogeneity, mechanics, dynamic mechanical, gas and water permeability, and contact angle of the films were investigated. Blending CNF into the AM matrix significantly enhanced the crystallinity, mechanical properties and permeability, whereas glycerol increased elongation at break, mainly by plasticizing the AM. There was significant phase separation between AM and CNF. Dynamic plasticizing and anti-plasticizing effects of both CNF and glycerol were demonstrated by NMR demonstrating high molecular order, but also non-crystalline, and evenly distributed 20 nm-sized glycerol domains. This study demonstrates a new lead in functional polysaccharide-based bioplastic systems