43 research outputs found
Recommended from our members
Microwave absorption and radiation from large-area multilayer CVD graphene
Here we experimentally study the microwave absorption and near-field radiation behaviour of
monolayer and few-layer, large-area CVD graphene in the C and X bands. Artificial stacking of CVD graphene reduces the sheet resistance, as verified by non-contact microwave cavity
measurements and four-probe DC resistivity. The proposed multilayer stacked graphene exhibits increased absorption determined by the total sheet resistance. The underlying mechanism could enable us to apply nanoscale graphene sheets as optically transparent radar absorbers. Near-field radiation measurements show that our present few-layer graphene patches with sheet resistance more than 600 /sq exhibit no distinctive microwave resonance and radiate less electromagnetic power with increasing layers; however, our theoretical prediction suggests that for samples to be significant as microwave antennas, doped multilayer graphene with sheet resistance less than 10 /sq is required.This work was funded by the Graphene Research Centre, University of Cambridge, and the
Engineering and Physical Sciences Research Council (EPSRC), UK under a Program Grant
(EP/K01711X/1). M.T.C thanks the Winston Churchill Trust and the International Young
Scientist Research Fellowship, National Natural Science Foundation of China, for generous
financial support. B.W. acknowledges the fund support from the China Scholarship Council and National Natural Science Foundation of China No. 61271017.This is the FINAL published version, also available on the publisher's website at: http://www.sciencedirect.com/science/article/pii/S000862231400540
Impact of switching from intravenous to oral linezolid therapy in Japanese patients: a retrospective cohort study
Metal backed versus all-polyethylene unicompartmental knee arthroplasty: the effect of implant thickness on proximal tibial strain in an experimentally validated finite element model
Objectives Up to 40% of unicompartmental knee arthroplasty (UKA) revisions are performed for unexplained pain which may be caused by elevated proximal tibial bone strain. This study investigates the effect of tibial component metal backing and polyethylene thickness on bone strain in a cemented fixed-bearing medial UKA using a finite element model (FEM) validated experimentally by digital image correlation (DIC) and acoustic emission (AE). Materials and Methods A total of ten composite tibias implanted with all-polyethylene (AP) and metal-backed (MB) tibial components were loaded to 2500 N. Cortical strain was measured using DIC and cancellous microdamage using AE. FEMs were created and validated and polyethylene thickness varied from 6 mm to 10 mm. The volume of cancellous bone exposed to 3000 µε and > 7000 µε maximum principal (tensile) microstrain was computed. Results Experimental AE data and the FEM volume of cancellous bone with compressive strain < -3000 µε correlated strongly: R = 0.947, R2 = 0.847, percentage error 12.5% (p < 0.001). DIC and FEM data correlated: R = 0.838, R2 = 0.702, percentage error 4.5% (p < 0.001). FEM strain patterns included MB lateral edge concentrations; AP concentrations at keel, peg and at the region of load application. Cancellous strains were higher in AP implants at all loads: 2.2- (10 mm) to 3.2-times (6 mm) the volume of cancellous bone compressively strained < -7000 µε. Conclusion AP tibial components display greater volumes of pathologically overstrained cancellous bone than MB implants of the same geometry. Increasing AP thickness does not overcome these pathological forces and comes at the cost of greater bone resection
A rare case report of acyclovir-induced immune thrombocytopenia with tongue hematomas as the first sign, and a literature review
Near-field characterization of chemical vapor deposition graphene in the microwave regime
Near-field measurements were performed at X-band frequencies for graphene on copper microstrip transmission lines. An improvement in radiation of 0.88 dB at 10.2 GHz is exhibited from the monolayer graphene antenna which has dc sheet resistivity of 985 Ω/sq. Emission characteristics were validated via ab initio simulations and compared to empirical findings of geometrically comparable copper patches. This study contributes to the current knowledge of the electronic properties of graphene. © 2013 AIP Publishing LLC