Used-tyres reverse logistic networks in Spain: a global approach.

- Garage repair shop = Responsibility of End-of-use tyres (EUT). Cost and Management - Waste = Limited interest, Undeveloped valorisation market. - Alternatives = Retreading, special sales. - Dumping sites = (Legal and Illegal ones

Identificación y evaluación de la creación de valor mediante la implantación y desarrollo de políticas de responsabilidad social corporativa estratégica

La Responsabilidad Social Corporativa (RSC) sigue constituyendo en la actualidad un área de estudio de elevado interés tanto para la comunidad académica como para los negocios en general. A pesar del gran número de investigaciones realizadas en las pasadas décadas sobre los distintos aspectos que la caracterizan, y la definición generalizada de políticas relacionadas en las compañías más importantes, existen todavía algunos asuntos clave sobre los que se plantean interrogantes fundamentales. La complejidad asociada al constructo RSC y su carácter intrínsecamente dinámico explican en parte esta afirmación. En su aplicación práctica, las dudas sobre la RSC se enfocan hoy en día hacia su implantación con carácter permanente en el día a día de las organizaciones, la relevancia estratégica de las principales iniciativas, o la posibilidad de obtención de beneficios a medio y largo plazo. Se observa de esta forma la traslación de los debates principales hacia las consecuencias más estratégicas de dichas políticas, influenciados por prestigiosos estudios académicos en los que se caracteriza la denominada RSC Estratégica (RSCE), y por las principales organizaciones de certificación de memorias anuales de RSC y sostenibilidad. En este contexto se sitúa el objeto principal de esta investigación, consistente en el diseño de un modelo de implantación de RSCE que permita no sólo identificar los factores más importantes a tener en consideración para su éxito, sino para caracterizar las potenciales formas de creación de valor que pueden surgir de la aplicación del mismo. Se argumenta la elección del tema por considerarse que los asuntos asociados a la RSC no están lo suficientemente explorados desde la visión estratégica más actual, y por constituir la creación de valor el objetivo más crítico dentro de los procesos directivos de planificación estratégica. De esta forma, se utilizan dos metodologías para destacar qué factores son esenciales en la implantación de la RSCE, con qué fines las compañías aplican esas políticas, y qué resultados obtienen como consecuencia: análisis comparativo de casos de estudio y análisis estadístico cuantitativo. Los casos de estudio analizan en profundidad políticas globales de RSCE bajo diferentes puntos de vista, para derivar conclusiones sobre los factores que facilitan u obstaculizan su implantación permanente en las organizaciones. Su desarrollo se estructura en torno a un marco conceptual de referencia obtenido a través de la revisión bibliográfica específica, y se complementa con la información primaria y secundaria de investigación. Por su parte, el análisis cuantitativo se desarrolla mediante tres técnicas exploratorias: estadística descriptiva, regresión múltiple y análisis de componentes principales. Su aplicación combinada va a posibilitar el contraste de aspectos destacados en los análisis de casos, así como la configuración final del modelo de implantación, y la expresión numérica de la creación de valor a través de la RSCE en función de las dimensiones estratégicas consideradas. En consecuencia, los resultados de la tesis se estructuran alrededor de tres preguntas de investigación: ¿cómo se están produciendo y qué caracterización presentan los beneficios que resultan como consecuencia de la implantación de la RSCE en los procesos de planificación estratégica de las compañías?, ¿qué factores esenciales y característicos de la RSCE pueden resultar críticos en los procesos de implantación y futuro desarrollo?, y ¿qué importancia puede tener en el medio y largo plazo el poder de decisión de compra de los consumidores y usuarios finales en la implantación y desarrollo de políticas de RSCE? ABSTRACT Corporate Social Responsibility (CSR) remains a study area of high interest today to both the academic community and businesses in general. Despite the large number of investigations of various aspects of CSR in past decades, and its generalized consideration by the world’s most important companies, there are still some key issues and fundamental questions to resolve. The complexity associated with the CSR construct and its inherently dynamic character, partly explains this statement. In its practical application, doubts about CSR arise today about its permanent implementation in normal business activities, the strategic relevance of related policies, and the possibility of making profits in the medium and long term. It is observed in this way the translation of the main debates towards the more strategic consequences of these policies, influenced by prestigious academic studies that characterize the so-called Strategic CSR (SCSR), and by leading certification agencies of CSR and sustainability reports. In this context, the main purpose of this investigation is to design a model of SCSR for implementation that allows one to not only identify the most important factors to consider for SCSR success, but also to characterize potential forms of value creation that can arise from its application. The selection of this research approach is justified because it is believed that important issues that are associated with CSR have not been sufficiently explored from the aspect of the strategic vision in the current context, and because value creation constitutes the most critical objective within the strategic planning steering processes. Thus, two methods are used to highlight which factors are essential in SCSR implementation processes, the end to which companies apply these policies, and the kind of results that they expect. These methods are: comparative analysis of case studies and quantitative statistical analysis. The case studies discuss in depth SCSR global policies under different perspectives to draw conclusions about the factors that facilitate or hinder permanent implantation in organizations. Their development is structured around a conceptual framework that is obtained by review of specific literature, and is complemented by primary and secondary research information. On the other hand, quantitative analysis is developed by means of three exploratory techniques: descriptive statistics, multiple regression and principal component analysis. Their combined application facilitates a contrast of highlighted aspects in analyzing cases, the final configuration of the implementation model, and the numerical expression of value creation by SCSR as a consequence of the strategic dimensions considered by companies. Finally, the results of the thesis are structured around three research questions: what are the benefits that result from the implementation of SCSR policies in companies’ strategic planning processes?, which essential SCSR factors are potentially critical in the implementation and future development of companies’ processes?, and how decisive in the medium and long term will be the purchase decision power of consumers to the success of SCSR policies

Competence Monitoring in Project Teams by using Web based portfolio management systems

This paper reports a learning experience related to the acquisition of project management competences. Students from three different universities and backgrounds, cooperate in a common project that drives the learning-teaching process. Previous related works on this initiative have already evaluated the goodness of this multidisciplinary, project-based learning approach in the context of a new educative paradigm. Yet the innovative experience has allowed the authors to define a rubric in order to measure specific competences in project management. The study shows the rubric’s main aspects as well as competence acquisition evaluation alternatives, based in the metrics defined. Key indicators and specific reports obtained from data base fields in the web tool will support this work. As a result, new competences can be assessed, such ones like teamwork, problem solving, communication and leadership. Final goal is to provide an overall competence map to the students at the same time they improve their skills

Implantación de una Política de Responsabilidad Social Corporativa Estratégica: Caso de una gran compañía multinacional japonesa del sector de la automoción.

El estudio muestra un modelo conceptual teórico de RSC estratégica desarrollado a partir de las reflexiones e ideas de otros autores. Se realiza un contraste del mismo mediante la elección de un caso real. Concretamente, se elige a una gran corporación japonesa de la automoción para explicar cómo traslada las políticas y procedimientos necesarios para su implantación a lo largo de su compleja red interna de empresas. Los aspectos más característicos y distintivos del caso se exponen finalmente en las conclusiones, indicando las posibles líneas de investigación en estudios posteriore

Educating in Project Management: an innovative approach. A shared-experience among Spanish Universities

This work presents an educational formal initiative aimed to monitor the acquisition and strengthening of competences by students that are being taught in project management subject. Groups of students belonging to three universities, embracing different knowledge areas such as engineering, biology, etc., were selected to run the experience. All of them had nevertheless a common and basic starting point: inexperience in project management field. In this scenario, we propose a new theoretical and practical approach oriented to reinforce problem-solving and related competences in a project management subject context. For this purpose, a Project-Based Learning (PjBL) initiative has been specifically designed and developed. The main idea is to bring a real world engineering project management case into the classroom, where students must face up to a completely new learning approach –groups in different locations, collaborative mode and unspecific solution, supported by a powerful internet platform:.project.net (http://www.Project.net). Other relevant aspects such as project climate, knowledge increasing, have also been monitored during the course. Results show and overall improvement in key competences. The obtained information will be used in two ways: to feed the students back about personal opportunities for improvement in specific competences, and to fine-tune the experience for further initiatives

Improving engineering students' communication competence: designing innovative learning strategies

This research presents an innovative and formal educational initiative that is aimed at enhancing the development of engineering students’ specific competencies when studying Engineering Project Management subject. The framework of the experience combines theoretical concepts, the development of a real-case project carried out by multidisciplinary groups of three different universities, the use of software web 2.0 tools, and group and individual assignments of students that play different roles (project managers and team members). Under this scenario, this paper focuses on monitoring the communication competence in the ever growing Project Management virtual environment. Factors such as corporal language, technical means, stage, and management specific vocabulary among others have been considered in order to assess the students’ performance on this issue. As a main contribution, the paper introduces an ad-hoc rubric that, based on previous investigations, has been adapted and tested to this specific context. Additionally, the research conducted has provided some interesting findings that suggest further actions to improve and better define future rubrics, oriented to communication or even other competencies. As specific Project Management subject concerns, it has been detected that students playing the role of Project Managers strengthen their competencies more than those ones that play the role of Team Members. It has also been detected that students have more difficulty assimilating concepts related to risk and quality management. However those concepts related with areas of knowledge like scope, time or cost have been better assimilated by the students

Conflict resolution to project performance

Conflict resolution is a key issue to manage when dealing with diverse stakeholders. By analyzing in depth the most relevant and implicit aspects of the construct "conflict", this study focuses on examining how the five main strategies in solving common disagreements are adopted by considering different conflict sources. Hypotheses are tested using data collected from both the academic and business world. Perceptions of project managers and team members allows the authors not only to find significant differences by role played or type of organization, but to narrow the design of future approaches to investigate the relation between conflict and project performance. More specifically, the research indicates that project managers adopt confronting and compromising styles in most cases as first options, highlighting the influence of responsibility degree factor in how issues are undertaken within a project team

Final year project: students and instructors perceptions as a competence-strengthening tool for engineering students

This work indicates the importance of the Final Year Project (FYP) in the strengthening of competences of engineering students. The study also shows which personal competences of students are reinforced most during the FYP process,including the preparation, elaboration, presentation and defence stages. In order to gather information on this subject, a survey was conducted at two different Spanish technical universities—one public and one private—and a comparative analysis was performed of the questionnaires collected. The competence model considered is that used by the Accreditation Board for Engineering and Technology (ABET), since the official title of the public university has been accredited by this model. The results indicate which personal and professional competences of students are reinforced well by undertaking the FYP. Any significant differences in response by university are explained in the study. For validation purposes, the results were contrasted with the instructor’s perspective using the triangulation methodology. Finally, the conclusions drawn will permit the design of new study plans to cope more effectively with the challenges of the FYP in the new Bologna framework

Forecasting Project's evolution. A step forward from the EVMS.

The goal of this work is to define a framework for project forecasting activities as well as to set up proposals regarding improvement for some of the tools involved in these processes. In particular attention will be payed to Earned Value Management System (EVMS) tool as it is a well known instrument for project monitoring and, in some cases, for project forecasting too. Main inn ovation in this work is the proposal for estimation SPI and CPI indexes on the next future of the project in accordance to their previous values as well as to the impact in the project of non technical factor slike team construction, common vision for the project and other managerial aspects related to it. Anew model is provided in this paper allowing to process surveys based information from the project team in order to adjust the estimation for next values of already mentioned EVMS indexes, in order to produce a more consistent forecasting for the project evolution

Strengthening and measuring project management competences of engineering students

Since 2010 the Industrial Engineering School at Universidad Politécnica de Madrid (ETSII UPM) has its Plan Study accredited by ABET. Since then a big motivation has been promoted from the management team encouraging teachers to work on the measurement and strengthening of student¿s competences. Generic skills or behavior acquired significant importance in the workplace, particularly in relation to project management. Because of this, and framed within the requirements of the European Higher Education Area (EHEA), the curriculum of the new degrees are being developed under the competence-based learning. This situation leads to the need to have a clear measurement tool skills as a basis for developing them within the curriculum. A group of multidisciplinary teachers have been working together during two years to design measuring instruments valid for engineering students