Highly Functionalized SWCNTs with a Dopamine Derivative as a Support for Pd Nanoparticles: A Recyclable Catalyst for the Reduction of Nitro Compounds and the Heck Reaction

Single-walled carbon nanotubes (SWCNTs) were functionalized with a dopamine derivative in which the amine group was converted to azide (dopamine azide). The direct reaction of SWCNTs and dopamine azide in o-dichlorobenzene at high temperature (160 °C) led to very highly functionalized CNTs (≈60 wt.%). Surprisingly, despite this high degree of functionalization, Raman spectroscopy detected a low disruption of the π-network of the carbonaceous support. This finding was justified by the rehybridization from sp3 to sp2 of the sidewall carbon atoms of CNTs involved in the functionalization process. Further characterization by means of different techniques such as X-ray photoelectron spectroscopy (XPS) analysis and transmission electron microscopy (TEM) allowed to shed some light on the chemical composition and morphology of the obtained material. Moreover, the estimation of the total content of phenolic units and their reducing potential after CNTs functionalization was also assessed using Folin and Ciocalteu and 2,2-diphenyl-1-picryl hydrazide (DPPH) assays. The functionalization of CNTs was exploited to immobilize palladium(II) species that were subsequently reduced with NaBH4 leading to the formation of Pd nanoparticles (NPs). The so obtained hybrid material was used as a recyclable heterogeneous catalyst for the reduction of nitro compounds and the Heck reaction

Highly cross-linked bifunctional magnesium porphyrin-imidazolium bromide polymer: Unveiling the key role of co-catalysts proximity for CO2 conversion into cyclic carbonates

Highly cross-linked materials containing an imidazolium salt and magnesium porphyrin, either in the absence (TSP-Mg-imi) or in the presence (7a and 7b) of multi-walled carbon nanotubes (MWCNTs), were synthesized and used as heterogeneous bifunctional catalysts for the conversion of CO2 into cyclic carbonates. The metalloporphyrin moiety acts both as a “covalent swelling agent”, generating hybrids with high surface area, and as a Lewis acid co-catalytic species. TSP-Mg-imi produced excellent conversion and TONMg values, under solvent-free conditions, even at room temperature and with low catalytic loading (0.003 mol%). In terms of conversion and TONMg, TSP-Mg-imi exhibited better catalytic performance compared to a reference homogeneous system, demonstrating that the proximity between the metal centers and the nucleophilic site results in a synergistic effect during the catalytic cycle. The results of the computational study confirmed both the cooperative function and the significance of incorporating a co-catalytic species into the system

First Evidence of Tris(catecholato)silicate Formation from Hydrolysis of an Alkyl Bis(catecholato)silicate

The hydrolysis of 3-ammoniumpropylbis(catecholato)silicate 1, giving two different silica-based materials containing different amounts of tris(catecholato)silicate, is reported. The latter species can be formed through an attack of catechol to the silicon atom in the pentacoordinate complex, in which the silicon-carbon bond is further activated toward electrophilic proton cleavage. The Knoevenagel reaction was used as a probe in order to test the availability of functional groups on the surface of such materials

Templating effect of carbon nanoforms on highly cross-linked imidazolium network: Catalytic activity of the resulting hybrids with Pd nanoparticles

Two different carbon nanoforms (CNFs), namely multi-walled carbon nanotubes (MWCNTs) and carbon nanohorns (CNHs), have been chosen as support for the direct polymerization of a bis-vinylimidazolium salt. Transmission electron microscopy analyses revealed a templating effect of the CNFs on the growth of the polymeric network, which perfectly covers their whole surfaces creating a cylindrical or spherical coating for MWCNTs and CNHs, respectively. Subsequently, the CNFs-polyimidazolium have been used as stabilizers for Pd nanoparticles (Pd NPs), and the obtained materials have been characterized by means of analytical and spectroscopic techniques and then employed as easily recoverable and recyclable catalysts for Suzuki and Heck reactions. Quantitative conversions have been obtained in almost all the explored reactions, even employing low loading of catalyst (down to 0.007 mol%). Suzuki reactions were carried out in pure water under aerobic conditions. Both materials showed excellent activity and recyclability for the investigated C-C coupling reactions, with the CNHs-based material resulting slightly more active than the MWCNTs-based one due to a higher superficial exposure of Pd NPs

A study on the stability of carbon nanoforms–polyimidazolium network hybrids in the conversion of co2 into cyclic carbonates: Increase in catalytic activity after reuse

Three different carbon nanoforms (CNFs), single-walled and multi-walled carbon nanotubes (SWCNTs, MWCNTs) and carbon nanohorns (CNHs), have been used as supports for the direct polymerization of variable amounts of a bis-vinylimidazolium salt. Transmission electron microscopy confirmed that all CNFs act as templates on the growth of the polymeric network, which perfectly covers the nanocarbons forming a cylindrical (SWCNTs, MWCNTs) or spherical (CNHs) coating. The stability of these hybrid materials was investigated in the conversion of CO2 into cyclic carbonate under high temperature and CO2 pressure. Compared with the homopolymerized monomer, nanotube-based materials display an improved catalytic activity. Beside the low catalytic loading (0.05–0.09 mol%) and the absence of Lewis acid co-catalysts, all the materials showed high TON values (up to 1154 for epichlorohydrin with SW-1:2). Interestingly, despite the loss of part of the polymeric coating for crumbling or peeling, the activity increases upon recycling of the materials, and this behaviour was ascribed to their change in morphology, which led to materials with higher surface areas and with more accessible catalytic sites. Transmission electron microscopy analysis, along with different experiments, have been carried out in order to elucidate these findings

New Mussel Inspired Polydopamine-Like Silica-Based Material for Dye Adsorption

A straightforward and economic procedure has been developed for the synthesis of a new polydopamine-like silica-based material that has been obtained by oxidation of catechol with KIO4 followed by reaction with 3-aminopropyltrimethoxysilane. All techniques adopted for characterization showed that the obtained material is rich in different functional groups and the morphological analyses revealed dimensions in the nanometric range. The hybrid material has been characterized by several techniques showing its polydopamine-like nature, and preliminary observations for dye adsorption have been reported.University of Palermo PRIN2017- 2017YJMPZ

Circulation of SARS-CoV-2 Variants among Children from November 2020 to January 2022 in Trieste (Italy)

Introduction: The ongoing coronavirus disease 19 (COVID-19) outbreak involves the pediatric population, but to date, few reports have investigated the circulation of variants among children. Material and Methods: In this retrospective study, non-hospitalized pediatric patients with SARS-CoV-2-positive nasopharyngeal swabs (NPS) were enrolled at the Institute for Maternal and Child Health-IRCCS Burlo Garofolo, Trieste (Italy), from November 2020 to January 2022. SARS-CoV-2 variants were identified by in vitro viral isolation, amplification, automatic sequencing of the receptor binding domain (RBD) of the SARS-CoV-2 spike coding gene, and subsequent nextgeneration sequencing. The growth curves of the isolated strains were defined in vitro by infecting Vero-E6 cells and quantifying the viral load in the supernatants up to 72 h post-infection by qRT– PCR. The neutralization activity of sera obtained from a COVID-19 vaccinated subject, recovered (2020) patient, vaccinated and recovered (2021) patient, and seronegative subject was assessed by microneutralization assay against the different variants. Results: In total, 32 SARS-CoV-2-positive children, 16 (50%) females, with a median age of 1.4 years (range: 1 day–13 years), were enrolled. The D614G amino acid substitution was detected in all isolated and amplified viral strains. Of the 32 isolates, 4 (12.5%) carried a nonsynonymous nucleotide mutation leading to the N439K (3/4), lineage B.1.258 (∆H69/∆V70), and S477N (1/4) substitution. In 7/32 (21.8%) isolates, amino acid substitutions allowed the identification of a delta variant, lineage B.1.617.2-AY.43, and in 1/32 (3.1%), the Omicron strain (B.1.1.529.BA1) was identified. The growth curves of the B.1, B.1.258 (∆H69/∆V70), B.1.617.2-AY.43, and B.1.1.529.BA1 variants did not show any significant differences. A reduction in the serum neutralizing activity against B.1.258 (∆H69/∆V70) only in a vaccinated subject (1.7-fold difference), against B.1.617.2-AY.43 in a vaccinated subject and in recovered patients (12.7 and ≥2.5-fold differences, respectively), and against B.1.1.529.BA1 variant (57.6-and 1.4-fold differences in vaccinated and in vaccinated and recovered patients) were observed compared to the B.1 variant. Conclusions: SARS-CoV-2 variants carrying the B.1.258 (∆H69/∆V70) and S477N substitutions were reported here in a pediatric population for the first time. Although the growth rates of the isolated strains (B.1.258, B.1.617.2-AY.43, B.1.1.529.BA1) did not differ from the B.1 variant, neutralizing activity of the sera from vaccinated subjects significantly decreased against these variants. Attention should be devoted to the pediatric population to prevent the spread of new SARS-CoV-2 variants in an unvaccinated and predominantly naive population

Immobilization of Ionic Liquids, Types of Materials, and Applications

publishe

Modified nanocarbons as catalysts in organic processes

The application of nanocarbons as useful scaffolds for the production of a wide range of catalytic systems is an ever-growing field as witnessed by the huge amount of research on this topic. Both covalent and non-covalent modifications of nanocarbons represent the main routes to gain access to hybrid nanostructured catalysts. In this chapter the attention will be focused on nanocarbons, namely, fullerene, nanotubes, and graphene, employed for catalytic purposes covering both organocatalytic and metal-based (metal nanoparticles, organometallic complexes) reactions, whereas simple physical mixtures of nanocarbons and metal nanoparticles as well as examples dealing with electrocatalysis or photocatalysis are out of the scope of the present chapter. Because of the large number of publications in this field, we dealt some recent examples that represent a short overview on this topic that are not meant to be exhaustive but merely representatives of the subject

Supported Ionic Liquids: A Versatile and Useful Class of Materials

Supported ionic liquids (SILs) represent a class of materials with peculiar properties and a huge potential regarding their possible applications in different fields of chemistry. Herein, we report our ongoing research about the use of SILs as support for organocatalysts, their role as catalysts themselves, and their application as support and stabilizers of palladium nanoparticles (PdNPs). The use of SILs based materials allowed achieving good results. Moreover, in some cases, after the functionalization of the catalytic species with an ion-tag moiety, a release and catch approach was employed in order to improve the catalytic activity and to facilitate the recovery of the hybrid system formed by the catalyst adsorbed onto SILs materials. All the reported examples demonstrate the versatility of such SILs materials, which can represent powerful tools able to exert a large number of functions