Blue biotechnology: oil bioremediation using hydrocarbon-degrading bacteria immobilized on biodegradable membranes

A novel bioremediation system to clean up oil contaminated water was developed combining hydrocarbon (HC) degrading bacteria immobilized and polylactic acid (PLA) or polycaprolactone (PCL) membranes prepared by electrospinning. The bioremediation efficiency was tested on crude oil using highly performant HC degrading bacterial strains isolated from marine and soil environments. The membrane morphology, the microbial adhesion and proliferation were evaluated using scanning electron microscopy (SEM). The SEM analysis highlighted that the fibers of the electrospun mats were in nanoscale with a similar diameter size distribution. The electrospun membranes exhibited high oil absorption capacity (q): approximately q = 40 g/g for PLA and q = 20 g/g for PCL. The bacterial strains were able to attach to the PLA and PCL membranes after 48h, reaching high proliferation and biofilm formation within the whole structure in 5 days. The biodegradation efficiency of the bacteria-membrane systems was tested by GC-FID analysis and compared with planktonic cells after 5 and 10 days incubation. The bacterial immobilization is a promoting factor for biodegradation and a new tool to be developed for bioremediation of aquatic systems

Solution-based processing for scaffold fabrication in tissue engineering applications: A brief review

The fabrication of 3D scaffolds is under wide investigation in tissue engineering (TE) because of its incessant development of new advanced technologies and the improvement of traditional processes. Currently, scientific and clinical research focuses on scaffold characterization to restore the function of missing or damaged tissues. A key for suitable scaffold production is the guarantee of an interconnected porous structure that allows the cells to grow as in native tissue. The fabrication techniques should meet the appropriate requirements, including feasible reproducibility and time-and cost-effective assets. This is necessary for easy processability, which is associated with the large range of biomaterials supporting the use of fabrication technologies. This paper presents a review of scaffold fabrication methods starting from polymer solutions that provide highly porous structures under controlled process parameters. In this review, general information of solution-based technologies, including freeze-drying, thermally or diffusion induced phase separation (TIPS or DIPS), and electrospinning, are presented, along with an overview of their technological strategies and applications. Furthermore, the differences in the fabricated constructs in terms of pore size and distribution, porosity, morphology, and mechanical and biological properties, are clarified and critically reviewed. Then, the combination of these techniques for obtaining scaffolds is described, offering the advantages of mimicking the unique architecture of tissues and organs that are intrinsically difficult to design

Productive performance and histological features of intestinal mucosa of broiler chickens fed different dietary protein levels

ABSTRACT To evaluate the effect of decreasing dietary protein on growth performance, carcass traits, and intestinal mucosal morphometry, 180 female Hubbard strain broiler chickens were divided into 3 groups and fed 3 isoenergetic diets ad libitum from 14 d of age until slaughter age (49 d). The treatments varied according to 3 protein levels: high-protein diet (HiP, 22.5% CP, DM basis), medium-protein diet (MedP, 20.5% CP), and low-protein diet (LowP, 18.5%). Diets were obtained by replacing wheat middlings with soybean meal and were formulated to meet or exceed broiler amino acid requirements of the NRC. Morphometric indices of duodenum, jejunum, and ileum were measured at the end of the feeding period and included villus height, crypt depth, villus-to-crypt ratio, and apparent villus surface area. The dietary protein level had a significant effect on final BW of birds, whereas ADG, ADFI, and feed efficiency remained unaffected by dietary treatment. The muscle (breast and drumstick) yields were significantly higher in birds fed the HiP diet compared with those of the MedP and LowP diets. Meat quality traits were not affected by the protein level. The villus surface area of all intestinal segments did not change among groups. Instead, reducing the dietary protein level to 20.5% resulted in a higher villus height and villus height to crypt depth ratio in the duodenum and ileum. On the basis of our findings, even if the high-protein diet promoted meat yield, a medium-protein diet could positively support broiler growth performance, as confirmed by favorable morphometric features of the intestine

Blue biotechnology: enhancement of bioremediation using bacterial biofilms on biodegradable scaffolds

Petroleum hydrocarbons are still the most threatening environmental pollutants. A promising non invasive and low-cost technology for the treatment of contaminated sites is based on bioremediation by biodegrading microorganism endowed with catabolic ability towards oil and derivatives. New methods are needed to enhance and optimize natural biodegradation, such as the immobilization of hydrocarbons degraders in many types of supports. We developed a scaffold-bacteria bioremediation system to clean up oil contamination based on degradable 3D scaffolds. The polycaprolactone component is biodegradable, produced in the melt, i.e. at low cost and without the use of toxic solvents. The biofilm is made of highly performing HC-degrading bacteria such as the marine hydrocarbonoclastic bacteria (HCB) (1) or solid n-alkane degrading Actinobacteria (2, 3). The bacterial biofilm is observed within the whole structure of scaffold using scanning electron microscopy. The bioremediation efficiency of such systems was tested on crude oil by GC-FID analysis and compared whit planktonic cells. The biofilms formation was a promoting factor for biodegradation showing hydrocarbon removal up to 70% and 15% more in respect to the planktonic cells. Increasing availability of the contaminants and a better interaction between the hydrophobic substrate and the bacterial cells resulted in developing the degradation rate. Biofilm-mediated bioremediation is a new tool to be developed for bioremediation of acquatic system

Use of biochar as filler for biocomposite blown films: Structure-processing-properties relationships

In this work, biocomposite blown films based on poly(butylene adipate-co-terephthalate) (PBAT) as biopolymeric matrix and biochar (BC) as filler were successfully fabricated. The materials were subjected to a film-blowing process after being compounded in a twin-screw extruder. The preliminary investigations conducted on melt-mixed PBAT/BC composites allowed PBAT/BC 5% and PBAT/BC 10% to be identified as the most appropriate formulations to be processed via film blowing. The blown films exhibited mechanical performances adequate for possible application as film for packaging, agricultural, and compost bags. The addition of BC led to an improvement of the elastic modulus, still maintaining high values of deformation. Water contact angle measurements revealed an increase in the hydrophobic behavior of the biocomposite films compared to PBAT. Additionally, accelerated degradative tests monitored by tensile tests and spectroscopic analysis revealed that the filler induced a photo-oxidative resistance on PBAT by delaying the degradation phenomena

Physical and biological properties of electrospun poly(d,l-lactide)/nanoclay and poly(d,l-lactide)/nanosilica nanofibrous scaffold for bone tissue engineering

Electrospun scaffolds exhibiting high physical performances with the ability to support cell attachment and proliferation are attracting more and more scientific interest for tissue engineering applications. The inclusion of inorganic nanoparticles such as nanosilica and nanoclay into electrospun biopolymeric matrices can meet these challenging requirements. The silica and clay incorporation into polymeric nanofibers has been reported to enhance and improve the mechanical properties as well as the osteogenic properties of the scaffolds. In this work, for the first time, the physical and biological properties of polylactic acid (PLA) electrospun mats filled with different concentrations of nanosilica and nanoclay were evaluated and compared. The inclusion of the particles was evaluated through morphological investigations and Fourier transform infrared spectroscopy. The morphology of nanofibers was differently affected by the amount and kind of fillers and it was correlated to the viscosity of the polymeric suspensions. The wettability of the scaffolds, evaluated through wet contact angle measurements, slightly increased for both the nanocomposites. The crystallinity of the systems was investigated by differential scanning calorimetry highlighting the nucleating action of both nanosilica and nanoclay on PLA. Scaffolds were mechanically characterized with tensile tests to evaluate the reinforcing action of the fillers. Finally, cell culture assays with pre-osteoblastic cells were conducted on a selected composite scaffold in order to compare the cell proliferation and morphology with that of neat PLA scaffolds. Based on the results, we can convince that nanosilica and nanoclay can be both considered great potential fillers for electrospun systems engineered for bone tissue regeneration

Engineered membranes for residual cell trapping on microfluidic blood plasma separation systems. A comparison between porous and nanofibrous membranes

Blood-based clinical diagnostics require challenging limit-of-detection for low abundance, circulating molecules in plasma. Micro-scale blood plasma separation (BPS) has achieved remarka-ble results in terms of plasma yield or purity, but rarely achieving both at the same time. Here, we proposed the first use of electrospun polylactic-acid (PLA) membranes as filters to remove residual cell population from continuous hydrodynamic-BPS devices. The membranes hydrophilicity was improved by adopting a wet chemistry approach via surface aminolysis as demonstrated through Fourier Transform Infrared Spectroscopy and Water Contact Angle analysis. The usability of PLA-membranes was assessed through degradation measurements at extreme pH values. Plasma purity and hemolysis were evaluated on plasma samples with residual red blood cell content (1, 3, 5% hematocrit) corresponding to output from existing hydrodynamic BPS systems. Commercially available membranes for BPS were used as benchmark. Results highlighted that the electrospun membranes are suitable for downstream residual cell removal from blood, permitting the collection of up to 2 mL of pure and low-hemolyzed plasma. Fluorometric DNA quantification revealed that electrospun membranes did not significantly affect the concentration of circulating DNA. PLA-based electrospun membranes can be combined with hydrodynamic BPS in order to achieve high volume plasma separation at over 99% plasma purity