Aminosilane as an effective binder for hydroxyapatite-gelatin nanocomposites

Aminosilane has been explored as an alternative chemical linker to facilitate the binding and solidification of hydroxyapatite-gelatin nanocomposite at room temperature, which was synthesized using co-precipitation method in the presence of gelatin. This aminosilane treatment was found effective at low concentration (~25 μL/mL) and the solidification and dehydration of hydroxyapatite-gelatin slurry completes within hours depending on the amount of aminosilane. The resulting sample exhibits compressive strength of 133 MPa, about 40% higher than glutaraldehyde treated samples, and shows good biocompatibility based on cell adhesion, proliferation, alkaline phosphate synthesis, and mineralization studies

Direct scaffolding of biomimetic hydroxyapatite-gelatin nanocomposites using aminosilane cross-linker for bone regeneration

Hydroxyapatite-gelatin modified siloxane (GEMOSIL) nanocomposite was developed by coating, kneading and hardening processes to provide formable scaffolding for alloplastic graft applications. The present study aims to characterize scaffolding formability and mechanical properties of GEMOSIL, and to test the in vitro and in vivo biocompatibility of GEMOSIL. Buffer Solution initiated formable paste followed by the sol-gel reaction led to a final hardened composite. Results showed the adequate coating of aminosilane, 11–19 wt%, affected the cohesiveness of the powders and the final compressive strength (69 MPa) of the composite. TGA and TEM results showed the effective aminosilane coating that preserves hydroxyapatite-gelatin nanocrystals from damage. Both GEMOSIL with and without titania increased the mineralization of preosteoblasts in vitro. Only did titania additives revealed good in vivo bone formation in rat calvarium defects. The scaffolding formability, due to cohesive bonding among GEMOSIL particles, could be further refined to fulfill the complicated scaffold processes

Electrochemical Properties of Silver Nanoparticle Doped Aminosilica Nanocomposite

The electrochemical properties of silver nanoparticle (d∼ 5 nm) synthesized within aminosilica film from spontaneous reduction reaction were examined using cyclic voltammetry and the results show that the nanocomposite film exhibits similar redox property as solution-synthesized silver nanoparticles when measuring in phosphate buffer solution and its redox potentials were found to be sensitive to the presence of chloride ions. It also shows that silver nanoparticles and hydrolyzed aminosilica increase the electron diffusivity of the aminosilica film. Both results confirm that an accurate reference electrode suitable for microfluidic devices can be created simply by treating an aminosilica-coated electrode with a silver nitrate solution. Furthermore, a humidity sensor based on silver-silica nanocomposite film has also been demonstrated

Formation of AgCl Cubic Crystals Induced by Shrinkage of Sol–Gel Silica Film

Growth of AgCl cubic crystals at the surface of sol–gel silica films containing AgCl nanocrystals and poly­(ethylene glycol)/ethylene glycol as diffusion-controlled media has been successfully demonstrated. Crystals were grown during the shrinking of the film when it was exposed to air at room temperature, and both size and shape of the crystals were found to be dependent on the film thickness. When the film thickness was in the range of 70–250 nm, cubic shaped crystals with size between 120 and 250 nm were produced. These cubes exhibited predominant {200} facets as indicated by the electron beam diffraction patterns. Spherical crystals with size and height between 200 and 400 nm were observed when film thickness was in the range of 250–400 nm, while elliptical crystals were found on films thicker than 400 nm. Crystals were not grown when the film thickness was <25 nm. These results suggest that sol–gel silica films can be utilized as a nanocrystal reservoir to grow crystals of desired size and shape with their locations controlled by the pattern of the film

Direct scaffolding of biomimetic hydroxyapatite-gelatin nanocomposites using aminosilane cross-linker for bone regeneration

Hydroxyapatite-gelatin modified siloxane (GEMOSIL) nanocomposite was developed by coating, kneading and hardening processes to provide formable scaffolding for alloplastic graft applications. The present study aims to characterize scaffolding formability and mechanical properties of GEMOSIL, and to test the in vitro and in vivo biocompatibility of GEMOSIL. Buffer Solution initiated formable paste followed by the sol-gel reaction led to a final hardened composite. Results showed the adequate coating of aminosilane, 11–19 wt%, affected the cohesiveness of the powders and the final compressive strength (69 MPa) of the composite. TGA and TEM results showed the effective aminosilane coating that preserves hydroxyapatite-gelatin nanocrystals from damage. Both GEMOSIL with and without titania increased the mineralization of preosteoblasts in vitro. Only did titania additives revealed good in vivo bone formation in rat calvarium defects. The scaffolding formability, due to cohesive bonding among GEMOSIL particles, could be further refined to fulfill the complicated scaffold processes