THE STUDY OF BATTING PERFORMANCE OF DIFFERENT MATERIAL BAT

The purpose of this study was to compare the velocity of sweet spot and batted-ball velocity during swing different material bat. Three collegiate baseball players randomly swung five different material bats. The high-speed video (2000 fps) was placed 7 meter above subject to capture swing image. The swing velocities of sweet spot before impact, after impact and batted-ball velocity were calculated. The results reveal that batted-ball velocity of bamboo bat and compound bat were between alloy bat and wood bat. There are significant correlations among bat velocity before impact and batted-ball velocity. We suggest that the bamboo or synthetic material of wood and bamboo were suitable to produce baseball bat. Moreover, it is very economy and safer than alloy bat

A Novel Thin NIPAM Gel Cassette Dosimeter for Photon-Beam Radiotherapy

The response of thin polymer gel cassettes (called NIPAM gels) to ionizing radiation was investigated in this study. The NIPAM gels were prepared from gelatin, N-isopropyl acrylamide, tetrakis (hydroxymethyl) phosphoniumchloride, and N,N′-methylene-bis-acrylamide. Gel cassettes were irradiated in a phantom using a linear accelerator, and the polymerization morphology of irradiated NIPAM gel was characterized using scanning electron microscopy. The dose-response sensitivity of the NIPAM gels was evaluated using the differences in optical densities. The optical densities were obtained using a computer-controlled CCD camera that was connected to a planar illumination source for acquisition of optical transmission images. The central axis depth dose profiles of the phantom were extracted, and a comparison with ionization chamber measurements demonstrated similarities in profiles. The sensitivity, linearity of the response, accuracy, and reproducibility of the polymer gel cassettes were acceptable. However, the profiles of the half-blocked field irradiation showed no significant dispersion in the visible region. This study also extensively investigated the spatial stability of the NIPAM gel. The results showed that the gel cassette response remains stable for up to three months after irradiation

THE CHARACTERISTICS OF BASEBALL BATS MANUFACTURED BY DIFFERENT MATERIALS

Bamboo is a new material to manufacture baseball bat which has the low cost and fast life cycle advantages. But there is no research has been done to study the performance of bamboo bat. This research used three non-destructive testing (NDT) methods including ultrasonic testing method, stress wave testing method and tap tone frequency analysis system (TTFAS) to determine the performance difference among different bat materials. The testing specimen were five baseball bats using four different materials (bamboo, bamboo& wood, wood, and aluminum). The results showed that there are significant correlations among three NDT methods in bats transmit velocities. Therefore, TTFAS method was selected to analyze the characteristics of different material baseball bats because of its low cost and simplicity for the experiment. The results showed the longitudinal and transverse first natural frequencies for each material and the longitudinal and transverse dynamic modulus of elasticity (MOEd). Based on dynamic modulus of elasticity, the stiffness of aluminum bats was higher than the others

Dengue Virus Infects Primary Human Hair Follicle Dermal Papilla Cells

During the epidemic of the dengue virus (DENV) infection in Taiwan in 2014 and 2015, we observed an abnormally high frequency of increased scalp hair shedding in infected individuals that could not be explained by telogen effluvium. In this study, the mechanism of hair loss caused by DENV was explored. Human hair follicle dermal papilla cells (HFDPCs) are essential for hair follicle morphogenesis and cycling. Thus, we established an in vitro DENV infection model in HFDPCs. On immunofluorescence analysis, HFDPCs that were susceptible to DENV infection responded to type I interferon (IFN) treatment, and the cells showed antibody-dependent enhancement (ADE) effect. The expression of the pro-inflammatory cytokines, interleukin 6 (IL-6), and tumor necrosis factor-alpha (TNF-α), revealed an inflammatory response in DENV-infected HFDPCs. In particular, DENV infection impaired cell viability, and it activated caspase-associated cell death signaling in HFDPCs. In conclusion, our data indicate that direct infection with DENV causes inflammation and cell death in HFDPCs, which is involved in the mechanisms of hair loss after DENV infection. The knowledge of DENV infection in an immune-privileged tissue, such as hair follicles, may suggest their use for further studies on post-dengue fatigue syndrome (PDFS)

Refrigerant- Lubricant Mixture Properties Influencing Bubble Dynamic Parameters and Heat Transfer Coefficient in Nucleate Pool Boiling

We have been successfully developed a model regarding lubricant effect on individual processes of bubble nucleation, growth and departure period for nucleate pool boiling heat transfer. In this study, three type POE refrigeration lubricants with different refrigerant miscibility (POEA/POEB/POEC), two viscosity grades (ISO68 & 170), three kind of refrigerants (R-134a/R-1234ze/R-134yf), and three different saturated temperatures (10℃/0℃/10℃) are taken into calculation under different heat flux ranging from 10 KW/m2 to 80 KW/m2. Based on this model, a knowledge of chemical structures and physical properties of lubricant and refrigerant is sufficient to get bubble dynamic parameters and predict the boiling performance near metal surface. According to calculating results, several key factors play an important role in pool boiling heat transfer and show drastic influence on bubble parameters and HTC, such as refrigerant type, saturated temperature, heat flux and lubricant concentration. Regarding lubricant chemical structure effect on heat transfer performance, it will be direct related to OCR and following influence on HTC in real evaporator environment. But if keeping same lubricant concentration, different results will appear. Various lubricant structures may provide different volume size, adsorption energy on metal surface and interaction force between refrigerant and lubricant, but these factors sometimes offset each other and lead to only a slight difference in bubble size, contact angle, surface coverage concentration, and HTC. The calculation indicates that the presence of lubricant imposes a negative effect on HTC during waiting period of bubble formation and departure period, but a positive effect on HTC may prevail in bubble growth period. Such two effects compete during the boiling process and could lead increase or impair heat transfer performance at a low lubricant concentration

Indoor Depth Completion with Boundary Consistency and Self-Attention

Depth estimation features are helpful for 3D recognition. Commodity-grade depth cameras are able to capture depth and color image in real-time. However, glossy, transparent or distant surface cannot be scanned properly by the sensor. As a result, enhancement and restoration from sensing depth is an important task. Depth completion aims at filling the holes that sensors fail to detect, which is still a complex task for machine to learn. Traditional hand-tuned methods have reached their limits, while neural network based methods tend to copy and interpolate the output from surrounding depth values. This leads to blurred boundaries, and structures of the depth map are lost. Consequently, our main work is to design an end-to-end network improving completion depth maps while maintaining edge clarity. We utilize self-attention mechanism, previously used in image inpainting fields, to extract more useful information in each layer of convolution so that the complete depth map is enhanced. In addition, we propose boundary consistency concept to enhance the depth map quality and structure. Experimental results validate the effectiveness of our self-attention and boundary consistency schema, which outperforms previous state-of-the-art depth completion work on Matterport3D dataset. Our code is publicly available at https://github.com/patrickwu2/Depth-CompletionComment: Accepted by ICCVW (RLQ) 201