In-situ probes for antenna array calibration

A novel calibration network for patch antennas is proposed. We introduce magnetically coupled in-situ probes, which excite the fundamental patch mode. In that way, finite array effects and mutual coupling can be detected, providing the opportunity for online calibration. The specific advantages of the approach are demonstrated for linearly polarized patch antennas. Measurement results of a single patch with the integrated probes agree with simulation. A two by two antenna array with in-situ probes is simulated to demonstrate the calibration accuracy in theory

Towards a Generic Model for MU-MIMO Analysis Including Mutual Coupling and Multipath Effects

A network model which accounts for antenna mutual coupling and multipath effects in a wireless channel is proposed as a tool to qualitatively evaluate the performance of a multi-user multiple-input multiple-output (MU-MIMO) system. The system performance is assessed when a zero-forcing (ZF) beamformed conventional uniform linear array (ULA) and a sparse array are employed as one sector of a base station antenna (BSA) in a single-cell network. It is shown that highly correlated user equipments (UEs) in a line-of-sight (LOS) scenario can be decorrelated to some extents, by a scattering environment in a non-line-of-sight (NLOS) scenario. This occurs due to increase of the spatial variation by a multipath effect. Furthermore, in both environments a sparse array realized by an increased interelement spacing is also capable for correlation reduction among users due to the narrower beams

A System-Performance-Based Comparison of Sparse Regular and Irregular Antenna Arrays for Millimeter-Wave Multi-User MIMO Base Stations

A system-level study was conducted that evaluated the system performance of various dense and sparse antenna array configurations for application in millimeter-wave multi-user multiple-input multiple-output base stations. The performance was evaluated by investigating the probability that a user experiences an outage when a zero-forcing pre-coder is used in a random line of sight scenario. This paper shows that the outage probability significantly decreased when irregular sparse arrays were used rather than regular sparse or regular dense arrays. A re-configurable linear array was designed and realized as a demonstrator. It used 3D-printed aluminum box horn antenna elements that had wide scanning range in the azimuthal plane and a small scanning range in the elevation plane. For the demonstrator, it was shown that the outage probability was reduced from 3.85% to 0.64% by moving from a sparse regularly spaced array to a sparse randomly spaced array. This amounted to an improvement of a factor of six. The sparse topology allowed for the usage of large antenna elements that had an increased gain and still achieved wide-angle scanning, while reducing mutual coupling to a minimum

Cell Partitioning Antenna System Performance in Multi-User Scenarios for mmWave Communications

Fixed-beam, high-gain antenna systems can be used for a finer partitioning of the currently used cell-sectoring. This partitioning has the benefit of reducing the number of users seen per antenna beam, which reduces interference. Furthermore, the high antenna gain allows for a high effective isotropic radiated power while keeping the transmit power low. In this paper, we study the performance of such a fixed-beam, high gain antenna system design for millimeter-wave mobile communications. The antenna system is designed to keep the inter-sector interference in a multi-site scenario low. The performance is analyzed for single- and multi-user environments. In single-input single-output mode, the 50th percentile of the signal-to-interference-plus-noise ratio lies between 12.5 dB to 39.7 dB if 3 to 0 interferers are present, respectively. For multiple-input multiple-output transmission using zero-forcing, the signal-to-interference-plus-noise ratio increases and the 50th percentile ranges from 36.1 dB to 43.3 dB if 3 to 0 interferes are present, respectively. By using maximum ratio transmission, the best performance is achieved with no interferers present, while a plunge in performance is observed with interferers. Furthermore, the study revealed that the narrow beam antenna system can also provide a clear signal separation for small spatial separations. In the given example, the signal-to-interference-plus-noise ratio is larger than 32.1 dB with 11 active antenna elements, where 2.8 meters separate the users. Hence, the paper shows that the cell-partitioning antenna systems provide coverage in the desired area while keeping the inter-sector interference low, and the considered transmission techniques can be used for situation optimized mobile communication links

5G RAN architecture based on analog radio-over-fiber fronthaul over UDWDM-PON and phased array fed reflector antennas

This manuscript introduces a 5G radio access network architecture concept based on ultra-dense wavelength division multiplexing (UDWDM) and incorporating an optical fronthaul network that uses a novel wireless antenna system for radio frequency transmission and reception. A ring topology is proposed where optical signals travel within the 5G UDWDM passive optical networks and millimeter waves are generated in the optical line terminals by optical heterodyning. The wireless transmission of the millimeter waves is conducted by an innovative phased array fed reflector antenna approach for mobile communications that grants high antenna gain due to highly focused radiation characteristics, as well as multiplexing gain by multiple beam generation. Furthermore, beam steering is provided by a radio frequency analog beamformer network. Finally, implementation options synthesizing the total system are discussed

Measurement of the absolute spectral responsivity in the mid-infrared based on the cryogenic electrical substitution radiometer and an optimized thermopile detector

The Physikalisch-Technische Bundesanstalt (PTB) expanded its capabilities of the absolute measurement of radiant power to the spectral range of the mid-infrared (MIR) by implementing additional MIR laser radiation sources at one of the PTB's cryogenic electrical substitution radiometer facilities. This extension enables absolute calibrations of the spectral responsivity of detectors in the MIR traceable to the International System of Units (SI). The thermopile detector TS-76 was characterized and calibrated in view of its spectral responsivity s(λ) in the wavelength range between 1.5 and 10.6&thinsp;µm at the expanded cryogenic electrical substitution radiometer facility. The relative standard measurement uncertainty was significantly reduced to 1.4&thinsp;% by developing an optimized and thermally stabilized detector housing design. The TS-76 was established as a mid-infrared transfer detector for the SI traceable measurement of radiant power and the dissemination of the spectral responsivity s(λ) in the MIR.</p

High data rate W-band balanced Schottky diode envelope detector for broadband communications

This article reports on a W-Band (75–110 GHz) Schottky diode based balanced envelope detector in microstrip technology, featuring a transition from WR-10 to microstrip. The manufactured detector provides 20 GHz of input RF bandwidth within the W-band. A video bandwidth between 4 GHz and 6 GHz is achieved for input RF frequencies between 75 GHz and 88 GHz, allowing error free transmission of signals up to 12 Gbit/s

High data rate W-band balanced Schottky diode envelope detector for broadband communications

This article reports on a W-Band (75–110 GHz) Schottky diode based balanced envelope detector in microstrip technology, featuring a transition from WR-10 to microstrip. The manufactured detector provides 20 GHz of input RF bandwidth within the W-band. A video bandwidth between 4 GHz and 6 GHz is achieved for input RF frequencies between 75 GHz and 88 GHz, allowing error free transmission of signals up to 12 Gbit/s